Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Dessalator Technical

Nice to have a post about the Mango, especially number 1. If it's the same as ours, no. 28, the centre piece of wood is obviously a step, and the stainless tubing either side seems to tidy that up

We have recently acquired Mango hull no 1 and are in the process of a rebuild. Could anyone advise as to the function of the horizontal bar on the interior side of the forepeak

Gary, With reference to my e-mail of June 30th, I have changed the O-rings on the membrane nipples. Output was a bit less, so I guess I may have had some leakage there, but the output was still

Hi Joel You are absolutely right about the bread machine. I just got one that uses only 500W so my small 12V inverter can handle it. You are also right about using such a big inverter to run a TV,

7 July 2006 Mike: I am a little confused about where this blockage is. Is it in the pipe that comes out the bottom of the holding tank to the through hull? Is it in the hose that enters the top of

After losing our ability to pump out the toilet we discovered the copper intake tube at the bottom of the holding tank was 3/4 blocked by a hard crystaline substance deposited on the wall of the

I have painted, rewired, re-bearinged, and rerigged my main mast. This week I will try to get it back on. Does anyone know how may foot pounds the nut on top the mast needs for proper tension on the

Hello Ian and Judy, I am happy to hear that your D60 is working well. When I purchased my SM#266, the D60 had about 300 hours on it. What kind of service or maintanence it had recieved before I

http://www.apolloduck.com/display.phtml?aid=39623

Hi Tony, Are we the only ones with an effective D60? Our SM, 302, is 6 years old and we didnt use the W-M for the first 4 years. Now we have 1,300+ hours on it and it regularly delivers 45-60lph. The

Mike, Go to your Yahoo! profile and unsubscribe from the list. Or you can simply change to receive no email and that will allow you to remain as a member in case you want to read any postings on the

Hi Tony, Your problem is familiar, but I am not certain that I have a good answer. I had a D60 on my previous SM and suffered poor output too. I changed the membranes and it was good for a very

Hi, Could you please help me get removed from the amelyachtowners e-mail list. Thank you, Kim

Gary, I was wondering about the end caps as they are grey. Mine are white. The ones I ordered from Amel arrived today-2 days !!!. they were stopped by homeland security and returned to Memphis as

Hi Gary & John. I have now found out why my inline TDS meter continuously gives an 'Error' reading. It is not to do with the orientation of the probe at all. The problem is that the water maker

Hello Fellow Sailors, I am adding to the watermaker free for all. I have SM #266, and she has the D60 watermaker. I replaced the membranes last January and have about 220 hours on the system since

Eric: The Serto brand connectors are the gray plastic ones that Dessalator used throughout their system. I could not find a source for them in the USA. I forget the brand of the white connectors

Gary, i noticed in one of your photos you mentioned serto end caps. where did you ger them? thanks eric

29 June 2006 Hi Eric: RE: Your Question: "... why did you mount the omega quality sensor in a loop parallel to the water flow and not in series with the output water?' I only had "T" connectors at