|
Help please !!! Painting Deck ??
Hello fellow Amel owners.
Our Maramu #143 launched in 1984 has a very "tired" Gelcoat by now -
especially in the white antislip areas. She has recently received a
full Awlgrip painting for the hull
Hello fellow Amel owners.
Our Maramu #143 launched in 1984 has a very "tired" Gelcoat by now -
especially in the white antislip areas. She has recently received a
full Awlgrip painting for the hull
|
By
Jochen Hofmann <jochen@...>
·
#1512
·
|
|
Re: [Amel Yacht Owners] 24 Volt Airpump for Dingi
Hi Rudy,
If there is no more 24V air pump to inflate your dinghy, you can find on the
market good 220V air pump for this use. Look at Italian manufacturers on
Google. Use it with your converter or
Hi Rudy,
If there is no more 24V air pump to inflate your dinghy, you can find on the
market good 220V air pump for this use. Look at Italian manufacturers on
Google. Use it with your converter or
|
By
Patrick Naegels <naegels@...>
·
#1511
·
|
|
Re: [Amel Yacht Owners] 24 Volt Airpump for Dingi
The first thing I did,was to ask Amel in Hyeres.
They told me, that there dont supply anymore this pumps, as it is
a "bricolage".
I should look on the market, were 24 V Airpumps should existe. (
The first thing I did,was to ask Amel in Hyeres.
They told me, that there dont supply anymore this pumps, as it is
a "bricolage".
I should look on the market, were 24 V Airpumps should existe. (
|
By
r.zurkirchen
·
#1510
·
|
|
Re: [Amel Yacht Owners] Bow Thruster Prop Replacement
Thanks everyone, for your advice and ideas on bow-thruster
replacement without short hauling the boat--I did replace it in the
water.
Everyone's advice was valid, but I thought I would share my
Thanks everyone, for your advice and ideas on bow-thruster
replacement without short hauling the boat--I did replace it in the
water.
Everyone's advice was valid, but I thought I would share my
|
By
rossirossix4 <equinoxsolstice@...>
·
#1509
·
|
|
Re: [Amel Yacht Owners] Bow Thruster Prop Replacement
Using the amel tool it takes about an hour and a half.
My problem with changing the prop under water was that the stainless pin had
twisted into the holder and had to be cut out of the plastic- when
Using the amel tool it takes about an hour and a half.
My problem with changing the prop under water was that the stainless pin had
twisted into the holder and had to be cut out of the plastic- when
|
By
eric freedman
·
#1508
·
|
|
Re: Kirk for sale
wrote:
More details please! - Thank you!
Regards
REB
wrote:
More details please! - Thank you!
Regards
REB
|
By
syhanaleism <syhanaleism@...>
·
#1507
·
|
|
24 volt airpump for dinghy
Hello Rudi,
The pump Amel supplies is a very clever adaptation which combines two
12 volt pumps wiring them in series to use 24 volts. They are made in
the UK and used to be very expensive at about
Hello Rudi,
The pump Amel supplies is a very clever adaptation which combines two
12 volt pumps wiring them in series to use 24 volts. They are made in
the UK and used to be very expensive at about
|
By
John and Anne on Bali Hai <hollamby@...>
·
#1506
·
|
|
Re: [Amel Yacht Owners] 24 Volt Airpump for Dingi
Why don't you ask Amel ?
By
Jerome Le Conte <JLC@...>
·
#1505
·
|
|
24 Volt Airpump for Dingi
Hi to all,
is there anyone who has a suplyer adress for 24 Volt Dingipump, The
one Amel delivered, is now out of order.
Thanks for Infos
Rudy
SAMANTHA SM#407
Hi to all,
is there anyone who has a suplyer adress for 24 Volt Dingipump, The
one Amel delivered, is now out of order.
Thanks for Infos
Rudy
SAMANTHA SM#407
|
By
r.zurkirchen
·
#1504
·
|
|
Re: Message index
Anne and John,
I am checking into this with Yahoo. Right now I don't see this as any
standard feature of Yahoo Groups.
Sounds like you would like more than what the SEARCH feature
Anne and John,
I am checking into this with Yahoo. Right now I don't see this as any
standard feature of Yahoo Groups.
Sounds like you would like more than what the SEARCH feature
|
By
Zanareva
·
#1503
·
|
|
Message index
Hi Richard,
Is there any way in which the 1500+ messages can be indexed to make it
possible to see whether any particular subject has already been
explored. The French Amel site has one and I thik
Hi Richard,
Is there any way in which the 1500+ messages can be indexed to make it
possible to see whether any particular subject has already been
explored. The French Amel site has one and I thik
|
By
John and Anne on Bali Hai <hollamby@...>
·
#1502
·
|
|
Potentially Hazardous Problem - NMEA Multiplexer
To all,
I wanted to report a potentially hazardous problem that I
encountered. My autohelm would suddenly turn the boat sharply
without notice. I installed an NMEA multiplexer made by Noland.
To all,
I wanted to report a potentially hazardous problem that I
encountered. My autohelm would suddenly turn the boat sharply
without notice. I installed an NMEA multiplexer made by Noland.
|
By
fruehaufp <fruehaufps@...>
·
#1501
·
|
|
Turning off emails of posted messages
Yves,
Yes, you can accomplish this, here's how. On the main Amel Yacht
Owners Group webpage, click on the link "Edit Membership". Scroll
down to "Message Delivery". Now check the button "No email -
Yves,
Yes, you can accomplish this, here's how. On the main Amel Yacht
Owners Group webpage, click on the link "Edit Membership". Scroll
down to "Message Delivery". Now check the button "No email -
|
By
Zanareva
·
#1500
·
|
|
(No subject)
Amelyachtowners@...
Since we will be at see or in remote countries for a while, we will not be able to read our ashore e.mail box for several weeks. The numerous interesting messages we
Amelyachtowners@...
Since we will be at see or in remote countries for a while, we will not be able to read our ashore e.mail box for several weeks. The numerous interesting messages we
|
By
mcymabm@voila.fr <mcymabm@...>
·
#1499
·
|
|
Re: [Amel Yacht Owners] Bowthruster prop replacement
Hello to all,
I do not believe that you can remove easily the pin with scuba tanks. I had
a similar problem in Greece and the pin was badly bend and it was impossible
to be removed without taking
Hello to all,
I do not believe that you can remove easily the pin with scuba tanks. I had
a similar problem in Greece and the pin was badly bend and it was impossible
to be removed without taking
|
By
Krassopoulos Dimitris <dkra@...>
·
#1498
·
|
|
Bowthruster prop replacement
Hello Bob,
It is a doddle. I assume you have a spare prop which comes with the
boss which fits onto the drive shaft. Look at the boss and you will
see that has a hole through which there is a
Hello Bob,
It is a doddle. I assume you have a spare prop which comes with the
boss which fits onto the drive shaft. Look at the boss and you will
see that has a hole through which there is a
|
By
John and Anne on Bali Hai <hollamby@...>
·
#1497
·
|
|
Bow Thruster Prop Replacement
I've lost my bow thruster prop. Does anyone have experience in
removing the bow thruster foot or replacing the prop without taking
the boat out of the water? I see that amel sells a kit for doing
I've lost my bow thruster prop. Does anyone have experience in
removing the bow thruster foot or replacing the prop without taking
the boat out of the water? I see that amel sells a kit for doing
|
By
rossirossix4 <equinoxsolstice@...>
·
#1496
·
|
|
Re: SULAJON SM #347 ENGINE WON'T RESTART WHEN HOT
Hi, I had reported on this forum,that last year, several times, my
yanmar did not start. i have installed a " bridge" between the +
and -on the starter, so i could easy bridg the contact. Neverless,
Hi, I had reported on this forum,that last year, several times, my
yanmar did not start. i have installed a " bridge" between the +
and -on the starter, so i could easy bridg the contact. Neverless,
|
By
r.zurkirchen
·
#1495
·
|
|
Shroud covers
Has anyone replaced the shroud covers, 1/2 in. ID on the main shrouds
in the US? Where did you get them.
Thanks,
Jim Wiggin ANTARES SM 2000
Has anyone replaced the shroud covers, 1/2 in. ID on the main shrouds
in the US? Where did you get them.
Thanks,
Jim Wiggin ANTARES SM 2000
|
By
jjwiggin02 <no_reply@...>
·
#1494
·
|
|
Re: [Amel Yacht Owners] Grounding
It happened before I owned the boat but most of the instruments were fried and those that sirvived needed repair.
Tom, Tempest Mango #44
It happened before I owned the boat but most of the instruments were fried and those that sirvived needed repair.
Tom, Tempest Mango #44
|
By
tom mcguffy <tmcguffy@...>
·
#1493
·
|