Hello, Can you please send some photos and info? My mail address is jose.luis.isasi@... Thanks. JL <syhanaleism@...> wrote:

Amel Kirk, Year 1978, No. 229, one Swiss owner, sailed on Lake of Constance, Teak deck, many extras, EU 35'000.--; please ask for the documentation.

I had to replace the stop cock on the forward holding tank as the old one seized up. The local chandlery sold replacements..in bronze as the original for about US$10 or in stainless for $50. It was

Bob, I ordered new valves myself because the old ones are a little hard to turn off and on. The fiberglass around the valves on the holding tanks seem to be more decorative then anything. Its above

I have a spare brand new (hoisted a couple of times but not used) Super Maramu Ballooner for sale. I'll sell for $1,200 plus actual UPS or Fedex shipping cost (only to US or Canada address,

Amel recommends replacing or rebuilding the "sea water valves" in their maintenance schedule. In their owners manual they refer to these as "stop cocks". I obtained replacement stop cock valves for

I had similar trouble with my 160 l/hr watermater on SM # 335. This behavior began about 6 months after it was new (about the time we set off across the Atlantic). The 20 amp breaker would trip

Hello fellow members, We are the new owners of SM266. Question, I run the generator (we are on the hook in the BVI) and the green light comes on, on the 220V panel. I deperess the breaker to turn on

Joe, Craig's advice is spot on, we follow the same approach. I use a relatively inexpensive (~$80) magnifying loupe to inspect the fittings -- you need somehting like that to be able to see a very

Joe, Robin's repy points out quite clearly the "mysticism" of rigging lifespan. Too many factors impinge - many years in the tropics - bad; many heavy weather sails - bad; a berth with a "jerky" chop

15 Feb 2006 Hi all: I just completed installation of new FilmTec SW30-2540 membranes ($177.00 each from Air, Water, and Ice, Inc.) in my water maker. Not a difficult job one accomplished.

The answer to my earlier question is that 1/2 cm of movement is entirely normal. Ian Jenkins, Pen Azen,Santos, Brazil.

thank you amelliahona <no_reply@...> wrote: --- In amelyachtowners@..., "pjppappas" <pjppappas@...> wrote: vollt, 50 watt). There are also surely direct replacements (size,

Frankly I would talk to your insurance company - some will not cover rigging failure after 10 years unless it has been tested, others don't mind. For peace of mind we replaced ours after 14 years

seem very large for most forward looking sonars such as EchoPilot and Interphase? What do these transducer do to sailing performance on the Amel Super Maramu? Are the sonars practically useful for

Does anyone have performance polars for the Super maramu. You need them to use the weather routing function of Max Sea. Can you e-mail them to me or - better - post them to this site

vollt, 50 watt). There are also surely direct replacements (size, wattage & voltage from other manufacturers. Regards, Gary Silver, Amel SM Hull # 335

Can anyone tell me the recomended life span of the standing rigging on a santorin. Thanks

My wife and I will be selling our Mango this year. It is currently located in Puerta Vallarta , Mexico. Interested parties can contact me at _silkair@... (mailto:silkair@...) Michael

To the AMEL owners group. For the deck lamps on the main and mizzen, I use a military application lamp with a hardened filament. I have them on the boat now and I believe they are General Electric