Thanks to all for your suggestions for wheel enhancements. I’m torn between ordering a leather kit from boat leather, versus proceeding along the lines of Annsofie’s decorative braiding. Annsofie,

Thanks Joel great info Courtney s/v Trippin 54 #101 Secret Harbour Grenada 🇬🇩

Thanks Ann Sophie. I vaguely remember that after the composite wheel like the one on your boat was introduced, Amel got about 10 wheels in stainless steel that they forgot to cancel the order on.

We got our replacement from Amel - it even included the leather cover for the wheel hub with a gold embossed "H.Amel" signature on it that was the original design for the SN. Craig Briggs, SN68

To confirm that the metal wheel is changed. This wheel is on S/Y Lady Annila, SM 232 built 1998. Hälsningar Ann-Sofie Svanberg Skickat från min iPhone 6 juli 2019 kl. 12:34 skrev amelforme

If you obtain any of the excellent "mail order" wheel leather kits, there were three distinctly different wheels on the Super Maramu. Two are stainless steel, one is composite. Not sure when the

No such issue on my boat. Joerg Esdorn A55 #53 Kincsem

This is how we did on Lady Annila. This one is to mark ”0” And this is the other two Regards Ann-Sofie on S/Y Lady Annila, SM 232, 1998 Skickat från min iPhone

There is a leather upholstery gentleman near vista mar in Panama. He does surprisingly good work at a very reasonable price. We got steering wheel and new seat etc for 200us. After that then dinghy

Boat Leather is a Preferred Yacht School vendor and they have measurements for SM and 54. Contact Tom Armantrout at Tom"at"BoatLeather.com or 1-206-284-9110 Best, CW Bill Rouse Yacht School

Paul, First I have seen it, but I only have 7 Amel 55 clients, Best, CW Bill Rouse Yacht School (formerly Amel School) - Supporting Amel Owners 720 Winnie St Galveston Island, TX 77550 +1(832)

Hi Tom We replaced ours with a kit from these guys http://boatleather.com/product/boatleather-wheel-covers/ You just need to measure your wheel as they show and order whatever colour you want. The kit

On my Sharki 127 I have the usual stainless tubing support for the strut for the spinnaker pole. The support has a clamp assembly (6 fasteners) on the cap shroud and hides a 120mm length of wire. The

Thomas, Loco Lola IIdid a very nice job using leather paint and reconditioned their wheel cover.Or: https://youtu.be/rnf1EaOZsik With bestregards, Mark Skipper Sailing Vessel-

Hi, Yesterday I saw SY Phantom in Jabin's Yacht Yard in Annapolis. If the owner is on this forum or if someone knows him, I would like to get in touch and discuss his experience with the watt&sea

James, The galvanizer I used said they would have to sandblast if there was paint on it, and they would have an extra charge. I would regalvanize every time if I could, I think my cost was about $250

After several years of appearing “fashionably distressed”, our original wheel leather now just looks distressed. Does anyone have any tips for replacing this? Where might I get leather that would

Thank you so much Bill, do you know if this is a common issue? Regards Paul

Paul, I think it is directly in the middle of the stern. Best, CW Bill Rouse Yacht School (formerly Amel School) - Supporting Amel Owners 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970 (If

Ok Hans, I understand now, I have just completed the bottom maintenance on my 55 and certainly didn’t see any such crack or signs of a such a thing Best of luck and of course hope it’s only in the