Hi Mark Congratulations! Bet you guys are really excited! There are riggers in Canet but I don’t know if they are any good I am afraid. Andrew SM 472

Hi This is the diagram I have Andrew SM472

Hi our bow thruster suddenly decided it would not come up. The electric motor was fine, everything was connected. I got a local mechanic to come in and he repaired the bow thruster in his workshop.

We are now the very proud new owners of Nunky which is SM110 from 1993. Despite her age Nunky is in incredible condition due to the care her former owner lavished on her. As an example, he would only

Gary, I was able to reserve a table for 16, and 17 signed up for that table a week or so ago. Since then Aras contacted Mangia and was able to reserve a table for four or six I think , they may hold

Hi guys, Here is what we used: I did reuse the flowjet pump and replaced the motor by a brushless scooter motor. These motors are very strong and got no wear parts except the ballbearings for less

Eric, Everywhere outside of North America uses BSP. NPT is a US invention. Cheers Alan Elyse SM437

I don’t want to promise but I will try but if not then it’s lucky that Davis will still sell me cold beer even if your not there. Best Alan Get Outlook for iOS

That’s odd that they use BSP and not NPT. Thanks Eric

Yep, steering cable for sure. Best, CW Bill Rouse Amel Yacht Owners School - www.AmelYachtOwnersSchool.com 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970

Italy which happens to historically be the country of better marine pumps. Best, CW Bill Rouse Amel Yacht Owners School - www.AmelYachtOwnersSchool.com 720 Winnie St Galveston Island, TX

Hi Bill, Where are these pumps made? Fair Winds Eric Kimberlite Amel Super Maramu #376

We’re already signed up. This is the Italian place right at the circle, right? ~~~⛵️~~~Matt

I believe Arno is correct, the original photo shows the terminal end of the steering cable. The attached photo shows a larger perspective and where the cable end attaches to the quadrant. The linear

Eric BSP 3/8" on the UP/2 -- CW Bill Rouse

Are those pumps a BSP thread or a NPT thread? Fair Winds Eric Kimberlite Amel Super Maramu #376

So it sounds like you will not be joining us for the maintenance discussions at 2:00 on Aletes? Depending on how that goes we may not get to Davis’ til 5:30ish.

Alex & Arno AND others interested In the early days of the 54 production, there were at least some fitted with the same Raymarine M81134 Type 2 Long Linear Drive 24 Volt units, Raymarine 7001+

Hi Scott We are currently wintering in north Sicily and planning to cross late next year to the Caribbean, so it’s a long shot, if you still have it on board when you get to Australia if that’s

Hi Scott, Clearly having gas continue to flow with no flame should not be able to occur. It sounds like this started happening only after the boatyard worked on the stove - what was it they were