Thank You gary This is very helpfull. Vito wrote: (Reverse Osmosis) a rather bought processes. This production was a drop cost. Dessalator, Water, and the same. I is 776-461-0256. site shows

As far as I can determine there is only one manufacturer of RO (Reverse Osmosis) membranes in the world. That manufacturer is FilmTec. FilmTec was a rather small company that manufactured membranes

Hi Vito, How many hours have you done on your watermaker and is it the 60 or 150l p h version? We test ours just by drinking it and after 1300 hours its fine. We lay up now for about 6 months of the

FROM: "LADY DIVINA" SM317 I FOUND THAT AN ADJUSTMENT TO THE BOWTHRUSTER ON SM317 SOLVED THE SEAWATER INTRUSION PROBLEM WHILE AT SEA. I LOWERED THE BOLT(w/PIN HOLE) ON TOP OF THE MOTOR UNIT BY

Hello from Fiji Well of course problems will crop up in the most remote places. I recently bought a water saltinity tester. The water coming from the watermaker is testing at 1200 PPM. The water from

I had a similar baffling experience last year with the same faucet. After doing all the usual stuff I found it was actually a leak from the supply pipe. Behind the head under the shelf access panel

try removing the nozzel head and cleaning the screen. "callisto" 369 pellegrini1942 <afpellegrini@...> wrote: I have an SM 2000 and am experiencing problems with cold water pressure. The cockpit

Hi ROger I'm using on my SM the Bauer Junior II to my entire satisfaction. My advice is dont get away from serious brand such as this one. It is may be more expensive than the rest but it is worth it.

Hi Roger, We have the Poseidon Junior 11 with electric drive. Neat installation.Noisy ( tell me a compressor that isnt!) but fills an empty bottle in about 28 minutes. Very happy with it. Cheers, Ian

Dear John, Am I right to recall that you are an enthusiastic owner of a Kiwi built RIB with an aluminium hull? If so can you send me the details? I am looking at the Southern Pacific Sheerwater,

Hello, Amel owners/adventurers, Just to introduce myself to the group, having ordered a new 54 some 10 days ago. She won't be delivered till September 2008! But, judging from the wonderful day of

To my regret, I am selling my 1994 SM. Any interested parties may contact me at the above address. Thank you.

I have cleaned all the filters on the faucets, but it did not make much difference. The pressure in the cockpit shower is good so the problem must be in the line to the forward head. I will work

1- it is not a leak. If it was the pump would be running permanently 2- If you have pressure in the other cold water faucets, it must be either a kink in the cold line to the forward head or a clog in

I have an SM 2000 and am experiencing problems with cold water pressure. The cockpit shower is fine, but the forward head faucet has almost no pressure. The mix of hot and cold is OK, but not as

Sometimes the screen filters located at the water outlet of the faucets get clogged with debris and calcium build up. Unscrew the filter and clean it. This may help, particularly if the problem is

Dear John, I am also very interested becouse I ordered the AMEL 54 delivery in June 2008! Could you be more specific on the type of passarelle you are using. I was thinking something light (for my

If I was ordering a 54 I would ask for the following (which it may already have as I have not seen one and the Amel website does not contain enough details). Have the B&G instruments fully interfaced

I took delivery of no 21 at end March in Hyeres. I don't know where you are but if you require a Mediterranean type stern passerelle, don't get the (current) Amel version. It is very awkward to

We pulled our Autoprop for service, thus draining the oil for the U- drive. Looking for verification of weight of oil for replacement. Notes we have from previous postings on this website state