|
Re: [Amel Yacht Owners] vent on newer model sm
I can't answer your question but if they are fitted they should go though the upper part of the hull near the tank and will probably have a metal shield covering the outlet.
Robin
eric
I can't answer your question but if they are fitted they should go though the upper part of the hull near the tank and will probably have a metal shield covering the outlet.
Robin
eric
|
By
Robin Cooter <robincooter@...>
·
#1934
·
|
|
vent on newer model sm
Hi,
I have hull #376.
I was wondering where the vents for the holding tanks are located.
Fair Winds,
Eric
Amel Super Maramu #376 Kimberlite
Hi,
I have hull #376.
I was wondering where the vents for the holding tanks are located.
Fair Winds,
Eric
Amel Super Maramu #376 Kimberlite
|
By
eric freedman
·
#1933
·
|
|
Re: [Amel Yacht Owners] Holding Tanks in Amel Santorin
The structural integrity is a valid point. When AMEL retro fit their tank to a Santorin they only use the after top section of the heads lockers (for’d), and do not remove the centre partition as
The structural integrity is a valid point. When AMEL retro fit their tank to a Santorin they only use the after top section of the heads lockers (for’d), and do not remove the centre partition as
|
By
Robin Cooter <robincooter@...>
·
#1932
·
|
|
Re: [Amel Yacht Owners] Holding Tanks in Amel Santorin
Ken -
A prior owner of our boat, "Sangaris" (Hull#68-1992), did an
installation similar to Robin's except the full wall panel was
removed so that after the tank was installed on the middle shelf
Ken -
A prior owner of our boat, "Sangaris" (Hull#68-1992), did an
installation similar to Robin's except the full wall panel was
removed so that after the tank was installed on the middle shelf
|
By
Craig Briggs
·
#1931
·
|
|
Autopilot brushes
Hello Robin,
I do not know how old your Santorin is but I do know that the linear
drive that I bought about 14 or 15 years ago was made by a British
company called Klaxon in Luton (I guess they used
Hello Robin,
I do not know how old your Santorin is but I do know that the linear
drive that I bought about 14 or 15 years ago was made by a British
company called Klaxon in Luton (I guess they used
|
By
John and Anne on Bali Hai <hollamby@...>
·
#1930
·
|
|
Re: [Amel Yacht Owners] auto pilot brushes
Would be very appreciative if you could let me have name and/or address, phone number and E-mail of the firm you got the brushes from
caramel02uk <pjn.mccallin@...> wrote: whilst in
Would be very appreciative if you could let me have name and/or address, phone number and E-mail of the firm you got the brushes from
caramel02uk <pjn.mccallin@...> wrote: whilst in
|
By
Robin Cooter <robincooter@...>
·
#1929
·
|
|
Re: [Amel Yacht Owners] Holding Tanks in Amel Santorin
When we purchased our boat (Santorin 004) we knew that we would have to fit holding tanks as we were going to the U.S. A friend had one tank fitted to his Santorin by AMEL and I worked out that I
When we purchased our boat (Santorin 004) we knew that we would have to fit holding tanks as we were going to the U.S. A friend had one tank fitted to his Santorin by AMEL and I worked out that I
|
By
Robin Cooter <robincooter@...>
·
#1928
·
|
|
Re: [Amel Yacht Owners] Holding Tanks in Amel Santorin
On my 96 Santorin this has been done by Amel for the forward head.
The tank is fitted behind the panel, just below deck and forward of the
separation where the little cabinet is (the one with mirror
On my 96 Santorin this has been done by Amel for the forward head.
The tank is fitted behind the panel, just below deck and forward of the
separation where the little cabinet is (the one with mirror
|
By
georges pellegrini <dji314@...>
·
#1927
·
|
|
Holding Tanks in Amel Santorin
We want to install holding tanks in our 1998 Santorin, Amel inform us
that the tanks fitted to the SM will not fit the Santorin, and that we
have to have them specially made.
Has anyone had this
We want to install holding tanks in our 1998 Santorin, Amel inform us
that the tanks fitted to the SM will not fit the Santorin, and that we
have to have them specially made.
Has anyone had this
|
By
oceanhobo1 <ken@...>
·
#1926
·
|
|
Need informationes - Battery compartment
I need to order baterries for my 1995 SM, but I am not physically at the boat.
I need to know if anyone knows the standard size of the battery compartment
on the SM. If anyone has those dimensions,
I need to order baterries for my 1995 SM, but I am not physically at the boat.
I need to know if anyone knows the standard size of the battery compartment
on the SM. If anyone has those dimensions,
|
By
PFM53 <pfm53@...>
·
#1925
·
|
|
Re: [Amel Yacht Owners] Painting deck stripes - pictures
<mgrunstein2002@...> wrote:
Thanks for the compliment. The best description of the process
was posted by Ann Harsh of Harmonie on Sept 6 2003, under subject:
Deck Grooves. Do a search on this
<mgrunstein2002@...> wrote:
Thanks for the compliment. The best description of the process
was posted by Ann Harsh of Harmonie on Sept 6 2003, under subject:
Deck Grooves. Do a search on this
|
By
rbenven44 <no_reply@...>
·
#1924
·
|
|
Re: [Amel Yacht Owners] Painting deck stripes - pictures
Hi Roy,
I am impressed with your painting job!
Did you use masking tape? and what do you mean by
"one-part Polyurethane"?
I am definitely going to do the same as the fading
paint is an
Hi Roy,
I am impressed with your painting job!
Did you use masking tape? and what do you mean by
"one-part Polyurethane"?
I am definitely going to do the same as the fading
paint is an
|
By
michael grunstein <mgrunstein2002@...>
·
#1923
·
|
|
Re: [Amel Yacht Owners] Half Hull Model of Super Maramu
AMEL produce half models for the Santorin so I would be fairly sure they produce one for the Super Maramu. Might be worth asking them for a price.
Robin Cooter
closereach
AMEL produce half models for the Santorin so I would be fairly sure they produce one for the Super Maramu. Might be worth asking them for a price.
Robin Cooter
closereach
|
By
Robin Cooter <robincooter@...>
·
#1921
·
|
|
Half Hull Model of Super Maramu
We're thinking of having a half hull model built to mount on the main
bulkhead in the saloon. Here's what we've found out:
A traditional half hull model from www.halfhulls.com is US$445 plus
S&H.
We're thinking of having a half hull model built to mount on the main
bulkhead in the saloon. Here's what we've found out:
A traditional half hull model from www.halfhulls.com is US$445 plus
S&H.
|
By
Zanareva
·
#1920
·
|
|
Re: [Amel Yacht Owners] Half Hull Model of Super Maramu
In a message dated 01/02/2006 14:06:48 GMT Standard Time,
closereach@... writes:
A traditional half hull model from www.halfhulls.com is US$445 plus
S&H. Halfhull is 18" (45 cm) long
In a message dated 01/02/2006 14:06:48 GMT Standard Time,
closereach@... writes:
A traditional half hull model from www.halfhulls.com is US$445 plus
S&H. Halfhull is 18" (45 cm) long
|
By
dlm48@...
·
#1922
·
|
|
Re: [Amel Yacht Owners] Amel contact info question
Since Yahoo strips out the email addresses in these posts, would you
please send Olivier Beaute's email address to me at:
judyrouse "at" houston.rr.com
Thanks,
Judy
<ocean53@s...> wrote:
Beaute
Since Yahoo strips out the email addresses in these posts, would you
please send Olivier Beaute's email address to me at:
judyrouse "at" houston.rr.com
Thanks,
Judy
<ocean53@s...> wrote:
Beaute
|
By
jrjrjrouse2000 <judyrouse@...>
·
#1919
·
|
|
Re: [Amel Yacht Owners] Amel contact info question
Hi Judy,
Welcome to the Amel fraternity. If you want parts, contact Olivier Beaute in
La Rochelle via email amel@... (or by phone or fax). Olivier speaks
excellent English and is most helpful.
Hi Judy,
Welcome to the Amel fraternity. If you want parts, contact Olivier Beaute in
La Rochelle via email amel@... (or by phone or fax). Olivier speaks
excellent English and is most helpful.
|
By
Ian Shepherd <ocean53@...>
·
#1917
·
|
|
Amel contact for parts
Judy,
Mr BEAUTE has all the spares you will ever need.
He is extremely knowledgeable about our boats and was an instructor for new
boat deliveries.
He is very charming and helpful. Due to the
Judy,
Mr BEAUTE has all the spares you will ever need.
He is extremely knowledgeable about our boats and was an instructor for new
boat deliveries.
He is very charming and helpful. Due to the
|
By
eric freedman
·
#1916
·
|
|
Amel contact info question
We recently purchased SM2 #387 and have renamed her S/Y Security.
There are several things that we would like to obtain from Amel. I
have heard that Amel maintains some sort of owner database and
We recently purchased SM2 #387 and have renamed her S/Y Security.
There are several things that we would like to obtain from Amel. I
have heard that Amel maintains some sort of owner database and
|
By
jrjrjrouse2000 <judyrouse@...>
·
#1915
·
|
|
Re: Amel Insurance
John,
I'm surprised that you were even able to get a quote from Pantaenius
to keep the boat in Texas gulf coast year round. Last summer the
Pantaenius US branch told us that they would not even
John,
I'm surprised that you were even able to get a quote from Pantaenius
to keep the boat in Texas gulf coast year round. Last summer the
Pantaenius US branch told us that they would not even
|
By
jrjrjrouse2000 <judyrouse@...>
·
#1914
·
|