Hi Ian: Thanks for your reply. Wonderful to hear how well the new board is working. A couple of questions: "I am not sure if my new board does contain an automatic reverse flush or not I received no

Hi Charlie, My thanks to you and all the others that replied concerning faulty readouts on the chain counter. I don't think it is the display itself as that works normally and zeros when told etc. It

John I had my charger cease to give any output when the fan failed causing the overheat sensor to shut it off. If you are in a hot climate, have you allowed it to cool down and se if it starts up for

Hi Gary, I am not sure if my new board does contain an automatic reverse flush or not I received no documentation. However, there is an unused edge connector which might perhaps be used for reverse

Patrick, It is a great tool. I printed Gary's pic of it and took a small vice grip to my local machine shop and they made me one in about 10 minutes for peanuts. Best wishes, John,

I have also found the search function not working. Gary

Anyone may reach me about the impeller removal tool or the watermater issue by emailing : AgCEagleATcomcastDOTnet Replace the AT with and ampersand @ , and the dot with a . Regards, Gary

Ed wrote: "First, all of my voltage measurements were referenced to Pin 1 ground." Thanks for the clarifications. "Second, I noticed that my board does not have the C1 capacitor" That is

Hi Ian: Dessalator told me they had a new board about one year ago that included automatic fresh water flushing functionality. Is this the board you are referring to or do they have yet another new

Hi Patrick, Thanks for the info, I am glad I did not force the fuses out now. I now have the address for a US dealer, so I will contact them about what support is offered. Unfortunately my charger

Hi Richard, Thanks for the quick response. I am sure that the power supply coming into the boat is 220 and is getting to the 220 panel. All of our other 220 feeds ( AC etc are working ok ). The

Gary, I would like to purchase the special tool to extract the impeller. So please send me the email address to inquire about obtaining the tool. Thank you, BozoCinq@... <naegels@...>

Hi Gary, yous send me some years ago a special tool to extract impeller out of seawater pump on SM Yanmar engine. Some friends of me would like to have the same, but unfortunately, I lost your

Hi John, I had same problem on my 50 Amps Dolphyn charger, just after 18 month. I was not able to replace main fuses because they were "welded" on. Amel decided to replace charger under warranty. So

John, we have an 80 amp charger for Dolphin and got it here in FL see http://www.cruisair-southeast.com/ for information and service. It is really a REYA with a new name tag for the US> Please check

I have the 30 amp shore power charger fitted on the 2003 Amel SM. Yesterday it stopped producing a charge to the batteries. The 100 amp charger is still functioning correctly. The LED warning lights

<drdavegoodman@...> wrote: No, it is website probem, I am unable to search also.

Is there a problem with the website search function? I seem to have lost search capability. Might be a problem with my own computer settings? Thanks Dave

I had a faulty readout, it just counted up and then down continuously without even operating the anchor. I finaly replaced the electronic guts, inside the boat above the sink counter, as well as the

Hi Ed, The board came from Dessaltor after voicing my concerns to Amel about the inherent problems with the old board on a long voyage. I don't have a part number, but having had some correspondence