|
24v alternator
Thanks Alan, James and Bill for your comments.
I can not see that there is any difference between Alan’s set up and mine. So it must be fine tuned.
I have seen other 54’s with the 24v alternator
Thanks Alan, James and Bill for your comments.
I can not see that there is any difference between Alan’s set up and mine. So it must be fine tuned.
I have seen other 54’s with the 24v alternator
|
By
ngtnewington Newington
·
#48833
·
|
|
Re: Remote two way valve for flushing the water maker
Yes Paul, that's how it works.
And when we start the watermaker we run it for a few minutes to allow the incoming saltwater to fully flush out the fresh before increasing the pressure slowly to start
Yes Paul, that's how it works.
And when we start the watermaker we run it for a few minutes to allow the incoming saltwater to fully flush out the fresh before increasing the pressure slowly to start
|
By
Alan Leslie
·
#48832
·
|
|
Re: tb/BRISBANE area marina & yard/AYOG
Hi Dean,
Can you send me your contact information:teun@... or teun at amelit dot net
Best Regards Teun
SV AMELIT A54 #128
NOUMEA NEW CALEDONIA
October 26, 201916:22:52
Hi Dean,
Can you send me your contact information:teun@... or teun at amelit dot net
Best Regards Teun
SV AMELIT A54 #128
NOUMEA NEW CALEDONIA
October 26, 201916:22:52
|
By
Teun BAAS
·
#48831
·
|
|
Re: Yanmar Diesel Won't Stay Running
And the winner goes to vacuum in the line. Bled the lines and averting is purring like a 80 HP Diesel.
Thanks all!!! I’m still going to check the vent lines we have a lot of wasps around. some of
And the winner goes to vacuum in the line. Bled the lines and averting is purring like a 80 HP Diesel.
Thanks all!!! I’m still going to check the vent lines we have a lot of wasps around. some of
|
By
Mark Garver
·
#48830
·
|
|
Re: seals orientation
That is how I have been orienting my seals for the last seven years now. I have had no water ingress, and no loss of oil.
Kent
Kristy
SM 243
HI Jose,
How many hours do you have on the seals, and
That is how I have been orienting my seals for the last seven years now. I have had no water ingress, and no loss of oil.
Kent
Kristy
SM 243
HI Jose,
How many hours do you have on the seals, and
|
By
karkauai
·
#48829
·
|
|
Re: Remote two way valve for flushing the water maker
Paul, yes that’s how it works. With no power on the solenoids the open one let’s salt water in and the closed one keeps freshwater out. Throwing the switch provides power to both solenoids
Paul, yes that’s how it works. With no power on the solenoids the open one let’s salt water in and the closed one keeps freshwater out. Throwing the switch provides power to both solenoids
|
By
David Wallace
·
#48828
·
|
|
Re: Remote two way valve for flushing the water maker
Paul on SM#259 SY Kerpa
By
Paul Osterberg
·
#48827
·
|
|
Re: 24v alternator pulley
Nick,
Apparently Amel wasn't happy with the install of the 175 amp alternator on the first 54s either. They later changed the alternator to a 110 amp Mastervolt. If possible, you should look at a
Nick,
Apparently Amel wasn't happy with the install of the 175 amp alternator on the first 54s either. They later changed the alternator to a 110 amp Mastervolt. If possible, you should look at a
|
By
CW Bill Rouse
·
#48826
·
|
|
Re: tb/BRISBANE area marina & yard/AYOG
Hi Tuen, I’ll be at home in Sydney until late April then back to Stella, currently in Scotland. Ping me on here or private email if you are heading this way before April. Cheers Dean
X
Hi Tuen, I’ll be at home in Sydney until late April then back to Stella, currently in Scotland. Ping me on here or private email if you are heading this way before April. Cheers Dean
X
|
By
Dean Gillies <dean@...>
·
#48825
·
|
|
Re: seals orientation
HI Jose,
How many hours do you have on the seals, and what type of grease did you use
on them?
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
HI Jose,
How many hours do you have on the seals, and what type of grease did you use
on them?
Fair Winds
Eric
Kimberlite Amel Super Maramu #376
|
By
eric freedman
·
#48824
·
|
|
Re: seals orientation
Craig
Still pristine and constant oil level
Jose
Ipanema
Sm278
Craig
Still pristine and constant oil level
Jose
Ipanema
Sm278
|
By
Jose Venegas
·
#48823
·
|
|
Re: 24v alternator pulley
Hello Nick,
We have the Leece Neville alternator with a smart reg on Elyse ...twin belt pulley...and no dust...and the belts are fine after years.
Previous experience with this leads me to believe
Hello Nick,
We have the Leece Neville alternator with a smart reg on Elyse ...twin belt pulley...and no dust...and the belts are fine after years.
Previous experience with this leads me to believe
|
By
Alan Leslie
·
#48822
·
|
|
Re: Latest RigRite.com Goiot Tradition Prices 2019!
Hi Charles
Fantastic work and yes please. I don't need much as a repair but if you have sets that aren't costing much I may replace them all to match. My email address is andyeaves@... to note if you
Hi Charles
Fantastic work and yes please. I don't need much as a repair but if you have sets that aren't costing much I may replace them all to match. My email address is andyeaves@... to note if you
|
By
Andrew Eaves <andyeaves@...>
·
#48821
·
|
|
Re: Engine Water leakage
Hi LO,
Your mechanic's educated guess could be correct, but not necessarily so. As I noted this could simply be a leaking freeze plug. I've had both and they are identical in appearance, that is, both
Hi LO,
Your mechanic's educated guess could be correct, but not necessarily so. As I noted this could simply be a leaking freeze plug. I've had both and they are identical in appearance, that is, both
|
By
Craig Briggs
·
#48820
·
|
|
Re: 24v alternator pulley
Nick,
High output alternators and their pulleys can run pretty hot even when properly set up which seems to be a big factor in the dust problem and the early failure. With twin belts it is of
Nick,
High output alternators and their pulleys can run pretty hot even when properly set up which seems to be a big factor in the dust problem and the early failure. With twin belts it is of
|
By
James Alton
·
#48819
·
|
|
Re: 24v alternator pulley
I have a new engine and 24v alternator with the belt. Still new so far am pleased with the set up.
Sent from Yahoo7 Mail on Android
I have a new engine and 24v alternator with the belt. Still new so far am pleased with the set up.
Sent from Yahoo7 Mail on Android
|
By
michael winand
·
#48818
·
|
|
24v alternator pulley
I am still not completely happy with the 24v 175A alternator installation on Amelia.
There is belt dust that is annoying, and they do not last very long.
I have checked the alignment and it is
I am still not completely happy with the 24v 175A alternator installation on Amelia.
There is belt dust that is annoying, and they do not last very long.
I have checked the alignment and it is
|
By
ngtnewington Newington
·
#48817
·
|
|
Re: Engine Water leackage
As bitter as as can...
However, Mechanic suggested leak from fresh water pump (must be right as leakage is from the back (under the timing) + leakage from oil gasket in the same area - made a lot of
As bitter as as can...
However, Mechanic suggested leak from fresh water pump (must be right as leakage is from the back (under the timing) + leakage from oil gasket in the same area - made a lot of
|
By
Santorin LO
·
#48816
·
|
|
Re: tb/BRISBANE area marina & yard/AYOG
Hi Matt,
Thanks for the suggestion but, in all honesty, except for this forum I avoid any social media as I am looking for qualified advice😊.
Have gotten real, real helpful feedback so far
Hi Matt,
Thanks for the suggestion but, in all honesty, except for this forum I avoid any social media as I am looking for qualified advice😊.
Have gotten real, real helpful feedback so far
|
By
Teun BAAS
·
#48815
·
|
|
Re: tb/BRISBANE area marina & yard/AYOG
Hi Dean,
Sydney – very possible but not before I have done maintenance & back in the water next year.
Would really like meeting and discussing our boats😊.
Best Regards Teun
SV AMELIT
Hi Dean,
Sydney – very possible but not before I have done maintenance & back in the water next year.
Would really like meeting and discussing our boats😊.
Best Regards Teun
SV AMELIT
|
By
Teun BAAS
·
#48814
·
|