I have had great luck with this antenna and wi-fi router. It has been working great for a few years and is inexpensive. If you have a problem , when you call you speak to the owner. Fair

Agree. The systems using a Bullet use a Cat 5 LAN cable. ~~~⛵️~~~Matt

I think it is the nut and locking washer for the spare prop. Fair Winds Eric Amel Super Maramu #376

Good advice Paul

Thanks Matt Appreciate the feedback which aides my search. Cheers

I do not recommend systems that use a USB cable to the antenna (such as Red Box). There is too much power loss in these cables. Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada

There are many systems out there to choose from. Costs for the kit start at close to $400. They consist of a Ubiquity bullet (a radio receiver tuned for 2,4 ghz), a PoE injector (Power over Ethernet),

There were a couple of different rub rails for the Mango and just one, all but certain, on the Sharks and Maramu. They share nothing in common with the Santorin and Super Maramu insert. JOEL F.

Charles, My understanding is the Mango rail is quite different, but that is thirtd hand, at best Here is a photo of the insert from an early Super Maramu, before Amel switched to a white extrusion. .

Hello Karen, I am interested in joining the order (will commit today) if the rail you are going to extrude would fit my Amel Mango. Do you have a profile/drawing/picture you can share? Or do you know

Martin, We have been using a Webcatcher (I believe the same as a Bullet) which I bought from Diginav in Le Marin 4 years ago and it has worked perfectly ever since. There was a choice of 3 antenna

We have an extruder in the USA to make a custom extrusion of the Amel rubber rail that fits the Super Maramu and Santorin. The material will be white EDPM, and it will be supplied in 2 pieces each 16

Il 14/03/2020 14:57, CW Bill Rouse ha scritto:

The bottom part goes between the shaft nut and your prop (if it’s a fixed blade, not sure about folding). At least that’s where mine has always been. Ian & Margaret Local Lola II SM153

That’s the bolt and washer for the spare fixed pitch prop. Joel JOEL F. POTTER-CRUISING YACHT SPECIALIST~L.L.C. THE EXPERIENCED AMEL

Hola Amelians, I am looking for current reviews on the best wifi extenders....... I searched the user site files and couldn't find anything new or relevant. Objective is to grab shore wifi while at

I hope I do not get the same experience as you. But will probably install floor lockers to be on the safe side Paul SY Kerpa SM#259

Here is a photo of the part to ID: CW Bill Rouse

Caraibe Marine in Martinique is an Onan dealer. email contact@...

All, I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.