Hi Eric, I'm sorry, I can't remember the size of the wheel I used! And I've since given the set to another Amel owner (in France) who has used it to do his decks. But I found that a wheel half the

Hi Roy, The link you sent does not have a 3/16" striper. I ordered this on. Is this the one you used?

Back in January Ian & Judy on Pen Azen posted a note on how they solved the problem on preventing debris from entering the bilge from the galley and head sinks. Another method that I'm trying involves

Hi Eric, Here's where I bought my striper: http://www.misterart.com/store/view/001/group_id/2841/MASTER-Single- Line-Striper-Set.htm It's an art supply store. Good luck, Roy <kimberlite@...>

John, i couldn't find that website. Fair winds, eric sm 376 kimberlite <annejohn@...> wrote: programmed minute take the carefully to sent them which the Model stripes if site.

I have a 30amp plus a 50amp charger. They are It seems to me programmed sso that the 30 should be turned on first and the other after a minute od so to let the charge rate stabilise. The 50amp one

Roy, where do i find an embee paint striper. i found one with 6 wheels but not with 8 wheels. thanks eric sm 376 kimberlite

Hi John, Sounds right to me. The water comes out of the engine exhaust loop, not the generator exhaust. It is meant to reassure you that the intake seacock is open and that the impeller is working,

Hi John, With great interest I followed your experience with the "Algae-X Fuel Filter". It sounds terrific! However, after studying the respective web-page I still have no clue what size unit I will

Can anyone tell me how much, if any, water is normally supposed to come out of the little pipe that vents out of the engine room from the top of the anti siphon loop above the engine, and vents/drains

Id like to thank the gentleman on this net who wrote a few years ago about installing an Algae-X fuel filter in his SM to eliminate the constant black streak problem from the engine exhaust. I bought

Hi Lynda, Can you give me some idea of the price and age etc. of the 53 you sold, whether VAT paid etc. so I can check my insurance as no one answered my earlier posting seeking help before I over or

Hi Chris I have recently sold an Amel 53 and am looking something smaller. Can you advise what price she is for sale at. Also forward details of her general condition, location in Spain etc. I

Hi everyone Just wanted to let you know that I own a 1980 Sharki (hull nr 24) and have sadly decided to sell her. She is located in Spain and if anyone would like more details please let me know.

I replaced the old water heater with the 11 gal. Force 10. You can have Chuck at Sailorman order one if he doesn't have it in stock. It is 110V and engine heated. SS outside box, with aluminum

Hi, I also just replaced my hotwater maker by a isotemp heater. Amel Hyeres did recommend this type and I have red a product evaluation where that came out as best product. I think that is acutally

Gary, your photos of stripping down the watermaker proved invaluable. Many thanks. I think I may be able to add one suggestion. I struggled unsuccessfully with two strap wrenches to remove the end

Do you have any more details on the seals for the bowthruster. Actual sizes and where to get them? I am in Venezuela and leaving for the ABC's this week. And just noticed oily water seeping from

Hi, I just replaced mine with an isotemp heater. Very little work required. I just had to extend the exhaust pipe on the generator to fit in the heater. I believe that is the one that Amel is now

Terry, As part of the refit on my 1989 SM, I replaced the original water heater with an Isotemp all stainless steel unit. As a matter of comparison, after running the diesel for 45 minutes during