After losing our ability to pump out the toilet we discovered the copper intake tube at the bottom of the holding tank was 3/4 blocked by a hard crystaline substance deposited on the wall of the

I have painted, rewired, re-bearinged, and rerigged my main mast. This week I will try to get it back on. Does anyone know how may foot pounds the nut on top the mast needs for proper tension on the

Hello Ian and Judy, I am happy to hear that your D60 is working well. When I purchased my SM#266, the D60 had about 300 hours on it. What kind of service or maintanence it had recieved before I

http://www.apolloduck.com/display.phtml?aid=39623

Hi Tony, Are we the only ones with an effective D60? Our SM, 302, is 6 years old and we didnt use the W-M for the first 4 years. Now we have 1,300+ hours on it and it regularly delivers 45-60lph. The

Mike, Go to your Yahoo! profile and unsubscribe from the list. Or you can simply change to receive no email and that will allow you to remain as a member in case you want to read any postings on the

Hi Tony, Your problem is familiar, but I am not certain that I have a good answer. I had a D60 on my previous SM and suffered poor output too. I changed the membranes and it was good for a very

Hi, Could you please help me get removed from the amelyachtowners e-mail list. Thank you, Kim

Gary, I was wondering about the end caps as they are grey. Mine are white. The ones I ordered from Amel arrived today-2 days !!!. they were stopped by homeland security and returned to Memphis as

Hi Gary & John. I have now found out why my inline TDS meter continuously gives an 'Error' reading. It is not to do with the orientation of the probe at all. The problem is that the water maker

Hello Fellow Sailors, I am adding to the watermaker free for all. I have SM #266, and she has the D60 watermaker. I replaced the membranes last January and have about 220 hours on the system since

Eric: The Serto brand connectors are the gray plastic ones that Dessalator used throughout their system. I could not find a source for them in the USA. I forget the brand of the white connectors

Gary, i noticed in one of your photos you mentioned serto end caps. where did you ger them? thanks eric

29 June 2006 Hi Eric: RE: Your Question: "... why did you mount the omega quality sensor in a loop parallel to the water flow and not in series with the output water?' I only had "T" connectors at

Dear all. I'm looking for an Amel Santorin to buy. Does any body knows of any in the market in Kroatia . I will be in the area in September. Please advise me. Thanks in advance

Is the Peter Pappas the same one who worked in Wilmington, N.C. and played football for Bear Bryant. Then moved to Birmingham to work at the University in I.D.?. Murray Seidel mseidel @ec.rr.com

Hello John, I hope you won't think I'm picking on you but the advice you gave is not correct. The Heart inverter charger is a nice piece of gear. It will also pull, in our opinion, too much out

Hello, If anyone is buying a new 54, I would sugest he have Amel install a European model of the Heart inverter/charger in addition to the standard 35 amp charger. I have one on my Amel and without

Gary, the watermaker membrane assembly is apart. Just a Sears rubber strap wrench on the end caps and it came apart in 10 minutes. ----thanks for all the help and pix. i ordered the membranes

Greetings everyone, O.K.! Alright already!! I can't believe how many of you have asked me to weigh in on the watermaker issue. I really don't want to become a defacto referee. Please