|
Change Of E-Mail Address
Just to let you know that I have had enough of CompuServe and all the spam
That is generated there. So from today, my g4ljf@... address will
Be closed and only
Just to let you know that I have had enough of CompuServe and all the spam
That is generated there. So from today, my g4ljf@... address will
Be closed and only
|
By
Ian Shepherd <ocean53@...>
·
#2357
·
|
|
Repowering
John, thanks for the information.
John, thanks for the information.
|
By
smneurolept <smneurolept@...>
·
#2356
·
|
|
THROUGH HULL FOR FISH FINDER
I am adding the fish finder to my nav net system and need to have and
additional through hull placed for the sounder does anyone have a
suggestion for the best placement of this through hull. Thank
I am adding the fish finder to my nav net system and need to have and
additional through hull placed for the sounder does anyone have a
suggestion for the best placement of this through hull. Thank
|
By
pjppappas <pjppappas@...>
·
#2355
·
|
|
Re: [Amel Yacht Owners] OIL LEAKING FROM JIB DRIVE
thank you joel. that is as relief. did you get the photos for the bow anchor? tell vela hi for me. Peter
"Joel F. Potter" <jfpottercys@...> wrote: Hi Peter,
I can promise you, with
thank you joel. that is as relief. did you get the photos for the bow anchor? tell vela hi for me. Peter
"Joel F. Potter" <jfpottercys@...> wrote: Hi Peter,
I can promise you, with
|
By
peter pappas <pjppappas@...>
·
#2354
·
|
|
Re: [Amel Yacht Owners] Looking for a Super Maramu 2000; available Spring 2007
Hello,
We would be interested in getting more information regarding your SM 2001.
Thanks,
Tom Keesling
Raleigh, NC
919-345-2758
Hello,
We would be interested in getting more information regarding your SM 2001.
Thanks,
Tom Keesling
Raleigh, NC
919-345-2758
|
By
Tom K <tantalus5@...>
·
#2353
·
|
|
Re: [Amel Yacht Owners] Repowering Super Maramu
Thomas, Trans Atlantic Diesel in Virginia has a large selection of used and new parts for the Perkins. Give them a call at 804-6429296 John ' Moon
Thomas, Trans Atlantic Diesel in Virginia has a large selection of used and new parts for the Perkins. Give them a call at 804-6429296 John ' Moon
|
By
john martin <symoondog@...>
·
#2352
·
|
|
Re: [Amel Yacht Owners] OIL LEAKING FROM JIB DRIVE
Hi Peter,
I can promise you, with 99% certainty, that your headsail
furler gearbox is not leaking. The seal is on the top of
the casting and seldom fail.
When a new AMEL is rigged for the first
Hi Peter,
I can promise you, with 99% certainty, that your headsail
furler gearbox is not leaking. The seal is on the top of
the casting and seldom fail.
When a new AMEL is rigged for the first
|
By
amelforme
·
#2351
·
|
|
Re: [Amel Yacht Owners] Looking for a Super Maramu 2000; available Spring 2007
Hello Charlie and Ruth,
So you are stepping ashore!
I have eventually sold my own SM last week and she is on her way to Sweden
where her new owner lives. The second hand market hasn't been too
Hello Charlie and Ruth,
So you are stepping ashore!
I have eventually sold my own SM last week and she is on her way to Sweden
where her new owner lives. The second hand market hasn't been too
|
By
jboucharla@...
·
#2350
·
|
|
OIL LEAKING FROM JIB DRIVE
CALLISTO 2000sm #369 has developed an oil leak coming form the drive
of the jib. the oil is leaking right out the bottom around the shaft
that leads to the deck turn buckel. Is there a way to check
CALLISTO 2000sm #369 has developed an oil leak coming form the drive
of the jib. the oil is leaking right out the bottom around the shaft
that leads to the deck turn buckel. Is there a way to check
|
By
pjppappas <pjppappas@...>
·
#2349
·
|
|
Looking for a Super Maramu 2000; available Spring 2007
Hello,
I am looking for a SM2000 which will be available some time about Spring next year - 2007.
We have previously owned a Fango; No 24 and a Santorin Sloop; No 54. So next year we are
looking
Hello,
I am looking for a SM2000 which will be available some time about Spring next year - 2007.
We have previously owned a Fango; No 24 and a Santorin Sloop; No 54. So next year we are
looking
|
By
amelfango
·
#2347
·
|
|
Re: [Amel Yacht Owners] Looking for a Super Maramu 2000; available Spring 2007
Rob,
We are original owners of a fully optioned and carefully maintained July
2001 Super Maramu 2000, our second AMEL. We owned a Maramu for 16 years before
upgrading.
We have not put our boat
Rob,
We are original owners of a fully optioned and carefully maintained July
2001 Super Maramu 2000, our second AMEL. We owned a Maramu for 16 years before
upgrading.
We have not put our boat
|
By
svmalaika@...
·
#2348
·
|
|
Awnings and watercatchers
As we are in the Med and it hardly ever rains we have made up sunscreens using cheap polythene garden netting as used in nurseries to keeep the sun off the plants. It is easily made up and rolls up to
As we are in the Med and it hardly ever rains we have made up sunscreens using cheap polythene garden netting as used in nurseries to keeep the sun off the plants. It is easily made up and rolls up to
|
By
Anne and John Hollamby <hollamby@...>
·
#2345
·
|
|
Heads,sheets and gangplank suspenders
The build up in the plumbing is common in urinals and in the Uk plumbers use hydrochloric acid which is known as muriatic acid in the US, to disolve it Poisionous fumes are released and can damage
The build up in the plumbing is common in urinals and in the Uk plumbers use hydrochloric acid which is known as muriatic acid in the US, to disolve it Poisionous fumes are released and can damage
|
By
Anne and John Hollamby <hollamby@...>
·
#2346
·
|
|
Maramu to lend
Hello
I am the owner of a 1983 Maramu. I am looking for someone to sail my
boat from Turkey to Thailand. Anyone interested?
Hello
I am the owner of a 1983 Maramu. I am looking for someone to sail my
boat from Turkey to Thailand. Anyone interested?
|
By
cptcc2001 <cptcc2001@...>
·
#2344
·
|
|
Re: [Amel Yacht Owners] Repowering Super Maramu
Hi Thomas,
We just took out our Perkins Prima T80 engine and re-powered our Super
Maramu to the 100 HP Yanmar.
If you are interested I have the old engine and all kinds of other parts for
that. I
Hi Thomas,
We just took out our Perkins Prima T80 engine and re-powered our Super
Maramu to the 100 HP Yanmar.
If you are interested I have the old engine and all kinds of other parts for
that. I
|
By
Udo J. Reich <udo@...>
·
#2343
·
|
|
FRUNO NAVNET DATA TRANSFER
My 2002 SM 2000 #369 "CALLISTO" has enstalled the Furuno/Navionics
Navnet chart plotter / radar. I am trying to transfere waypoints and
routes form the host plotter that sits at the nav station to
My 2002 SM 2000 #369 "CALLISTO" has enstalled the Furuno/Navionics
Navnet chart plotter / radar. I am trying to transfere waypoints and
routes form the host plotter that sits at the nav station to
|
By
pjppappas <pjppappas@...>
·
#2342
·
|
|
Repowering Super Maramu
Hello,
I have a 1992 Super Maramu in Ft. Lauderdale and need to replace
the manifold and oil cooler. It appears so far that the only source
of parts for the engine, Perkins Prima 80T, are from UK.
Hello,
I have a 1992 Super Maramu in Ft. Lauderdale and need to replace
the manifold and oil cooler. It appears so far that the only source
of parts for the engine, Perkins Prima 80T, are from UK.
|
By
smneurolept <smneurolept@...>
·
#2341
·
|
|
Re: [Amel Yacht Owners] Width of keel shoe Santorin
Hi Georges,
Thanks for or quick response. Yesterday I have got from Mr Olivier Beaute from the Amel Yard in La Rochelle the exact dimension of the width of the Santorin keel shoe: 86 cm.
That means
Hi Georges,
Thanks for or quick response. Yesterday I have got from Mr Olivier Beaute from the Amel Yard in La Rochelle the exact dimension of the width of the Santorin keel shoe: 86 cm.
That means
|
By
Willem J. Kroes <willem.j.kroes@...>
·
#2340
·
|
|
Re: [Amel Yacht Owners] Width of keel shoe Santorin
My santorin is on land in Greece (Leros), but I am presently in the US.
By memory it is very close to 1meter (3' 3").
Regards
Georges Pellegrini 96 Santorin #132
My santorin is on land in Greece (Leros), but I am presently in the US.
By memory it is very close to 1meter (3' 3").
Regards
Georges Pellegrini 96 Santorin #132
|
By
georges pellegrini <dji314@...>
·
#2339
·
|
|
Propane conversion
has anyone posted or at least taken pictures of their propane
conversion? I am in the process of doing it, and would be interested
in seeing what another SM conversion looks like, especially
has anyone posted or at least taken pictures of their propane
conversion? I am in the process of doing it, and would be interested
in seeing what another SM conversion looks like, especially
|
By
itacknjibe
·
#2338
·
|