Hello, I have a 1992 Super Maramu in Ft. Lauderdale and need to replace the manifold and oil cooler. It appears so far that the only source of parts for the engine, Perkins Prima 80T, are from UK.

Hi Georges, Thanks for or quick response. Yesterday I have got from Mr Olivier Beaute from the Amel Yard in La Rochelle the exact dimension of the width of the Santorin keel shoe: 86 cm. That means

My santorin is on land in Greece (Leros), but I am presently in the US. By memory it is very close to 1meter (3' 3"). Regards Georges Pellegrini 96 Santorin #132

has anyone posted or at least taken pictures of their propane conversion? I am in the process of doing it, and would be interested in seeing what another SM conversion looks like, especially

Hello fellow Santorin owners, My boat is in the water in Greece and I am engaged in een e-mail discussion with a boat Yard here in Corfu. They asked me the exact width of the wingkeel at the bottom

Hi Gary, I use PB Blaster (Blaster) on boats that are on the hard. I stuff a rag into the thru hull fitting from the outside to protect the bottom paint and spray the Blaster into the top of the

I have a burgee that must be flown from the top of the main mast. What have any members done to rig this? Fair Winds, Eric Amel Super Maramu #376 Kimberlite

Hi Steve: Regarding your use of the PB Blaster product, I looked on the PB Blaster web site to see what was in their PB Blaster Penetrating Fluid. While I have used vinegar to good effect I am

Mike, The buildup is caused by urine and not seawater. Very complete flushing and occasional use of vinegar will reduce buildup. The penetrating fluid "PB Blaster" will help free stiff thru hull

After about a year i noticed a smell when i passed the forward head. i eventually tracked it down to the plastic pipe that connects to the copper pipe. The hose was filled with those crystals and

I had the same exact problem at the same exact location on my santorin. The tank is original from amel. the only difference is that the copper tube on my boat is connected to the ground, but it did

As mentioned before, we experienced significant buildup of deposits on the copper tube walls where the head pump hose feeds the holding tank. Thickness on the main head was over 1/4" and the

Mike, To eliminate future problems with buildup of the hard crystal in the line,hang the shower nozzel on the curtain hanger next to the toilet. When you flush(,the right toggle only on the black

We are only the third owners of this Mango. It is in excellent condition. Give us a call for the full scoop. Henry 858 967-6104

I have just sold my supermaramu 2000 and am hoping to replace her with either a well looked after Sharki or Santorin. If anyone has any details of any for sale I would appreciate information.

Gary, I installed the new membranes and end caps. Everything works well. I get an 87-95 micro siemens when the unit is running. I plumbed it as you did. I think I am going to use a chase nipple and

Thanks to those whom responded to my request for information. Peter Pappas 'CALLISTO' #369

We had requested that Shade Tree duplicate the order that they had produced for Ed Steele, SM2 #331. The 3 awnings that we received are each slightly off in measurements and do not fit our

Peter, We bought awnings from Shadetree (see www.intheshd.com) for our Super Maramu #331. We bought three sections to cover the foredeck, main cabin and mizzen deck although we do not use the

Peter, We bought awnings from Shadetree (see www.intheshd.com) for our Super Maramu #331. We bought three sections to cover the foredeck, main cabin and mizzen deck, although we do not use the