Hi Eric. Sorry, I thought I posted pics. I am going to the boat today, will post some pics Tonite or tomorrow. It is similar to your old install/refit, but Kristy has a step attached to the cockpit

One solution is to take them to a machine shop and have them duplicated. This is what I would do. Bill

Good morning, As proud new caretakers of our Maramu we're in the process of learning all about her and of course replacing some parts that have served their time. In this process we have found that

We have the 35 kg Ultra fitted in 2015. We are very pleased with it as we sail constantly ever since. Kind regards, Jean-Pierre Germain, SY Eleuthera, SM007, NZ

I bought the 35 kg and it fitted the SM roller well without modification. I have had it for almost 2 years with excellent results. José Ipanema SM278 Santa Marta Colombia

Hello Jarek. After much thinking I finally got a 45 kg Ultra after summer. I had some trouble fitting it into the bow roller, but with a slight modification I got it in its place. I am happy with it.

Hello, I am in a process of replacing my anchor and strongly consider ULTRA (45 or 35). I like to ask if anybody had already experience with ULTRA and how does it fit to the standard AMEL SM bow

Look at plasticsupply.com or national supply they both have a large assortments of marine holding tanks. MARAMU sn 179

Phillippe, I couldn't find it in the Bonar product catalogue. Are there some other categories I should look for? Greg Shea Sharki 133 Cap des Iles Preveza

I would think you should be good with the gearbox you have. Any issues would have surfaced by 1200hrs. If you have it reconditioned for peace of mind,do so. I would check the running temperature, to

Hi Kent, How did you make out with the brackets to hold up the intercooler? Do you have the 24 volt 175 amp alternator on your Yanmar? Fair Winds Eric Kimberlite Amel Super Maramu #376

Hey Sarah and Trevor Similar to Jim Watkins reply our holding tank is located behind the cupboard trim in the front head. It is a simple installation custom made from 316 s/s and fitted with a 'full'

many thanks

The tank was made by BONAR Plastics http://www.bonarplastics.com/ …. Philippe De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de Gregory Shea Envoyé :

Does anyone know where you can buy the tanks shown in Phillipe's post. I have one of those tanks and wanted to replace it but the only retail source I could find was Accastillage Diffusion.

You can see two differents solutions, and the way to install (but in french) Fair winds Philippe De : main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] De la part de Sarah

Ken, When the drain pump failed on the original Austrail Clothes washer I bought one here: https://www.espares.co.uk/search?SearchTerm=dishwasher%20pump I was lucky in that I matched what I thought

Bernd, The best advice you can find was just given to you by Craig Briggs, who owns a Santorin like yours. You can contact ACMO at www.ACMO.fr or Laetitia Boudon <laetitia@...>, +33 03 81 35 70 86.

This would be really useful, Thank you so much 😀😀 Sarah & Trev

I actually have a schematic of a holding tank designed by Amel. When I get home from work, I would gladly post it . The tank should fit both Sharki's & Maramu's since the forward head are about the