Id like to add an inner stay to my 1977 meltem53.ive seen some close to each other and others about foot or two apart .what is the significance.

Where do you emptying the black water tanks,the toilets are backed up

Hi All, The thing that was niggling me was the fact that there was no voltage across the Active-Neutral terminals of the pump when I checked. Monitoring the terminal voltage I have checked whether

That’s an impressive blow out Jose! At least you know what is wrong very easily 😜

Scott, sorry for the delay but here are pics of the clean up tackle for the runners and the extension for the runners, as supplied by Amel. Works excellent.

Hi Dean, On my 54?I have to get the pump going with flat screwdriver on the shaft at the aft end there is a hole in the fan covering. Mine makes a hum but does not turn without a little

good day to all, my Freezer is a ‘frigoboat’ with its controller being ‘Carel IR33’ and yesterday just stopped working with no warning except the controller displayed ‘1’ If anyone can

Bernd, This is a LofransTigres windlass. Parts are readily available worldwide. https://www.lofrans.com/spare-parts The buttons arean Amel add-on and are available from Amel or from

All, I am mostly finished with recommended assortments/bundles including the required peripheral devices. I have selected a Preferred Vendor for the US & Canada and another for the UK and Europe. I am

The Winsh is a lofranz Tiger Look by svb there you find any spareparts Von meinem iPhone gesendet

Hi, another one. I need to service my windlass and especially the up/down switches which have gone with the sun n salt. Unfortunately I have no idea what’s the name/model of mine. It looks very

Dean Check the capacitor!..... I have 3 capacitors blow out this summer. One of them with no exterior signs of fail Jose Alegria Amel55 #03-MERIT +351918663037 Josealegr@... No dia 30/08/2019, às

Hi Dean Understand, - try to turn multiple time with screwdriver, - back and forward. I had to do it after the winter season for 1-2 minutes. This summer I used my AC every few weeks and no problem

Hi Olivier and Ruedi, Sorry I should have said that I did spin with a screwdriver, and the spindle runs freely. Now that I know that the pump should start immediately, that is very helpful. It seems

Hi the problem was the upper shaft seal. The correct size for a Super Maramu is 60-90-8 (not -10). This was difficult to fix. Due to rusting together of parts inside the coupling, the old part with

Hi Dean The Pump should start after the Aircon Blower starts, also without having the temp on low (means without compressor). At leased on my Boat. It happens to me as well after long period of not

Hello Dean, first, did you try to turn the pump shaft manually (thanks to a flat screw driver at the backside of the pump, where the fan is located)? After several months of non use, the bronze

Hi gang, I just fired up my AC (not used at all this year!), because I want to make sure I can put antifreeze through the system. My Calpeda seawater pump is not running, and I’m wondering why?

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. File: Dryer Minea Removal Amel

Paul, Cara is a 2004 Super Maramu with 1885 hours on the engine. The rubber on the rear mounts were completely shot. -- Mark McGovern SM #440 Cara Deale, MD USA