|
Re: Maramu replacement autopilot drive motor
Hi there
Our Maramu has a Raymarine type 2 with a hole cut into the door through which it protrudes.
It works well and looks ok
I find the noise of the autopilot rather tiresome though so use a
Hi there
Our Maramu has a Raymarine type 2 with a hole cut into the door through which it protrudes.
It works well and looks ok
I find the noise of the autopilot rather tiresome though so use a
|
By
smiles bernard
·
#50832
·
|
|
Re: A55: fresh water pump system : Beam IV on passage from Bonaire towards Santa Marta / Carthagena
Stuart,
I gave you all of my ideas. Like I said before I don't think the accumulator tank pressure has anything to do with a continuous running pump.
Best,
CW Bill Rouse
Amel Owners Yacht School
+1
Stuart,
I gave you all of my ideas. Like I said before I don't think the accumulator tank pressure has anything to do with a continuous running pump.
Best,
CW Bill Rouse
Amel Owners Yacht School
+1
|
By
CW Bill Rouse
·
#50831
·
|
|
Re: Headsets
#solution
I have a pair of ceecoach since 3 years and they work perfect for me.
Maybe you have a look
https://www.peiker-cee.de/en
Fair winds
Dieter
Fal-lera Sharki #135
Von:
I have a pair of ceecoach since 3 years and they work perfect for me.
Maybe you have a look
https://www.peiker-cee.de/en
Fair winds
Dieter
Fal-lera Sharki #135
Von:
|
By
INUS - BUSCH
·
#50830
·
|
|
Re: Carrying Tender on Davits while crossing
Hi M & A,
Their prices seem scary at first but if you divide by 2, you get about GBP pricing.
Cheers,
Jean-Pierre Germain
jp.germain45@...
Hi M & A,
Their prices seem scary at first but if you divide by 2, you get about GBP pricing.
Cheers,
Jean-Pierre Germain
jp.germain45@...
|
By
Germain Jean-Pierre
·
#50829
·
|
|
Re: Carrying Tender on Davits while crossing
Thank J.P. All info helps. I’ll look into the OC.
Happy Sailing;
Mohammad and Aty
B&B Kokomo
AMEL 54 #099
Thank J.P. All info helps. I’ll look into the OC.
Happy Sailing;
Mohammad and Aty
B&B Kokomo
AMEL 54 #099
|
By
Mohammad Shirloo
·
#50828
·
|
|
Re: Carrying Tender on Davits while crossing
Hello Mohammed & Any,
We’ve seen and rode in an OCT tender. A very sound dinghy with many desirable features sailors appreciate.
We did a long comparative ride in varying sea state conditions; both
Hello Mohammed & Any,
We’ve seen and rode in an OCT tender. A very sound dinghy with many desirable features sailors appreciate.
We did a long comparative ride in varying sea state conditions; both
|
By
Germain Jean-Pierre
·
#50827
·
|
|
Re: Carrying Tender on Davits while crossing
Hello Thomas;
Thanks for the info. Do you have Alex’s contact information? Do you know if he has the 310 or the 340?
Happy Sailing;
Mohammad and Aty
B&B Kokomo
AMEL 54 #099
Hello Thomas;
Thanks for the info. Do you have Alex’s contact information? Do you know if he has the 310 or the 340?
Happy Sailing;
Mohammad and Aty
B&B Kokomo
AMEL 54 #099
|
By
Mohammad Shirloo
·
#50826
·
|
|
Re: Converting my Amel 54 to lithium batteries: what I did, what I like and what I don't like (after one year of full time live aboard use)
Hi Colin.
Re the sale of Island Pearl. I am not surprised. I looked for any exuse not to sell Ocean Pearl. The reality is they are the most robust and easiest to sail boat available. (In my humble
Hi Colin.
Re the sale of Island Pearl. I am not surprised. I looked for any exuse not to sell Ocean Pearl. The reality is they are the most robust and easiest to sail boat available. (In my humble
|
By
Danny and Yvonne SIMMS
·
#50825
·
|
|
Re: Flowjet refrigeration pumps overhaul
What I didn’t make clear in previous text was that the 3x12.00$ pump relays effectively replaces the expensive and unreliable frigoboat pump controller. So a good, reliable and inexpensive option to
What I didn’t make clear in previous text was that the 3x12.00$ pump relays effectively replaces the expensive and unreliable frigoboat pump controller. So a good, reliable and inexpensive option to
|
By
Porter McRoberts
·
#50824
·
|
|
Re: Converting my Amel 54 to lithium batteries: what I did, what I like and what I don't like (after one year of full time live aboard use)
Hi Scott
Thanks again for the tips. The alternator will be my next step after some local testing yes. We are away from the boat down in Sydney for a week, but the Lithium install went perfectly on
Hi Scott
Thanks again for the tips. The alternator will be my next step after some local testing yes. We are away from the boat down in Sydney for a week, but the Lithium install went perfectly on
|
By
Colin - ex SV Island Pearl
·
#50823
·
|
|
Re: SM2000 - Have you replaced your dishwasher by a fridge/freezer?
#galley
This is great information and a good leg up
Thank you very much Paul, Danny and Bill
This is great information and a good leg up
Thank you very much Paul, Danny and Bill
|
By
Dominique Guenot
·
#50822
·
|
|
Re: A55: fresh water pump system : Beam IV on passage from Bonaire towards Santa Marta / Carthagena
Stuart.
Is the pressure good after pumping up the tank?
If so, it sounds to me like the next thing to check is the pressure switch. If it is adjusted incorrectly the pump will keep running as it is
Stuart.
Is the pressure good after pumping up the tank?
If so, it sounds to me like the next thing to check is the pressure switch. If it is adjusted incorrectly the pump will keep running as it is
|
By
Paul Stascavage
·
#50821
·
|
|
Re: Flowjet refrigeration pumps overhaul
Same experience. Worked for a short while making me happy & proud and then quitting on me.
Endless story.
Best Regards Teun
SV AMELIT A54 #128
Currently on the hard @ THE BOAT WORKS YARD
Same experience. Worked for a short while making me happy & proud and then quitting on me.
Endless story.
Best Regards Teun
SV AMELIT A54 #128
Currently on the hard @ THE BOAT WORKS YARD
|
By
Teun BAAS
·
#50820
·
|
|
Re: Headsets
#solution
Hi Kent,
I have 4 SENA units on board since 1 year; only used 2 or 3 of them. They work fine – no issues necessitating warranty claim.
Sure beats yelling from cockpit to stern or bow.
Best
Hi Kent,
I have 4 SENA units on board since 1 year; only used 2 or 3 of them. They work fine – no issues necessitating warranty claim.
Sure beats yelling from cockpit to stern or bow.
Best
|
By
Teun BAAS
·
#50819
·
|
|
Re: Rub Rail insert
Karen , Maud sent me a drawing of the cross section ,but just looked at it, and its too crude ,not to scale. Perhaps if you pulled up the end of yours a couple inches and take a photo. If someone had
Karen , Maud sent me a drawing of the cross section ,but just looked at it, and its too crude ,not to scale. Perhaps if you pulled up the end of yours a couple inches and take a photo. If someone had
|
By
Patrick McAneny
·
#50818
·
|
|
Re: Rub Rail insert
Hi Mark,
Pending pricing detail confirmation, we are very interested in the possibility of joining the rub rail order and shipment to the US East Coast!
Has anyone researched having a custom
Hi Mark,
Pending pricing detail confirmation, we are very interested in the possibility of joining the rub rail order and shipment to the US East Coast!
Has anyone researched having a custom
|
By
Karen Smith
·
#50817
·
|
|
Re: [Amel Yacht Owners] C Drive Photos
Hi Craig,
I'm currently attempting to remove and replace the bearings in the lower c drive however I'm having trouble getting the 'trumpet' off. I have the same c drive as you and have removed the
Hi Craig,
I'm currently attempting to remove and replace the bearings in the lower c drive however I'm having trouble getting the 'trumpet' off. I have the same c drive as you and have removed the
|
By
Mitchell Petersen
·
#50816
·
|
|
Re: Carrying Tender on Davits while crossing
Hi Aty and Mohammad,
I would recommend talking to Alex Ramseyer about his setup with an Highfield. It is long enough that he can fit it very securely under the Simpsons davits with the outboard on. I
Hi Aty and Mohammad,
I would recommend talking to Alex Ramseyer about his setup with an Highfield. It is long enough that he can fit it very securely under the Simpsons davits with the outboard on. I
|
By
Sv Garulfo
·
#50815
·
|
|
Re: Rub Rail insert
Hi Charles!
It will be approx 1.5 x 1.0 x 0.8 meter and the weight about 100kg.
My sister she is living in Charlotte, so I could ask her to pic up the stuff in your place. Our plan is, to sail up
Hi Charles!
It will be approx 1.5 x 1.0 x 0.8 meter and the weight about 100kg.
My sister she is living in Charlotte, so I could ask her to pic up the stuff in your place. Our plan is, to sail up
|
By
Stefan and Anne Deerberg
·
#50814
·
|
|
Re: Rub Rail insert
Charles, If you end up doing this shipment, I would like to add a stern bumper as well,probably could fit nicely between the inside of the rolled up inserts.
Thanks,
Pat
SM Shenanigans
Charles, If you end up doing this shipment, I would like to add a stern bumper as well,probably could fit nicely between the inside of the rolled up inserts.
Thanks,
Pat
SM Shenanigans
|
By
Patrick McAneny
·
#50813
·
|