We’re in! May be a minute or 5 late, as I am helping a friend work his booth at the show. ~~~⛵️~~~Matt

Hello We have flojet 32601 -0092 Quad series pump r4105512a. ( 12v, 1.5 A max, 1.6 gpm 6.1 lpm, 50 psi 3.4 max) installed onboard as circulation pump for fridges/freezer. They are relatively easy

Hi all, Scott, thanks a lot for your write up, I’ve just caught up on some of the forum topics after weeks offline and it’s a great source of info for the group. I’d like to add some info to

Nicely done, Gary! Congrats. Thanks for taking the time. Roque Attika A54 #117 Paraty Em dom, 22 de set de 2019 às 10:56, Mark McGovern <mfmcgovern@...> escreveu:

Gary, Perfect timing! This is next on my To Do list after rebuilding the Main Furler. Thank you! -- Mark McGovern SM #440 Cara Deale, MD USA

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the main@AmelYachtOwners.groups.io group. File: Amel – Super Maramu 2000 – Mizzen

Thanks I am aware of the anchorage and that’s where I am headed if I don’t find a berth somewhere. Jose, thanks for the offer but if you don’t have a permanent berth in Cascais, There is no

Thanks very much for the responses. I am waitlisted at cascais, Oreias and Parque Naciones marinas but I was hoping someone had a permanent berth anywhere in Lisbon and was not using it currently.

Hi Colin. We are in Sawini Bay tonight, in Vuda Marina tomorrow. The Pearls may meet at last. Danny Sm 299 Ocean Pearl

Thanks Bill We have the correct official sample of AwlGrip Desert Sand here at Vuda Point. As you know the painters in Durban got the "Desert Sand" colour wrong on our new hull side stripe when we

The picture seems to have dropped off my previous message. Here it is again.

Wolfgang, The picture here shows the configuration I have currently on Stella. The heading data from PG500 is received by the master MFD on data port 3. I have connected port 2 output to the Hydra to

There are 8 NIB voltage regulator regulators (model 8RL3021 105-351 new in box) , presently available on eBay https://www.ebay.com/p/18020353785 . Although they are listed at $29 but they did accept

An Amel takeover. Danny

Hello Nick, I had a refit completed to a catamaran 60 foot by Lantana Canvas family in Marmaris and Gocek in 2017, they did 16,000 euros of work from couches, covers, bedding and awnings etc, I was

Hi Nick; One of the best upholstery guys we have run into is a guy by the name of Ebrahim in Didim Turkey. He made a full winter cover for us in 3 pieces that has held up as new after 5 seasons of use

Joerg hi john is right Cascais anchorage is excellent, the bottom is sandy, very good and i spent there dozens of weekends. It will be uncomfortable with southwest winds, but the Cascais marina when

Joerg hi Next Monday I will try my best at Oeiras or Cascais marinas. Keep in touch José Alegria A55#003MERIT josealegr@... Mobile: + 351 91 866 30 37

In addition to the other meet-ups around the Annapolis Boat show, we will be hosting an "open boat" onboard Harmonie SM160 from 4 to 8PM on Saturday Oct 12. We are docked at Burt Jabin's Yacht Yard,

Joerg, We stayed in the Cascais marina last year, and there was a fairly large anchorage just outside the entrance. I have no knowledge of the holding, but there were some large boats there. John