Is it too late for dinner? Vickers and I would to join you. Aras & Vickers -- Aras Grinius SV FIASCO Sharki #163

Hi Jose, Please send me your email address to Kimberlite@... Thanks Eric

Hi Jose, This is probably the third time in 11 years I have done an in water, between haul-out lip seal replacement. Just routine. As soon as I see a trace of water I act. Hasn't happened too often

Hi Danny, Good luck with your seal. It could have been a bad seal but it is also possible that the shaft is no longer lined up and over time the seals get deformed and looses its lip tension. At

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. File: Stella Instrumentation Diagram

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. File: Stella Instrumentation Diagram April

I have also taken this approach with a machine shop Interested to know how people approached it as originally if was an interference fit How did you reassemble the disk onto the pin? As a temp

Hi Tom, You mention "Getting them (the swivels) out of the mast is the work". I'm at this point. Would you kindly describe the steps you took to remove the pinion as that appears to be the final

Yes, but in my experience the 20 meter standard cable length is not quite long enough to get to the B&G junction box, and there is very little difference in the 213 Masthead Mount with 20m of cable

Hi Oliver, the AMEL 54 main mast length is 18.50 m. Olivier

Oliver, The transducer is a B&G 213MHU and is available from https://www.aandtinstruments.com/ The transducer is repairable and parts are available The transducer is connected to the B&G 213 Mount

Hi Jose Sounds a good system. So far the standard amel seals have done the job for me. I have just done an in water lip seal change I always carry a spare. A slight leak had developed on the sail

Vickers and I will also be around the boat show. Since we’re locals if anybody needs questions answered let us know. Aras & Vickers S/v Fiasco -- Aras Grinius SV FIASCO Sharki #163

Hello, I need to fit a new wind transducer ontop of my mast. For the cable length I will need the length of the mast from deck to masttop not incl. Antennas. Does anybody know it? Oliver

We r just going to build a winter enclosure. Any hints that we should care for? Do you have some fotos? Oliver A54#39 Portugal Sent from my Huawei Mobile

Hello, We got 1 fridge and freezer in our boat, we gave the freezer in the pantry a complete refit. 1. Step is to refit AMEL freezer insulations. We removed the complete old imsulation. Sorry to say

You could look at Southwest Sails in Turkey. The PO of our SM had a full enclosure made there 6 or more years ago, still looks and works beautifully. You could call it a winter enclosure in that every

Hi Jose, What is your email address? Fair Winds Eric Kimberlite Amel Super Maramu #376

Safe Travels Colin. We’d be heading to NC today but we have Chara on the market and there is supposed to be someone coming to look at this weekend. Bob

Hey Bob So sorry we missed you guys. We are just reversing out and noticed your email. The other two Amels are still here tonight, you should all get together. Best regards Colin & Lauren