Hi All! The foam backed headliner/ wallcovering that Amel used in 1979 on my Euros 41 is falling down/off as it seems the foam has dissolved. I know that this is a common problem. How can you

I ordered directly from http://www.ifmefector.com/ifmus/web/home.htm. Unfortunately I have not the Part-No by hand. The Part-No is written on the chain counter. Best regards Hanspeter Wehrli SM

I got one from Pochon. Jerry "Vicente Pereda" <VPEREDA@...> wrote:

Hallo everybody, I am trying to replace the chain counter in the cockpit in my SM sn 107. Does anybody Know were to get one of those for chain of 10 mm.? Thanks in advance. Vicente

Stephan, You are the only person whom I have found, that has actually used a Gale Sail. I posted a request for information some months ago at the SSCA web-site on this subject and did not get a

what type of storm sails have been used on the sm and kind of drogue or sae anchor? has anyone flown a storm sail or used a drogue? thanks eric freedman kimberlite

Many thanks for the advice. Regards Millie & Chris <closereach@y...> wrote: been other opposite way the so more

Hi Stephan. The cheapest and probaly most efficient way in terms of output is to use a DC/DC converter from Targus ( http://www.targus.com ). Input is between 8 to 16V and output will be according to

Millie and Chris, In the summer of 2001 I unstepped both masts and replaced all the rigging. After restepping, the way I have tensioned the rig has been progressively to sail to stronger winds.

Message text written by INTERNET:amelyachtowners@... If you mean a wire antenna the simple solution is to put ceramic insulators in the starboard mizzen backstay, the top one being about

Message text written by INTERNET:amelyachtowners@... The crash bar sounds good but you will need a ring welded on at each end to take a webbing safety belt. Bali Hai was suppllied fitted

Message text written by INTERNET:amelyachtowners@... May I suggest that drilling or better punching a hole in the centre of the upper outlet flap and using a small countersunk machine

Hello postmaster, i wonder why my e-mail adress shows completely, while the ones from all the others is partially hidden. thanks for keeping this group up. so long tom

When installing the halogen bulbs, you MUST clean the bulb first with alcohol and then not touch it with your fingers. This is true even if you remove the bulb from the package without touching it.

This is correct. When you start the engine the brake is released when you stop the engine the brake is engaged. On "Alma Libre" I have installed the system in order to load the batteries from the

MY SM #347 HAS A YANMAR ENGINE AND ZF HURTH TRANSMISSION WITH HYDRAULIC PROP BRAKE. WHEN THE ENGINE IS NOT RUNNING, THE PROP DOES NOT TURN. HOWEVER IF I AM RUNING THE ENGINE IN NEUTRAL WHILE SAILING

Hello all: I am presently the owner of a Valiant 32, a stout, wonderful cruising sailboat, but a bit small for my needs. We are thinking of moving up, and are considering a Sharki. I would

Hello members, does anybody in this group has further experience with this engine type and the Borg Warner hydraulic gear box. My questions are: 1. Does the propeller shaft need to be fixed during

or the that Hallo Martin, wegen der Schleifmaschine kann ich nur zu einer Festo Rotex raten. Ich habe damit eine Osomosesanierung an einem 30qm Unterwasserschiff durchgeührt (kein Amel Schiff!)

I bought a Gale Sail for my SMM (#303) and have used it a number of times. It the most recent use, we used it to make modest progress in sailing through a 50, gusting 60 storm. The trick in