Thanks for sharing Kindest regards Arthur

Very helpful, thanks! ~~~⛵️~~~Matt

Thank you Kevin for good instructions. Kindest regards Arthur

Good Morning Alexandre. Thank you for showing me all very informative pictures. Sincerely Arthur

Thanks Bill! I dive down replace the delrin hub and mount the new propeller with new nylon screws. See if it works out under water. Then zincanod on prop I replaced under water in some minutes that

Reference the attached pdf. It indicates that button to press is not the rotary button but the top left button. Good luck and let us know what fault code you find. -- Mark Mueller Brass Ring A54

Joel, We need to figure out something. I will work on it and come back with a plan. Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550

Thanks Nick, I think I'll take your advice on that. I also tried the 7 sec (and longer) roto knob press as advised by Thomas from Garulfo, but nothing happened - maybe a different software

Carina, I apologize but I got distracted when aboard last weekend and forgot to see which black streak remover product I have aboard. It is one of these

I replaced mine. Screwdriver, snorkel and mask and calm water. Straightforward job. Ian Ocean Hobo SN96

No more problems with the ejf after one year and about 9000nm. Bamar themselves told me the mej top seal is a bad design and they didn't want to sell us kits to rebuild it. A few others have opened

Hello Arthur, I have had to replace the bow thruster prop underwater. I found that the easiest way align the nylon screws to the hub, was to use 3 stainless screws about 1/4-1/2” longer than the

Good morning Arthur, Scroll down the pictures of the Bow Thruster illustration: http://nikimat.com/bow_thruster_overhaul.html I once scuba dive to replace the propeller, sadly to discover later

Brilliant solution. My 1st mate has stated several times that "Maybe we otter" do something to cover/protect the switches while underway. I see a great cottage industry opportunity here here. This

Hi Joel I like your idea of the reward ! but start very low for the late starter who might not achieve very much !!🤓 -- Nicolas Klene DarNico SM2K # 471 In Marseille

Bravo !! what an achievement and an example ! I hope I’ll be able to do a little bit of your amazing voyage in the next 20 years !! -- Nicolas Klene DarNico SM2K # 471 In Marseille

You should replace the delrin hub and screws. Search PHOTOS for "thruster" on the Group website. There are plenty there. Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720

Hi Paul, I had the same thing in Grenada. Grenada Marine were the Volvo agents but frankly were useless. The technician arrived but could not log into the Volvo network as he had not paid up! He

Hello Paolo; It is great to see that you are contributing to this forum. There are so many lessons that are better learned as shared, rather than experienced in person. I’m sorry to see that

I need some pictures to understand how to fit the new bowthruster propeller. Propeller and 6 nyloscrews are gone. The round nylon with Tap is there. Can I use that old one and screw the new propeller