Raif was the man that I negotiated with and had manage my project, he was so very professional and precise, I recommend him highly and also is one of the best contractors Ive used, he has lots of

There is also a Maranu at Vuda Marina...S/V Chara. Glad to see si many Amelia here. Bob

Hi Nick, I second the recommendation on Lantana. The shop in Marmaris is run by Naile +90 532 511 67 27 . Her brother, Raif Sağlam +382 63 443 205 is now based in Tivat, Montenegro which is closer

Just got notice that Cascais has room for Kincsem. Many thanks for everyone’s advice. Maybe Jose you did something to make this happen? Many thanks!! Joerg Esdorn A55 Kincsem

Hi all, We are selling our Deme Voiles gennaker (100 square meters) and Facnor FX4500 furler. It's in good shape and has only a few small stains which can probably be removed. It's a great sail and

We had a similar problem with our GP-150. The errors showed up right as we left Las Palmas to cross the pond! I called Furuno and they suggested that we check all of the connections as the head unit

I found another spare part in my boat that I won't need, but may be of use to someone: Onan 149-2513 It's a fuel filter for the following models: ONAN HDKCC HDKAH HDKAJ HDKAK HDKAU HDKAT HDKAV Again,

Oliver, Could you tell us more about upgrading/replacing the freezer insulation? I assume you mean the one under the settee? Did you scrape off all the old insulation and replace? What model vacuum

I just went through this same saga. I purchased what I though were the 512A pumps, which Frigoboat actually rebrands and also sells as their own. Penguin Refrigeration UK advertised those on their

Oliver, Which make and model of pump did you replace OEM with? Best, CW Bill Rouse Amel Yacht Owners School - www.YachtSchool.us 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970

Hi S&T, Funny you mention this now. I have been using the Flojet pumps as recommended/supplied by Frigoboat. Those are actually 24 volt versions running on 12 Volt to lower the Amp-draw and extend the

Thanks Dean That’s helpful in developing my understanding, as you say. In fact it turned out the AIS issue was compounded by an intermittent power drop out with the router which we identified on

Fantastic to finally meet today Danny, after 8 years of chatting on this forum! What a pleasure to get the two Pacific Amels (Island Pearl II and Ocean Pearl) together at last, and also Amel Ying Yang

I recommend you check price and precise material, time lines, completion dates and supervise the work, they can be good but there has been many bad experiences. Regards Paul - Fortuna II 55/17

Thanks guys, very useful information. Looks like Marmaris is the place to go. Nick

Hello guys! We replaced the pump motor by an brushless motor. We had similar lifespan and shorter. Additional the original pump wasted lots of energy in wear. We also changed the insulation of the

Pat and Diane, Everyone wants to be near you! ~~~⛵️~~~Matt

We’re in! May be a minute or 5 late, as I am helping a friend work his booth at the show. ~~~⛵️~~~Matt

Hello We have flojet 32601 -0092 Quad series pump r4105512a. ( 12v, 1.5 A max, 1.6 gpm 6.1 lpm, 50 psi 3.4 max) installed onboard as circulation pump for fridges/freezer. They are relatively easy

Hi all, Scott, thanks a lot for your write up, I’ve just caught up on some of the forum topics after weeks offline and it’s a great source of info for the group. I’d like to add some info to