Having just purchased my 2003 Super Maramu, I would like to give the whole engine room and everything in it a clean and also give it some sort of protection against futher corrosion. Could anybody

During the process of selecting an Amel to purchase I viewed serveral that had protected the horizontal mahogany surfaces with a quite thick clear vinyl/silicon sheet. The material adheared very well

It is not possible to rotate the drum of my Thomson washing machine both when it is powered off and on. When I try and run the machine it stops and the change filter light flashes. Having searched

My electric bilge pump is running but not pumping water. After searching the archives I have concluded that I need to take the pump portion appart in order to clean and possible replace the pump

I have a 1985 Maramu with electric roller furling on both main and headsail. Unlike more recent models, there is no obvious way to disconnect the motors and be able to manually operate the rollers

Hi Roy: I just re-read your post on painting the deck stripes in preparation to doing my decks. I have been able to purchase some Penetrol (the US equivalent of Polytrol) from Budget Marine in

My boat is currently in the Hudson River 30 mi north of New York City - In Haverstraw New York. The boat is a 1981 and is mechanically sound. We updated the elctronics a couple of years back. It has

Hi, Bill. Where's your boat located? Could you send me the details: @ svresolute@.... Thanks, Howard wrote:

I don't have info on the Mango, But I have a Maramu for sale and I do have the specs available for this. Bill Klein <svresolute@...> wrote: group. My cockpit I've a "48.5". The two?

<svresolute@...> wrote: Hello, again. Sorry for the confusion in the Subject line. I meant Maraumu, not Mango. And looking through prior posts, it appears that the 46 and the 48 are the same size

I think you will find that about 20/25 years ago French boats changed to using LOA in their model number previously it was i think LOD. So to compete in a market where every last inch was

Hello, everyone, my name is Howard Berger. I'm new to the group. My wife Lynda and I haved looked at a Maramu 46 (the best open cockpit I've ever seen in a boat) which we're considering purchasing,

Hi John & Anne Thanks for the response. When we bought Zorba the vanity had been removed in order to widen the bed, which made the cabin quite unusable in the sense of room to move around, access

Roger, The vanity is the kneehole desk with mirror and stool. John and anne Annie M Mango #1

Hi John & Anne Which piece of the owner's cabin are you calling the "vanity"? Regards, Roger Message from Roger Banks Mobile: 0407 91 4601 Home: +61 2 6291 4601

We are restoring Mango #1 and Anne suggested that she would like to convert the vanity in the master to a chest of drawers. Would appreciate input as to how often the vanity is actually used. Best

Would you be interested in a very well maintained 1985 Maramu, berthed in S. Florida? Jim ____________________________________________________________________________________ Never miss an email

My SM 2000 (2002 #369) has the faux suede tan cushions. Does anyone know if these are machine washable? Thank You. Peter Pappas - Mazatlan,Mexcio. "Callisto"

Regrettably, due to career changes my wife and I must sell our beloved Amel Maramu "Popeye". She is fully equipped with watermaker, SSB, chartpotter, radar, wind generator, gen set etc....

Amel advised us that the cushions are washable. We did wash one cover in the machine on the boat , let it air dry and it came out fine. The other cushions require a bigger washing machine than the