Hello fellow Amel owners, I am thinking of getting some upholstery and canvas work done for Amelia. Specifically I want to replace the saloon cushions and covers. The foam itself is beginning to

Charles, Initially I reserved a table for 8 then 12 and a couple of days ago called and asked if we could get a table for 16 . We now have 15 coming ,so I guess we can squeeze in 17 ,so please join

We are in and my girlfriend's name is Mie (pronounced Mia). Thanks for setting this up! -- Scott 2007 A54 #69 SV Tengah http://www.svtengah.com

Hello Pat, We will also be at the show and would like to join the group for dinner if there is space enough for the two of us. Thank you, Charles & Hae SV Jupiter Mango #29

Hi Wolfgang, I noticed exactly the same problem when I bought Stella. I’m pretty sure that my system was configured as original from Amel. (Previous owner did not change anything). I cannot find

Hi Tony, The Navnet3D system has a failover action with GPS that I’ve observed, which may be relevant to your problem. Typically there is more than one GPS data source available in a system. In my

Wolfgang, Maybe it is as simple as needing calibration. I would pull the manual and try that first. Good luck. --

Bill, thank you. TWS, AWS , speed etc is working perfect. I only wondered why the point True Winddirection is always on 000 M. Wolfgang

Thank you, look forward to it Get Outlook for iOS

Hi Vic, One of our very clever crew members found a great spot for it. Kelly built a sturdy mounting board with rubber feet and then the other crew member lashed the whole assembly to the mizzen

Alan, I was able to increase the table size ,so you and another couple could join us. Se Ya There, Pat&Diane SM Shenanigans

Hello Mark, I got your private e-mail too. The grease originally put in the manual furler (mainsail or mizzen) is silicone grease, rather sticky and water resistant. The furler is rather resistant to

It could also be your heading sensor. Heading is also part of the calculation. --

Don't leave home without it😀 From my book: -- CW Bill

Wolfgang, Is your boat speed working and the boat moving when you are checking this? Speed is a required field in the calculation performed by the Hydra. Normally when an Amel has issues with TWS or

Hi Pat, sorry for the late notice but Laura & I would like to join in if possible Regards Alan &Laura Grayson SM 406 “Ora Pai” Get Outlook for iOS

Hi to the group, My B&G HYDRA 3000 does not display True wind direction =shows 000.If I look through the setup headingsource is 016 - which I think is wrong. Before I try to test I ask the group. B&G

Hi All Grateful for your thoughts: 1. My 2008 A54 #102 has the Furuno GPS Navigator GP-150. It’s recently started sounding an intermittent No GPS alarm and, more frequently, a DOP Error alarm. It

-- CW Bill Rouse Amel Yacht Owners School

Bill, I think some of the confusion has actually come from Amel. Alan Grayson of Ora Pai (SM #406) recently rebuilt his Main Furler Assembly with parts from Amel. They sent him a parts list that