Thanks I appreciate the information

Hi Courtney, It was a fellow 54 owner, Jerome, the former owner of No Stress, who pointed at my Wasi and said: that Wasi is a joke, replace it with a Spade 55kg ASAP, and thank me later. That's

Hi Amelians, I want to replace some worn-out headsets we've used for anchoring and masthead work. They were about $80 US 5 years ago and have been less than ideal since they were new, with static and

Haldun could you comment about how the spade does in tougher anchoring situations? Poor bottom, deep, ect thanks Courtney Trippin 54 #101

Guillaume, Eric SM Kimberlite also did this and posted some photos: Search under photos for "dishwasher" Here are a few photos:

Peter, It is the 55kg Spade on the picture, it fits perfectly when snug. Wasi is demoted as the second anchor. Sorry, i'm away and i can not attach any photos now. Windlass is strong enough to handle

Dear Paul, this is something I have been thinking of doing... Would you have any schematics / pictures / list of items you could share? Many thanks, Guillaume Carpathia III - SM2K #293 Malta

Pat, I saw the rub rail "rubbery" insert like your vintage SM... when it arrived from France for another boat, it was coiled in a circle of about 2' diameter

IMPORTANT- Read this first You earlier said that the "fresh water pump runs continuously unless turned off." It may be running because it is not achieving the correct pressure, adjusting the pressure

Yes, the lack of flow is caused by a lack of sufficient pressure. In my experience, the lack of pressure can be caused by: An open tap No A break in the freshwater circuit No A defective solenoid

Paul, I just watched some video of a Rocna testing, resetting after a 180 shift,which did show a problem resetting until the boat slowed to one kt. ,They only had a 3:1 scope , I probably never have

Tnx pon, 24. velj 2020. 12:45 marklesparkle59 <marklesparkle59@...> je napisao:

Hi Haldun Thanks for a quick answer. Sorry i misspelled your name. Some questions which you hopefully could easily answer: Do you think its the 55kg which is on the picture? Did you have a second

Hi Peter, Yes i have a 55kg Spade, and i am very happy with it. Cheers, Haldun sv Amanin A54#164 Gokova -------- Orijinal mesaj -------- Kimden: Peter Tiner <peter.tiner@...> Tarih: 24.02.2020 15:52

I contacted Maud about buying a new rub rail insert ,she cannot provide an estimate for shipping. We are thinking it may be much more than we first estimated. Has anyone had the inserts shipped to the

Hi all Amelians I have a Wasi Bugel 42Kg fitted to my 54 and i´m going to switch to i think a 44Kg Spade. Yes, i know it´s big but i´m into "when your neighbors starts laughing , then it´s big

Three problems I am addressing on Sharki#96 right now are the headlinings and the bulkhead in the aft cabin. The 9mm bulkhead rots because water gets in between the plywood and the fibreglass of the

Once you have a good once over for general condition (pay attention to how it is kept) be sure to focus on drive shaft thru- hulls mast and rig. Mine looked great and I knew what I needed to

In mid march i will go with mine mechanic in Lefkas, Greece to look at Sharki any tips on what to look for on the boat as special problems on Sharki.

We ”replaced” our dishwasher, I built a freezer using polystyrene panels 10 cm in the sides, 15 cm in the bottom, in the top we used 13 cm. Total volume about 40 liters. As liner we used a ca 1 mm