Good Day Amelians, Just a note for any 54 owners regarding the thruster up/down motion. Being aboard, I like to run tests on all systems. In both my last and current stays aboard, I encountered the

Arlo, Sorry to hear that the hose you ordered seems to be too flexible. Jamestown Distributors (Rhode Island) appears from the website to have the Algonquin hose in stock though not your exact

Ah, the Zen of fixing your boat in exotic ports!

Hello James. The measurements I took are right at the end of the hose on the stern tube where the hose stops once fully seated. Same on the stuffing box, so the barbs if any are not included. We are

Hi Arno, thanks, very good ideas and descpription. Something to add. Olivier Beauté (Amel boat expert ond former SAV of Amel) instructed me so, and I do it with good success since over 4 years.

hi Craig, all, I’m pleased to report that I was able to implement Craig’s suggestions to repair the plastic/aluminium clutch gear of the Marina ZZ bilge pump gearbox. Interestingly, it initially

I second that, when I changed my 14mm genoa sheets for 12mm the sheets were less comfortable and maybe even stretched a little under high loads. Mark Porter Sea Hobo Shark #96 Sent from my Samsung

Hi, here you can find ALL what you need!!!! https://amelyachtowners.groups.io/g/main/filessearch?q=Running+rigging Arnold SY Zephyr SM203 Am 14.12.2019 um 18:24 schrieb Matt Salatino via Groups.Io

Many times, the smaller diameter line is plenty strong, but the larger diameter line feels better in the hand, easier to pull and handle at the expense of increased weight.

Always such useful information on this forum. Thank you to all. We also find that wiping plates, pans, etc. with paper towels is a great prevention technique. Additionally, we use vinegar in between

Hello everybody can somebody tell me if there main sail sheet coming in the cockpit on the winch on the mizzen mast is 12mm or 14mm is mandatory ? I have 14mm , and was wondering if it would be

Hi Joerg, I'm not sure how the bilge is designed on a A55 but I only use the Kärcher in the bilge-pit itself, for the A54 there is no insulation there and keeping the water-level low to begin with,

Arlo, I was wondering how you were measuring the OD on your stuffing box and stern tube? I have always sized my hose to the root or the base/pipe OD of the fitting which does not include the

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. /SHARKI

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. /SHARKI

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. /SHARKI

When Judy and I were still cruising, she told me it was a dirty job and "someone" had to do it. I used a wet vac also, but anyone who knows me, knows I use a wet vac for lots of things. Best, CW Bill

Ready to accept any and all😀 Best, CW Bill Rouse Amel Owners Yacht School - www.AmelOwnersYachtSchool.com 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970

Hey there Danny. I called them today and they dont have any 4 or 5 ply in stock of that size...they are doing some research for me. Great place as I have bought hose there before and appreciate the

Great minds think alike. Your comment about the tides hose use with a traditional stuffing box and the additional resistance was exactly my concern as well. I called Tides technical support this