Hello John, Congratulations on getting a 54.I should be happy to hear your views on the plusses and minuses over your 53, my address is annejohnat melita.net. As you keep your boat in the south of

Hi, I do agree that the comments and messages regarding the watermaker have become overpowering but before the the subject is closed, could I ask for a little help. In April I took delivery of my

Hi all, I agree with the mail of Eric Mejean I am owner of Amel boats from 15 years ( one Maramu 3 years, a first SM N 51 during 11 years and now a second SM N 426 ) I can say that i had not mayor

In a message dated 25/06/2006 12:11:53 GMT Daylight Time, j.c.mcdougall@... writes: am therefore ignorant of the recommended procedures for maintaining the watermaker and the manual is

In a message dated 25/06/2006 08:22:01 GMT Daylight Time, roger.banks@... writes: I'll speak up in support of Erick Mejean as I have been wondering for some time how to say politely that

Totally cant agree with the line of this post - not having any axe to grind her at all being a totally impartial observer - it would appear to me that the watermaker does not do what it says - or is

I'll speak up in support of Erick Mejean as I have been wondering for some time how to say politely that the site postings have become way my largest source of email and pretty boring on the topic of

Dear All I have been following this forum for many years. I found most of the topics discussed very interesting as at the end, through the discussions, we got to know our boat better. (I take this

Gary, Thanks for the reference- Oddly enough, I had purchased an r/o unit for my house from them on eBay a year ago. Much easier than lugging bottled water. Works great. Just in case, I

Eric: See message # 2290, The vendor for the membranes is in Ft. Lauderdale, Florida, USA Gary--- In amelyachtowners@..., eric <kimberlite@...> wrote:

Hi Gary, Thanks for the clarification. I could not find the post that stated where you purchased your new membranes. Could you give me the name and contact info? Thanks Eric Amel Super Maramu

23 June 2006 Dear Yves: Thank you for more details on your system and on the type of near fire that you suffered. Your description has led me to do some additional research on my watermaker. Does

Eric: The first posting was of my actual measurements of the old O-rings as removed. I measured these with a digital micrometer. I then took the used O-rings to HydraPak and asked them for matching

Hi, Please remove our e-mail: hallelujah_mk@... from your group e-mail list. Thank you Kim

Hi Ian and judy I enjoyed reading your message on drinking water produced on board. I have my “ judy ” on board, her name is Marie-Christine, but I never had the idea of making a blind

Hi Ian, I am very glad with your last post on this forum. As to the letter to send to J.J. Lemonnier, I am about to write it. Did you send it as registered mail? I quite agree that this

Dear Gary Sorry for answering late, but I am not so often near an internet I confirm that I nearly had fire in my boat due to Dessalator 220 V. motor by end 2005. My equipment is a Duo 220 V. / 24

Gary, You made 2 postings of the "o" ring measurements which measurements are correct? Is there a problem with using silicone on the "o" rings in the same area as the membranes? Thanks Fair

Could anyone advise as to the number and size, (expressed as a percent of J), of the jibs on the 54? Best Regards, Anne and John Annie M

21 Jun 2006 Eric: I purchased my 0-rings from a local vendor here in Salt Lake City, Utah, USA, called Hydra Pak 1-801-973-7325 . Any local supplier of O-rings should have these O-rings since they