|
Re: Selling an Amel Mango
What is your asking price?
sri, 5. velj 2020. 15:37 Arnold Mente via Groups.Io <Arnold.mente@...> je napisao:
What is your asking price?
sri, 5. velj 2020. 15:37 Arnold Mente via Groups.Io <Arnold.mente@...> je napisao:
|
By
Ivica Curlica <ivica.curlica@...>
·
#50336
·
|
|
Re: Selling an Amel Mango
Sorry it is too big for me alone.
sri, 5. velj 2020. 23:13 Ivica Curlica <ivica.curlica@...> je napisao:
Sorry it is too big for me alone.
sri, 5. velj 2020. 23:13 Ivica Curlica <ivica.curlica@...> je napisao:
|
By
Ivica Curlica <ivica.curlica@...>
·
#50335
·
|
|
Re: Watermaker motor
Hello
There are 4 brushes on the motor. They are held in place by rubber covers that you unscrew.
I find it easier to bring the motor out of the engine room to work on the brushes.
I cleaned the
Hello
There are 4 brushes on the motor. They are held in place by rubber covers that you unscrew.
I find it easier to bring the motor out of the engine room to work on the brushes.
I cleaned the
|
By
Sv Garulfo
·
#50334
·
|
|
Re: Reefing and sail-handling on conventionally rigged Maramu, versus electric furling?
Dennis,
Do you have a picture of how you have run your lines. Would be very interested in seeing specifically how you have this setup.
Thanks!
wade
Maramu #124
Dennis,
Do you have a picture of how you have run your lines. Would be very interested in seeing specifically how you have this setup.
Thanks!
wade
Maramu #124
|
By
Wade Shikoski
·
#50333
·
|
|
Re: Gas struts for windscreens
Hello,
We got ours from alrose UK. We chose slightly different dimensions because they were off the shelf ones, thus better lead time and price.
Happy with the results; hopefully they’ll last 10
Hello,
We got ours from alrose UK. We chose slightly different dimensions because they were off the shelf ones, thus better lead time and price.
Happy with the results; hopefully they’ll last 10
|
By
Sv Garulfo
·
#50332
·
|
|
Re: Reefing and sail-handling on conventionally rigged Maramu, versus electric furling?
Hi Paul,
If you have been reading this site for a while, you will have seen entries regarding the repair/maintenance of the motors and/or rigging of the electrical furling systems. Don't get me
Hi Paul,
If you have been reading this site for a while, you will have seen entries regarding the repair/maintenance of the motors and/or rigging of the electrical furling systems. Don't get me
|
By
sbmesasailor
·
#50331
·
|
|
Re: A54 fridge circulation pump
Scott,
You hit the nail on the head. I was ready to shut this thread down when you made your comment. I believe that Oliver Henrichsen is a very good engineer and has a working, unique, and clearly
Scott,
You hit the nail on the head. I was ready to shut this thread down when you made your comment. I believe that Oliver Henrichsen is a very good engineer and has a working, unique, and clearly
|
By
CW Bill Rouse
·
#50330
·
|
|
Re: A54 fridge circulation pump
Matt, I agree with you the term "once and for all" is a relative term, but I like to think on the good side - that it will significantly improve what I have right now. Or at least I will have "fun"
Matt, I agree with you the term "once and for all" is a relative term, but I like to think on the good side - that it will significantly improve what I have right now. Or at least I will have "fun"
|
By
Jamie Wendell
·
#50329
·
|
|
Re: A54 fridge circulation pump
Solving a problem once and for all? On a cruising sailboat? Good luck! Of course you will delay the inevitable. I switched from CAL pumps for my ac unit (3 in 5 years) to a March Pump. The March pump
Solving a problem once and for all? On a cruising sailboat? Good luck! Of course you will delay the inevitable. I switched from CAL pumps for my ac unit (3 in 5 years) to a March Pump. The March pump
|
By
Matt Salatino
·
#50328
·
|
|
Re: A54 fridge circulation pump
Jamie,
The output from the Frigoboat E51385 box is 12v. As Bill mentioned, it's the fan controller on the compressor that outputs 12v, seems the Frigoboat box only passes that through.
Not sure if you
Jamie,
The output from the Frigoboat E51385 box is 12v. As Bill mentioned, it's the fan controller on the compressor that outputs 12v, seems the Frigoboat box only passes that through.
Not sure if you
|
By
Scott SV Tengah
·
#50327
·
|
|
Re: washing machine and dryer for Amel 54
I installed the Beko WTE6511BW. It barely fits but the advantage is that has a 6kg load capacity, bigger than the original Bosch.
A few notes:
1) To secure from the rear, there are two holes where the
I installed the Beko WTE6511BW. It barely fits but the advantage is that has a 6kg load capacity, bigger than the original Bosch.
A few notes:
1) To secure from the rear, there are two holes where the
|
By
Scott SV Tengah
·
#50326
·
|
|
Re: A54 fridge circulation pump
Oliver, I just ordered the Censored Motor and VESC Controller from AliExpress. I am going to try to hook all this up and see if I can get it to work for my 3-fridge system.
Where did you source your
Oliver, I just ordered the Censored Motor and VESC Controller from AliExpress. I am going to try to hook all this up and see if I can get it to work for my 3-fridge system.
Where did you source your
|
By
Jamie Wendell
·
#50325
·
|
|
Re: Bow thruster service SPECIAL TOOL
Hi Stefania, we are on hard in Bocca di Magra and we have the tool, if you want to see it email me directly
Pietro e Licia
Bolero SM 364
Inviato da smartphone Samsung Galaxy.
-------- Messaggio
Hi Stefania, we are on hard in Bocca di Magra and we have the tool, if you want to see it email me directly
Pietro e Licia
Bolero SM 364
Inviato da smartphone Samsung Galaxy.
-------- Messaggio
|
By
Pietro Zaccari
·
#50324
·
|
|
Re: genoa sheet track end cap/pulley block
Hi Alan, mine are eye bolts,
regards
Danny
SM 299 Ocean Pearl
Hi Alan, mine are eye bolts,
regards
Danny
SM 299 Ocean Pearl
|
By
Danny and Yvonne SIMMS
·
#50323
·
|
|
Re: washing machine and dryer for Amel 54
Hi, Sharon here,
just wondering if you managed to find a replacement, washing machine?
Just starting the looking to replace ours on our 54.
Thanks in advance.
Sharon
Hi, Sharon here,
just wondering if you managed to find a replacement, washing machine?
Just starting the looking to replace ours on our 54.
Thanks in advance.
Sharon
|
By
ya_fohi
·
#50322
·
|
|
Re: Reefing and sail-handling on conventionally rigged Maramu, versus electric furling?
David, thank you for telling me about your set-up on Air Ops, which sounds like a very good alternative to the Amel motorized, in-mast furling. My understanding is that in-boom furling allows the sail
David, thank you for telling me about your set-up on Air Ops, which sounds like a very good alternative to the Amel motorized, in-mast furling. My understanding is that in-boom furling allows the sail
|
By
Paul Villinski
·
#50321
·
|
|
Re: A54 fridge circulation pump
Hi Oliver,
We met in Culatra. Welcome to the Caribbean! How long to you plan to stay in Martinique?
Cheers,
Paul
S/Y Ya Fohi - Amel 54 #98
Hi Oliver,
We met in Culatra. Welcome to the Caribbean! How long to you plan to stay in Martinique?
Cheers,
Paul
S/Y Ya Fohi - Amel 54 #98
|
By
Paul Dowd and Sharon Brown
·
#50320
·
|
|
Re: Bow thruster service SPECIAL TOOL
Thanks for the suggestion Pat! Very useful
I’ll try to find someone nearby
Stefania Dente
Euploia SN 93
Thanks for the suggestion Pat! Very useful
I’ll try to find someone nearby
Stefania Dente
Euploia SN 93
|
By
ste.dente
·
#50319
·
|
|
Re: Selling an Amel Mango
Hi Frederic,
I would recommend Michel Carpentier, he is selling only Amel!!
michelcharpentier.com
Best
Arnold
SY Zephyr
SM 203
Am 05.02.2020 um 14:53 schrieb Frederic F <fgf@...>:
Hi everyone,
we
Hi Frederic,
I would recommend Michel Carpentier, he is selling only Amel!!
michelcharpentier.com
Best
Arnold
SY Zephyr
SM 203
Am 05.02.2020 um 14:53 schrieb Frederic F <fgf@...>:
Hi everyone,
we
|
By
Arnold Mente
·
#50318
·
|
|
Bow thruster tool
As a newbie inn the pack I read and heed all the advice on the Owners site.
the info on bow thruster service and maintenance is very informative and rewarding.
There is mention and reference to 'THE
As a newbie inn the pack I read and heed all the advice on the Owners site.
the info on bow thruster service and maintenance is very informative and rewarding.
There is mention and reference to 'THE
|
By
william reynolds
·
#50317
·
|