|
Re: Spade 180 on a 54
Haldun could you comment about how the spade does in tougher anchoring situations? Poor bottom, deep, ect
thanks
Courtney
Trippin
54 #101
Haldun could you comment about how the spade does in tougher anchoring situations? Poor bottom, deep, ect
thanks
Courtney
Trippin
54 #101
|
By
Courtney Gorman
·
#50741
·
|
|
Re: SM2000 - Have you replaced your dishwasher by a fridge/freezer?
#galley
Guillaume,
Eric SM Kimberlite also did this and posted some photos: Search under photos for "dishwasher"
Here are a few photos:
Guillaume,
Eric SM Kimberlite also did this and posted some photos: Search under photos for "dishwasher"
Here are a few photos:
|
By
CW Bill Rouse
·
#50740
·
|
|
Re: Spade 180 on a 54
Peter,
It is the 55kg Spade on the picture, it fits perfectly when snug. Wasi is demoted as the second anchor. Sorry, i'm away and i can not attach any photos now. Windlass is strong enough to handle
Peter,
It is the 55kg Spade on the picture, it fits perfectly when snug. Wasi is demoted as the second anchor. Sorry, i'm away and i can not attach any photos now. Windlass is strong enough to handle
|
By
Halidun Karagoz
·
#50739
·
|
|
Re: SM2000 - Have you replaced your dishwasher by a fridge/freezer?
#galley
Dear Paul, this is something I have been thinking of doing... Would you have any schematics / pictures / list of items you could share? Many thanks,
Guillaume
Carpathia III - SM2K #293
Malta
Dear Paul, this is something I have been thinking of doing... Would you have any schematics / pictures / list of items you could share? Many thanks,
Guillaume
Carpathia III - SM2K #293
Malta
|
By
Cathy & Guillaume
·
#50738
·
|
|
Re: Rub Rail insert
Pat,
I saw the rub rail "rubbery" insert like your vintage SM... when it arrived from France for another boat, it was coiled in a circle of about 2' diameter
Pat,
I saw the rub rail "rubbery" insert like your vintage SM... when it arrived from France for another boat, it was coiled in a circle of about 2' diameter
|
By
CW Bill Rouse
·
#50737
·
|
|
Re: A55: fresh water pump system
IMPORTANT- Read this first
You earlier said that the "fresh water pump runs continuously unless turned off." It may be running because it is not achieving the correct pressure, adjusting the pressure
IMPORTANT- Read this first
You earlier said that the "fresh water pump runs continuously unless turned off." It may be running because it is not achieving the correct pressure, adjusting the pressure
|
By
CW Bill Rouse
·
#50736
·
|
|
Re: A55: fresh water pump system
Yes, the lack of flow is caused by a lack of sufficient pressure. In my experience, the lack of pressure can be caused by:
An open tap
No
A break in the freshwater circuit
No
A defective solenoid
Yes, the lack of flow is caused by a lack of sufficient pressure. In my experience, the lack of pressure can be caused by:
An open tap
No
A break in the freshwater circuit
No
A defective solenoid
|
By
Stuart Hemingway <stuart@...>
·
#50735
·
|
|
Re: Size of main anchor for Super Maramu
Paul, I just watched some video of a Rocna testing, resetting after a 180 shift,which did show a problem resetting until the boat slowed to one kt. ,They only had a 3:1 scope , I probably never have
Paul, I just watched some video of a Rocna testing, resetting after a 180 shift,which did show a problem resetting until the boat slowed to one kt. ,They only had a 3:1 scope , I probably never have
|
By
Patrick McAneny
·
#50734
·
|
|
Re: Buying a Sharki
Tnx
pon, 24. velj 2020. 12:45 marklesparkle59 <marklesparkle59@...> je napisao:
Tnx
pon, 24. velj 2020. 12:45 marklesparkle59 <marklesparkle59@...> je napisao:
|
By
Ivica Curlica <ivica.curlica@...>
·
#50733
·
|
|
Re: Spade 180 on a 54
Hi Haldun
Thanks for a quick answer. Sorry i misspelled your name.
Some questions which you hopefully could easily answer:
Do you think its the 55kg which is on the picture?
Did you have a second
Hi Haldun
Thanks for a quick answer. Sorry i misspelled your name.
Some questions which you hopefully could easily answer:
Do you think its the 55kg which is on the picture?
Did you have a second
|
By
Peter Tiner
·
#50732
·
|
|
Re: Spade 180 on a 54
Hi Peter,
Yes i have a 55kg Spade, and i am very happy with it.
Cheers,
Haldun
sv Amanin A54#164
Gokova
-------- Orijinal mesaj --------
Kimden: Peter Tiner <peter.tiner@...>
Tarih: 24.02.2020 15:52
Hi Peter,
Yes i have a 55kg Spade, and i am very happy with it.
Cheers,
Haldun
sv Amanin A54#164
Gokova
-------- Orijinal mesaj --------
Kimden: Peter Tiner <peter.tiner@...>
Tarih: 24.02.2020 15:52
|
By
Halidun Karagoz
·
#50731
·
|
|
Rub Rail insert
I contacted Maud about buying a new rub rail insert ,she cannot provide an estimate for shipping. We are thinking it may be much more than we first estimated. Has anyone had the inserts shipped to the
I contacted Maud about buying a new rub rail insert ,she cannot provide an estimate for shipping. We are thinking it may be much more than we first estimated. Has anyone had the inserts shipped to the
|
By
Patrick McAneny
·
#50730
·
|
|
Spade 180 on a 54
Hi all Amelians
I have a Wasi Bugel 42Kg fitted to my 54 and i´m going to switch to i think a 44Kg Spade. Yes, i know it´s big but i´m into "when your neighbors starts laughing , then it´s big
Hi all Amelians
I have a Wasi Bugel 42Kg fitted to my 54 and i´m going to switch to i think a 44Kg Spade. Yes, i know it´s big but i´m into "when your neighbors starts laughing , then it´s big
|
By
Peter Tiner
·
#50729
·
|
|
Re: Buying a Sharki
Three problems I am addressing on Sharki#96 right now are the headlinings and the bulkhead in the aft cabin. The 9mm bulkhead rots because water gets in between the plywood and the fibreglass of the
Three problems I am addressing on Sharki#96 right now are the headlinings and the bulkhead in the aft cabin. The 9mm bulkhead rots because water gets in between the plywood and the fibreglass of the
|
By
marklesparkle59
·
#50728
·
|
|
Re: Buying a Sharki
Once you have a good once over for general condition (pay attention to how it is kept) be sure to focus on drive shaft thru- hulls mast and rig.
Mine looked great and I knew what I needed to
Once you have a good once over for general condition (pay attention to how it is kept) be sure to focus on drive shaft thru- hulls mast and rig.
Mine looked great and I knew what I needed to
|
By
Aras Grinius
·
#50727
·
|
|
Buying a Sharki
In mid march i will go with mine mechanic in Lefkas, Greece to look at Sharki any tips on what to look for on the boat as special problems on Sharki.
In mid march i will go with mine mechanic in Lefkas, Greece to look at Sharki any tips on what to look for on the boat as special problems on Sharki.
|
By
Ivica Curlica <ivica.curlica@...>
·
#50726
·
|
|
Re: SM2000 - Have you replaced your dishwasher by a fridge/freezer?
#galley
We ”replaced” our dishwasher, I built a freezer using polystyrene panels 10 cm in the sides, 15 cm in the bottom, in the top we used 13 cm. Total volume about 40 liters. As liner we used a ca 1 mm
We ”replaced” our dishwasher, I built a freezer using polystyrene panels 10 cm in the sides, 15 cm in the bottom, in the top we used 13 cm. Total volume about 40 liters. As liner we used a ca 1 mm
|
By
Paul Osterberg
·
#50725
·
|
|
SM2000 - Have you replaced your dishwasher by a fridge/freezer?
#galley
We are not using our dishwasher which is just taking space.
Have you replaced your dishwasher by a fridge/freezer? or something else?
Any experience greatly appreciated
Thanks
Dominique Guenot
We are not using our dishwasher which is just taking space.
Have you replaced your dishwasher by a fridge/freezer? or something else?
Any experience greatly appreciated
Thanks
Dominique Guenot
|
By
Dominique Guenot
·
#50724
·
|
|
Re: Beam IV : A55 ; Bonaire , [AmelYachtOwners] A55: fresh water pump system
The air pressure to the accumulator tank should be about 10-15% less than the pump cutoff pressure as noted on the pressure gauge of the water pump.
The air pressure to the accumulator tank should be about 10-15% less than the pump cutoff pressure as noted on the pressure gauge of the water pump.
|
By
CW Bill Rouse
·
#50723
·
|
|
Beam IV : A55 ; Bonaire , [AmelYachtOwners] A55: fresh water pump system
Thank you Paul ,
I ‘l follow that protocol , thank you .
Bill’’s suggestion is really useful I’l follow up on that & report back.
Good too to have the further suggestion which we’ll keep in
Thank you Paul ,
I ‘l follow that protocol , thank you .
Bill’’s suggestion is really useful I’l follow up on that & report back.
Good too to have the further suggestion which we’ll keep in
|
By
Stuart Hemingway <stuart@...>
·
#50722
·
|