|
Re: Mast foot rubber seal pad
Hi Ruedi,
Strange answer you have got from Amel as the crew in Martinique has even build a special rig to replace the pad with a standing mast. It is meant to dampen the forces of the mast on the deck
Hi Ruedi,
Strange answer you have got from Amel as the crew in Martinique has even build a special rig to replace the pad with a standing mast. It is meant to dampen the forces of the mast on the deck
|
By
Arno Luijten
·
#47980
·
|
|
Re: Mast foot rubber seal pad
Hi Ruedi,
The pad under my mast is pretty feeble and crumbly. I have scraped it out and regularly blast it with fresh water. It is barely visible now. As for the rig tension, to my eye the main mast
Hi Ruedi,
The pad under my mast is pretty feeble and crumbly. I have scraped it out and regularly blast it with fresh water. It is barely visible now. As for the rig tension, to my eye the main mast
|
By
ngtnewington Newington
·
#47979
·
|
|
Re: Mast foot rubber seal pad
Hi Ruedi
If the leak you areworried about is water getting inside the boat, then don’t. This pad is notintended to seal that.
It is madeout of PU (polyurethane), 90 SH (“hardness”), 5 mm
Hi Ruedi
If the leak you areworried about is water getting inside the boat, then don’t. This pad is notintended to seal that.
It is madeout of PU (polyurethane), 90 SH (“hardness”), 5 mm
|
By
Roque
·
#47978
·
|
|
Re: Amel OEM Rigging
I just get new shrouds here in Kalamata, Greece, manufactured by a shop in Athen, Greece and fitted by the sailmaker here. For the Sharki the total is 2800,- Euro.
--
Gerhard Mueller
Amel Sharki
I just get new shrouds here in Kalamata, Greece, manufactured by a shop in Athen, Greece and fitted by the sailmaker here. For the Sharki the total is 2800,- Euro.
--
Gerhard Mueller
Amel Sharki
|
By
Gerhard Mueller
·
#47977
·
|
|
Re: OG Maramu Mizzen Sheet Cars
Dennis is correct.
No problem to order a machine shop for a new disk. Often the pin is still OK.
I have changed all disks.
--
Gerhard Mueller
Amel Sharki #60
Currently Kalamata, Greece
Dennis is correct.
No problem to order a machine shop for a new disk. Often the pin is still OK.
I have changed all disks.
--
Gerhard Mueller
Amel Sharki #60
Currently Kalamata, Greece
|
By
Gerhard Mueller
·
#47976
·
|
|
Re: OG Maramu Mizzen Sheet Cars
Hi Jeremy,
I had a failure just like yours and it was no problem and not very expensive to have a machine shop produce a new disk and pin.
Dennis
Libertad
Maramu #121
Hi Jeremy,
I had a failure just like yours and it was no problem and not very expensive to have a machine shop produce a new disk and pin.
Dennis
Libertad
Maramu #121
|
By
sbmesasailor
·
#47975
·
|
|
Re: Re :[AmelYachtOwners] OG Maramu Mizzen Sheet Cars
Don Green has a business of making sheaves and rebuilding Genoa cars and blocks.
You can find him on FaceBook and the Sailing and Cruising Page.
~~~⛵️~~~Matt
Don Green has a business of making sheaves and rebuilding Genoa cars and blocks.
You can find him on FaceBook and the Sailing and Cruising Page.
~~~⛵️~~~Matt
|
By
Matt Salatino
·
#47974
·
|
|
Re: Free or Tie-on the steering wheel
Hi Ruedi,
The best is to fix it, but if you fix it it MUST be without any gap (possibility that the rude can move) ... else do not fix it ...
JLMERTZ
CottonBay
Hi Ruedi,
The best is to fix it, but if you fix it it MUST be without any gap (possibility that the rude can move) ... else do not fix it ...
JLMERTZ
CottonBay
|
By
jlm@jlmertz.fr
·
#47973
·
|
|
Re: Amel OEM Rigging
Hi,
In France with our President Emmanuel Macron we are Champion in the World for Taxes and Taxes and Taxes !
Le 18/09/2019 à 11:51, Eric Meury a écrit :
Hi,
In France with our President Emmanuel Macron we are Champion in the World for Taxes and Taxes and Taxes !
Le 18/09/2019 à 11:51, Eric Meury a écrit :
|
By
jlm@jlmertz.fr
·
#47972
·
|
|
Free or Tie-on the steering wheel
Dear Amel'ias
I’m curious about experience with tie on the steering wheel and maybe someone has a proven technical answer.
When I’m on Anchor or in a Marina I always fix/tie the steering wheel
Dear Amel'ias
I’m curious about experience with tie on the steering wheel and maybe someone has a proven technical answer.
When I’m on Anchor or in a Marina I always fix/tie the steering wheel
|
By
Rudolf Waldispuehl
·
#47971
·
|
|
Amel OEM Rigging
hello.
I just got the quote for new rigging from ACMO. Background. my boat is an Amel Santorin. Ketch. Boat is in Georgia USA. The quote i received is for 6197 Euro for the parts plus 684 TPF
hello.
I just got the quote for new rigging from ACMO. Background. my boat is an Amel Santorin. Ketch. Boat is in Georgia USA. The quote i received is for 6197 Euro for the parts plus 684 TPF
|
By
Eric Meury
·
#47970
·
|
|
Mast foot rubber seal pad
Hi Folks
The mast foot rubber pad on my boat is quite brown and very brittle. I’m a bit nervous that it will leak one day (see pictures).
I heard from Barry “Lady Penelope II” that he changed
Hi Folks
The mast foot rubber pad on my boat is quite brown and very brittle. I’m a bit nervous that it will leak one day (see pictures).
I heard from Barry “Lady Penelope II” that he changed
|
By
Rudolf Waldispuehl
·
#47969
·
|
|
Bow Thruster
Hello
I lost the bottom of my bow thruster on my Sm 2000
Why I don't know. I am currently in Berlin and would like to make a new one. I will be back in Tahiti on the 30. Can someone tell me the
Hello
I lost the bottom of my bow thruster on my Sm 2000
Why I don't know. I am currently in Berlin and would like to make a new one. I will be back in Tahiti on the 30. Can someone tell me the
|
By
heinz@quetzal.berlin
·
#47968
·
|
|
Re :[AmelYachtOwners] OG Maramu Mizzen Sheet Cars
Good day to you,
Try rigrite.com (Rig-rite Inc.)
They are the experts on vintage rigging (goiot incld) & their catalog is well documented.
I need to replace my travelers also & will send them a
Good day to you,
Try rigrite.com (Rig-rite Inc.)
They are the experts on vintage rigging (goiot incld) & their catalog is well documented.
I need to replace my travelers also & will send them a
|
By
christian alby <calbyy@...>
·
#47967
·
|
|
Re: OG Maramu Mizzen Sheet Cars
He Jeremie ,
I is from Goiot , i look for some 10 yaers ago for my Amel Eiros 39 but it was for me not possible to find .
Good luck Elja
SM Balu
Von meinem iPhone gesendet
He Jeremie ,
I is from Goiot , i look for some 10 yaers ago for my Amel Eiros 39 but it was for me not possible to find .
Good luck Elja
SM Balu
Von meinem iPhone gesendet
|
By
Elja Röllinghoff Balu SM 222
·
#47966
·
|
|
OG Maramu Mizzen Sheet Cars
Hey there!
One of my Mizzen Sheet Cars has died on me - the center disk just shattered when using it last sail.
its a odd ‘Y’ shaped track and any replacement or part advice would be awesome!
--
Hey there!
One of my Mizzen Sheet Cars has died on me - the center disk just shattered when using it last sail.
its a odd ‘Y’ shaped track and any replacement or part advice would be awesome!
--
|
By
mr_hermanns
·
#47965
·
|
|
Re: headsail furler locking pin.
Thank you Olivier, I appreciate your knowledgeable input.
Kind Regards
Danny
Thank you Olivier, I appreciate your knowledgeable input.
Kind Regards
Danny
|
By
Danny and Yvonne SIMMS
·
#47964
·
|
|
Re: Color number for SM2K Redline
You might want to think about AwlGrip Desert Sand, which is the new trim color for Amels since the introduction of the 55.
--
You might want to think about AwlGrip Desert Sand, which is the new trim color for Amels since the introduction of the 55.
--
|
By
CW Bill Rouse
·
#47963
·
|
|
Re: headsail furler locking pin.
Hello Danny,
the type of locking pin you have is bolted into the aluminum sheave. The hole in the aluminum is tapped and the stainless steel unit is threaded. It is originally mounted with hard
Hello Danny,
the type of locking pin you have is bolted into the aluminum sheave. The hole in the aluminum is tapped and the stainless steel unit is threaded. It is originally mounted with hard
|
By
Beaute Olivier
·
#47962
·
|
|
Re: Soda Blasting of underwater GPR Area.
I believe they use crushed walnut shells as the medium, not sand. Whatever it is, isn’t abrasive enough to penetrate the gelcoat. Careful selection of blasting media is important.......or you’re
I believe they use crushed walnut shells as the medium, not sand. Whatever it is, isn’t abrasive enough to penetrate the gelcoat. Careful selection of blasting media is important.......or you’re
|
By
Matt Salatino
·
#47961
·
|