Hallo Joerg and all Amelians, I have read with much interest your description of your way of using the parasailor on your 55. I have a Santorini with my man Dietmar; we are thinking about buying a

Really considering this Scott, I’d love to see a write up. Do you have the duo or the 230/50hz only dessalator? Very tempting I must say. This and a little wind generator and I think with our 3

No doubt it is... The usual stainless vs aluminium. The issue is that the rod is dead ended so it can't be knocked out....there's nothing to get a grip on to pull it either. Alan Elyse SM 437

Hi Kent, It is worth it to get it from Amel, It is precut and fits perfectly. Order 2 sets and a spare packing nut. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi, I believe I counted 4 errors on Delos series 205. How many did you get?? Fair Winds Eric Kimberlite Amel Super Maramu #376

Is it corroded? Stainless Steel in Aluminum? ~~~⛵️~~~Matt

It appears the new Amel 60 is going with 720ah of lithium batteries and as a result getting an electric oven and induction cooking. https://www.wilkinsonmarine.com/store/p115/AMEL_60.html Thoughts? As

I think that if a thief ashore were to see a dinghy with T/TVessel Name on it and took off to rob a boat (that they have no idea of the anchorlocation but planned to blindly hunt for it) would

AnnSofie, we would like 6 of them. Please ship to Kent Robertson 7025 Thorneton Rd Easton, MD 21601 USA THANK YOU!!! Kent & Iris Kristy SM 243 karkauai@...

I’ll call in the morning. Just to be sure, the height of the original gasket is 1” or 25mm, correct? Kent Robertson S/V Kristy karkauai@... USA cell: 828-234-6819

Paul, the Parasailor is not as easy to launch as my Code Zero on a furler but it's less work than setting the pole. There are two ways to set it. The standard way is using 2 sheets and 2 guys

I need to replace the springs in one of my Antal genoa cars. The springs and block are attached to the car by a stainless rod that runs from fwd to aft and is dead ended at the aft end. There is a

I think the fact there is no tender attached to your boat is enough of a signal, don't you?. Danny' SM 299 Ocean Pearl

Personally, I would never put my boat name on my tender, only the registration number eg. T/T Reg 9999. By doing this you avoid the possibility of someone ashore immediately

Write ”T/T” followed by your boats name on it. T/T = Tender To Hälsningar/regards/cumprimentos Ann-Sofie Svanberg Skickat från min iPhone 4 aug. 2019 kl. 22:39 skrev Mark Erdos <mcerdos@...>:

I will! Hälsningar Ann-Sofie Svanberg Skickat från min iPhone 4 aug. 2019 kl. 23:06 skrev Mark Pitt <mark_pitt@...>:

Alex, In the USA, yourUSA cruising permit does not include the dinghy. You are required to have astate registration. The guy did you a favor by not writing you a ticket. It doesn’treally matter

Hi Ann-Sofie, I would like four of these if it is not too much trouble. They can be sent to me at Mark Pitt (S/V Sabbatical III) WICKFORD COVE MARINA 65 REYNOLDS ST NORTH KINGSTOWN, RI

Hi Ann-Sofie Be very grateful if you could buy 2 or 3 and post to me in NZ. let me know price and a bank account number and Ill reimburse you Grateful thanks John Hayes

Dear Amelians, I just head a local constable visiting me, asking for my dinghy registration. He sais any motorized boat has to be registered in the State of N.Y. My AMEL is Swiss registered and