In addition to the other meet-ups around the Annapolis Boat show, we will be hosting an "open boat" onboard Harmonie SM160 from 4 to 8PM on Saturday Oct 12. We are docked at Burt Jabin's Yacht Yard,

Joerg, We stayed in the Cascais marina last year, and there was a fairly large anchorage just outside the entrance. I have no knowledge of the holding, but there were some large boats there. John

We are on our way up the West Coast of Portugal and would like to stay in Lisbon for 10 days beginning September 25 or 26. We’ve been unable to make a reservation at Cascais or any of the other

Dear Nick, I was in contact with a friend 5 minutes ago sailing in Turkey. There is schwarzewolke.com and the attached business cards from 3 others working well in Marmaris. Kind regards Arnold SY

Hello fellow Amel owners, I am thinking of getting some upholstery and canvas work done for Amelia. Specifically I want to replace the saloon cushions and covers. The foam itself is beginning to

Charles, Initially I reserved a table for 8 then 12 and a couple of days ago called and asked if we could get a table for 16 . We now have 15 coming ,so I guess we can squeeze in 17 ,so please join

We are in and my girlfriend's name is Mie (pronounced Mia). Thanks for setting this up! -- Scott 2007 A54 #69 SV Tengah http://www.svtengah.com

Hello Pat, We will also be at the show and would like to join the group for dinner if there is space enough for the two of us. Thank you, Charles & Hae SV Jupiter Mango #29

Hi Wolfgang, I noticed exactly the same problem when I bought Stella. I’m pretty sure that my system was configured as original from Amel. (Previous owner did not change anything). I cannot find

Hi Tony, The Navnet3D system has a failover action with GPS that I’ve observed, which may be relevant to your problem. Typically there is more than one GPS data source available in a system. In my

Wolfgang, Maybe it is as simple as needing calibration. I would pull the manual and try that first. Good luck. --

Bill, thank you. TWS, AWS , speed etc is working perfect. I only wondered why the point True Winddirection is always on 000 M. Wolfgang

Thank you, look forward to it Get Outlook for iOS

Hi Vic, One of our very clever crew members found a great spot for it. Kelly built a sturdy mounting board with rubber feet and then the other crew member lashed the whole assembly to the mizzen

Alan, I was able to increase the table size ,so you and another couple could join us. Se Ya There, Pat&Diane SM Shenanigans

Hello Mark, I got your private e-mail too. The grease originally put in the manual furler (mainsail or mizzen) is silicone grease, rather sticky and water resistant. The furler is rather resistant to

It could also be your heading sensor. Heading is also part of the calculation. --

Don't leave home without it😀 From my book: -- CW Bill

Wolfgang, Is your boat speed working and the boat moving when you are checking this? Speed is a required field in the calculation performed by the Hydra. Normally when an Amel has issues with TWS or

Hi Pat, sorry for the late notice but Laura & I would like to join in if possible Regards Alan &Laura Grayson SM 406 “Ora Pai” Get Outlook for iOS