Mail is not accepted at your address please send me a correct address back channel. Thanks eric kimberlite at optonline.net Svensson sale. SM, across by us the yard. not subject=Unsubscribe>

Goran, My friend is looking for an amel. Please e-mail me the info at Kimberlite@.... Thanks Eric _____ From:

Roy, The winch is mounted to the boom. It does not come off with the shaft. Just remove the nut on the top of the arm which is attached to the shaft on top of the winch, and pound away with a

This subject has come up before. Go to the bottom of the page and type in faux teak and hit search to see all the postings. As an alternative get an estimate for covering with TEK-DEK which is a

We are in the process of purchasing a 1999 SM. The "fake teak" decking in the bow area show discoloration, spotty lightening of the color. How colorfast is this material and is there a color

This is an opportunity to obtain a very well maintained `as new' SM, very little used with low engine hours. It has only been sailed across the Atlantic directly after delivery in 2003 and after that

You may have seen the new Amel website www.amel.fr/pages-amel54.htm click on Amel 54 and watch the video.Ian & Judy Jenkins , Pen Azen, Piriapolis

hole in the regular the rust When you hit the bolt with the sledge hammer, which shaft came loose? the one holding the Andersen winch? It sounds as if instead of dropping the gearbox, you

Just to report that Amel have now put something on their web site www.amel.fr It includes a 5 minute 20 second video but forget that unless you are on broadband as the download would take forever on

Graham, I removed the shaft by placing a long steel bolt in the threaded hole in the bottom of the shaft and driving it up with a heavy sledge hammer. A regular hammer or mallet will not work. The

I have just had exactly the same and it resulted in the gear box packing up completely! Fortunately the manual over ride system in the SM works quite well. I tried to remove the gear box yesterday

Hi there, We have developed a loud noise when using the outhaul drive on the main boom. It is coming from the gearbox area, as it is there even when the rope is removed. I have tried

I fitted a new bumper to my SM in Jan this year and when it arrived from Amel I didn't think that the covering was the same as the old. In practice it has been absolutely fine but bear in mind the

Has anyone also had a bad experience with a relatively new stern bumper? I bought from the Amel yard in april 2004 a new bumper and within a few months the cover material showed some scars and

I have to replace the navigation lights (the external part with the green glass and the transparent glass for the rear one) and I would very much like to find replacement identical to the original

Hi Alain,...who answered me a long time ago, while I was at sea Thank you for your advice. I actually have done that…..not quite match with an AMEL boat!! But I find much more convenient and secure

Bill, West Marine carries both 25 and 10 watt navigation bulbs. 25 watt = 4810834; 10 watt = 4810826. They have toll free phone numbers for many countries but I don't know where you are. Their

[Has anyone discovered a clever way to set up and store a stern anchor? ] Please have a look at: http://i8.photobucket.com/albums/a5/POIRAUD/sternanchor.jpg Extract from "lessons from a

<yachtmaccabee@y...> wrote: and can be found at most chandlers, 25 watt for port,starboard and trilight and 10 watt for stern and anchor light. The big cabin lamp bulb is different and I have not

The bulbs used in the nav lights are the same as AQUASIGNAL bulbs and can be found at most chandlers, 25 watt for port,starboard and trilight and 10 watt for stern and anchor light. The big cabin