The build up in the plumbing is common in urinals and in the Uk plumbers use hydrochloric acid which is known as muriatic acid in the US, to disolve it Poisionous fumes are released and can damage

Hello I am the owner of a 1983 Maramu. I am looking for someone to sail my boat from Turkey to Thailand. Anyone interested?

Hi Thomas, We just took out our Perkins Prima T80 engine and re-powered our Super Maramu to the 100 HP Yanmar. If you are interested I have the old engine and all kinds of other parts for that. I

My 2002 SM 2000 #369 "CALLISTO" has enstalled the Furuno/Navionics Navnet chart plotter / radar. I am trying to transfere waypoints and routes form the host plotter that sits at the nav station to

Hello, I have a 1992 Super Maramu in Ft. Lauderdale and need to replace the manifold and oil cooler. It appears so far that the only source of parts for the engine, Perkins Prima 80T, are from UK.

Hi Georges, Thanks for or quick response. Yesterday I have got from Mr Olivier Beaute from the Amel Yard in La Rochelle the exact dimension of the width of the Santorin keel shoe: 86 cm. That means

My santorin is on land in Greece (Leros), but I am presently in the US. By memory it is very close to 1meter (3' 3"). Regards Georges Pellegrini 96 Santorin #132

has anyone posted or at least taken pictures of their propane conversion? I am in the process of doing it, and would be interested in seeing what another SM conversion looks like, especially

Hello fellow Santorin owners, My boat is in the water in Greece and I am engaged in een e-mail discussion with a boat Yard here in Corfu. They asked me the exact width of the wingkeel at the bottom

Hi Gary, I use PB Blaster (Blaster) on boats that are on the hard. I stuff a rag into the thru hull fitting from the outside to protect the bottom paint and spray the Blaster into the top of the

I have a burgee that must be flown from the top of the main mast. What have any members done to rig this? Fair Winds, Eric Amel Super Maramu #376 Kimberlite

Hi Steve: Regarding your use of the PB Blaster product, I looked on the PB Blaster web site to see what was in their PB Blaster Penetrating Fluid. While I have used vinegar to good effect I am

Mike, The buildup is caused by urine and not seawater. Very complete flushing and occasional use of vinegar will reduce buildup. The penetrating fluid "PB Blaster" will help free stiff thru hull

After about a year i noticed a smell when i passed the forward head. i eventually tracked it down to the plastic pipe that connects to the copper pipe. The hose was filled with those crystals and

I had the same exact problem at the same exact location on my santorin. The tank is original from amel. the only difference is that the copper tube on my boat is connected to the ground, but it did

As mentioned before, we experienced significant buildup of deposits on the copper tube walls where the head pump hose feeds the holding tank. Thickness on the main head was over 1/4" and the

Mike, To eliminate future problems with buildup of the hard crystal in the line,hang the shower nozzel on the curtain hanger next to the toilet. When you flush(,the right toggle only on the black

We are only the third owners of this Mango. It is in excellent condition. Give us a call for the full scoop. Henry 858 967-6104

I have just sold my supermaramu 2000 and am hoping to replace her with either a well looked after Sharki or Santorin. If anyone has any details of any for sale I would appreciate information.

Gary, I installed the new membranes and end caps. Everything works well. I get an 87-95 micro siemens when the unit is running. I plumbed it as you did. I think I am going to use a chase nipple and