Glad to be able to help, Eamonn. Did you have to cut away any of the pipe? If so your float meter won’t read correctly without compensating. Kent S/V Kristy SM 243 Hi Kent thanks for bringing

Hello again, Be aware that if you try my (Last Option) , and you still have oil left in your bow thruster it is going to leak all over the place when you remove the backing plate. Be aware and

Hello, This video shows my rebuild of the bow thruster. If you can't get the lower unit to disengage using all the tricks from other Amel Owners, you can do this for a last resort..... Here is a link

Hi Bill, Thanks for your efforts. A54 #164, Amanin, 2015, Haldun Karagoz Stay safe. Cheers Haldun -------- Orijinal mesaj -------- Kimden: scentstone <scentstone@...> Tarih: 06.04.2020 08:14

Garhauer’s customer service has been continuously excellent over many years. ~~~⛵️~~~Matt

Hi Oliver At 6Ft 4, I am 1.94m not as tall as you, but even so, still found all Amel bunks just marginally too short (at 2.0m in length each) for good night sleep. Our solution was to convert the rear

Hi Bill, Thank you again for your efforts for the community. As you know ScentStone has completed her first RTW in August : "SM2K #375 ScentStone 2019 Fred" F.

I have used Garhauer blocks, vangs, and other products on my boats for over 25 years. They are bulletproof, extremely well made, extraordinarily strong and have a 10 year unconditional guarantee. In

Hi Kent thanks for bringing me a selection of dowels! (Kent’s boat Kristy is anchored beside me.) The pipe walls are 1mm thick, the inside diameter is 12mm so a 10mm dowel is perfect for the job.

Hi Oliver, Where are you located? Fair Winds Eric Amel Super Maramu #376

Hallo JP Can you sent me the Address, I am in New Zealand in Whangarei in the moment. Thank You Heinz, SM 2000, 292 heinz@... Von: main@AmelYachtOwners.groups.io

I used the carlingtech mechanichydraulic disruptor to replace the one of the watermaker in the engineroom and it worked very good. Wolfgang Weber SY Elise Amel 54 #162

Dear Oliver, the the actual headroom on our boat (AMEL 54): in the galley - 2,00 to 2,05m the salon - appr. 2,05m in the passage way (16cm step up left and right - the chairs, table etc.) the aft

Hi Karen, Sorry for the late reply, Check out https://www.carlingtech.com/thermal-cb-clb-series ; this is not a direct replacement, no manual trip, but it is a disruptor style circuit breaker.

I don't think you are an idiot, but I KNOW YOU ARE VERY FUNNY!😀

Oooo, Doug reminded me of something (you might like this too, doug).... Our SM aft cabin was modified brilliantly into a wall-to-wall bed. It has some custom foam inserts around the four sides about

Oliver, I am 6’6”, so I guess that equals about 1,95m. And I was equally concerned about this. The areas you mention are not a concern. The boom is not really a factor in the cockpit on the

Could you insert and glue a dowel into the broken ends? Kent SM 243 Kristy Hi I bent the water level dipstick with 900 liters in the tank, so near the bottom of the dipstick. (I was running the

I figured I was an idiot, and it turns out I was correct :)

Hey Oliver! Good call on looking at Amels, for hundreds of reasons. Headroom is defo one of them... I just measured for ya, our SM has 208 cm in the galley and saloon, and 200 cm in the head and