Hi Dan. I see you are SM#116 and looking at Bonfiglioli gearbox. We are Hull #240 with Leroy Somer MVA M33 gearbox but the reduction ratio should hold true depending on motor speed. Ours is 1:60

Mark, Can you provide the model number and company you purchased it from for the Bonfiglioli MVF44. Also, what does the gear ratio for the main furler and outhaul furler need to be? There are many

We're in the market for a serviceable Genoa to have onboard as a backup on our SM2K. Please email me if you have an extra one hanging around. russ "dot" roberts "dot" va "at" gee-mail "dot"

Thanks Joerg I have no choice but to install it, otherwise the admiral has me peeling potatoes as well as washing up Regards Paul

Hello AMELians, could someone provide the color numbers for a SM2K Redline for the white hull, the red water line and the red stripes at the top of the hull at the side. Thanks so much :-) Fair

For what it's worth, the aircon system on our Amel 50 is AMAZING! It is very quiet and works perfectly. The central chiller unit is in the engine room. If you can convert to it, in my opinion, it

Bill, hi Thank you very much for your opinion but I would like to detail the situation further and request your re-examination The Amel 50 and 60 currently come equipped with a central chiller system

No it replaces two drawers - no 2 and 3 from top. I haven’t installed it - still thinking about it. Joerg

Type 2 for both Genoa and staysail. Joerg Esdorn A55 #53 Kincsem

Thank you Joerg Did you install this to your 55 and if so what location? In the early 55 model they installed a top-loader Regards Paul

Although I can find nothing on Amel specifications, I believe that you will find that the Reckmann EF series comes in 3 sizes: EF-90, EF90-2, and EF90-3 and that the Reckmann EF-90 is installed on the

Hi Paul, this is the unit Amel installs now. BOSCH SKT 5102. Let me know how you like it!! joerg Esdorn A55#53 Kincsem currently in Sevilla

Question for the group. What is the size of the Reckman EF90 Genoa electric furler in the AMEL 55? I have been told it would be either a 2 or a 3, but which one? Aldo AMEL 55 Hull 36

Hi Kent, Thanks Eric Kimberlite Amel Super Maramu #376

I ordered from Amel, I haven’t received it yet, but Maud had several kinds. I described what was originally installed and she said she’d send what appears to be the same. It’s a D with all the

Hi Kent, What gasket did you find for this job? Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi, There are a number of insertion rubbers available made of different rubbers. What type did you use? What thickness did you use for the diaphragm and the flapper valves? Fair

hello all, I’m wanting to install a top loading dishwasher back into the counter space of my 55 and would like to know what is the best model and the experience that other owners have had with the

I had too CLIMA units that were noisey which was only the fan unit vibrating and rattling, I used some gentle persuading to some areas of the frame which stopped the issue, they all run acceptably

Hi, in the absence of a kit to hand I made copies of the flap valves out of thick insertion rubber. This a fibre reinforced rubber sheet. I found the replacements tended to take a curve and not seal