Congratulations on your new boat Paul. We spent time with Jean Paul and Nicole in Bonaire, Panama, and Hawaii, and assuming Aramis is there previous boat, you have a very nice Amel. If you are still

Hello Paul; Welcome to the group. Wishing you many great adventures aboard your Amel. Happy Sailing; Mohammad and Aty B&B Kokomo AMEL 54 #099

The power assist with the quattro can be used in a situation where the shore power is not a high enough amperes. Michael nebo small 251 Sent from Yahoo7 Mail on Android

I have recently been through this process with a new installation. You may find that the c drive mounts have sagged from the original position just a few mm as the c drive is in 2 sections. Your

Welcome aboard Paul. I think we crossed paths in Providencia. I wish you all the best. Daniel and Lori Carlson on sv BeBe currently in Cartagena Columbia (and heading east)

Congratulations Paul enjoy your new vessel Cheers 🥂 Courtney svTrippin 54#101 MARIN

Salut Paul, We are good friends of the PO. We helped each other out from Lanzarote to S of Panama. Welcome aboard Jean-Pierre Germain Eleuthera SM 007 NZ

Hi Paul, Congratulations.Hopefully our paths will cross out here one day. With bestregards, Mark Skipper Sailing Vessel- Cream Puff - SM2K - #275 Currentlycruising -

Hello, My name is Paul Guenette. I am the proud and happy owner of Aramis, a Super Maramu 2000. Aramis is hull number 444 and was built in 2004. I am currently in the Sea of Cortez just south of

I just posted a Marumu Mainsail in Parts for Sale

Thomas, Thanks for your posting. Did you try Dessalator.com for these brushes? I think this is important to know.

I don’t have an Amel yet but I had similar issues with my old Yanmar and it turned out to be the cable. You might want to disconnect it and try the shifter manually to rule it out. Brent Cameron,

Hello, Did you check your gear oil? Any water in it? Did you service the gear oil cooler? Oliver from Vela Nautica Amel54 #39 Martinique

My Santorin is turning clockwise........ if you believe the direction of the prop alternator John Hayes Ngawaka sn 41

Hi Daniel, thanks for your reply. I have now 2 replies...one say right, the other say left. Leaving me with no other choice as to wait until I get my boat out of the water and physically check what I

amazing...as i was just in the process of talking with them. I have the same issue with pantan.

I received a notice of non-renewal from Novamar today. They stated in the letter that the reason for non-renewal was a change in their underwriting practices. They also said that the non-renewal was

Hello all. My name is Victor Molero and this is my first apprearance in this group that I have been following for a while. I am overwhelmed by the accumulated knowledge and experience that is shared

This is a perfect example of why we need to continue to support SAV at Amel. This particular part is for a rub rail that has been out of production by Amel for over 20 years. I believe it was replaced

To All interested, I just got the top seal lifted from the rub-rail on my SM #201 (1997). Fits the profile that I received from Maud (AMEL). Attached see pictures: Jarek Zemlo NOA BLUE SM #201