|
Re: New York: Registration for motorized dinghy / foreign flagged sailboat
I think that if a thief ashore were to see a dinghy with T/TVessel Name on it and took off to rob a boat (that they have no idea of the anchorlocation but planned to blindly hunt for it) would
I think that if a thief ashore were to see a dinghy with T/TVessel Name on it and took off to rob a boat (that they have no idea of the anchorlocation but planned to blindly hunt for it) would
|
By
Mark Erdos
·
#47137
·
|
|
Re: Goiot parts and seals -Rubber Buttons
AnnSofie, we would like 6 of them. Please ship to
Kent Robertson
7025 Thorneton Rd
Easton, MD 21601 USA
THANK YOU!!!
Kent & Iris
Kristy
SM 243
karkauai@...
AnnSofie, we would like 6 of them. Please ship to
Kent Robertson
7025 Thorneton Rd
Easton, MD 21601 USA
THANK YOU!!!
Kent & Iris
Kristy
SM 243
karkauai@...
|
By
karkauai
·
#47136
·
|
|
Re: [Amel Yacht Owners] Bow locker seals
I’ll call in the morning. Just to be sure, the height of the original gasket is 1” or 25mm, correct?
Kent Robertson
S/V Kristy
karkauai@...
USA cell: 828-234-6819
I’ll call in the morning. Just to be sure, the height of the original gasket is 1” or 25mm, correct?
Kent Robertson
S/V Kristy
karkauai@...
USA cell: 828-234-6819
|
By
karkauai
·
#47135
·
|
|
Re: Spinnaker or parasailor
Paul, the Parasailor is not as easy to launch as my Code Zero on a furler but it's less work than setting the pole. There are two ways to set it. The standard way is using 2 sheets and 2 guys
Paul, the Parasailor is not as easy to launch as my Code Zero on a furler but it's less work than setting the pole. There are two ways to set it. The standard way is using 2 sheets and 2 guys
|
By
Joerg Esdorn
·
#47134
·
|
|
Genoa car springs
I need to replace the springs in one of my Antal genoa cars.
The springs and block are attached to the car by a stainless rod that runs from fwd to aft and is dead ended at the aft end.
There is a
I need to replace the springs in one of my Antal genoa cars.
The springs and block are attached to the car by a stainless rod that runs from fwd to aft and is dead ended at the aft end.
There is a
|
By
Alan Leslie
·
#47133
·
|
|
Re: New York: Registration for motorized dinghy / foreign flagged sailboat
I think the fact there is no tender attached to your boat is enough of a signal, don't you?.
Danny'
SM 299
Ocean Pearl
I think the fact there is no tender attached to your boat is enough of a signal, don't you?.
Danny'
SM 299
Ocean Pearl
|
By
Danny and Yvonne SIMMS
·
#47132
·
|
|
Re: New York: Registration for motorized dinghy / foreign flagged sailboat
Personally, I would never put my boat name on my tender, only the registration number eg. T/T Reg 9999. By doing this you avoid the possibility of someone ashore immediately
Personally, I would never put my boat name on my tender, only the registration number eg. T/T Reg 9999. By doing this you avoid the possibility of someone ashore immediately
|
By
seagasm <seagasm@...>
·
#47131
·
|
|
Re: New York: Registration for motorized dinghy / foreign flagged sailboat
Write ”T/T” followed by your boats name on it.
T/T = Tender To
Hälsningar/regards/cumprimentos
Ann-Sofie Svanberg
Skickat från min iPhone
4 aug. 2019 kl. 22:39 skrev Mark Erdos <mcerdos@...>:
Write ”T/T” followed by your boats name on it.
T/T = Tender To
Hälsningar/regards/cumprimentos
Ann-Sofie Svanberg
Skickat från min iPhone
4 aug. 2019 kl. 22:39 skrev Mark Erdos <mcerdos@...>:
|
By
Ann-Sofie
·
#47130
·
|
|
Re: Goiot parts and seals -Rubber Buttons
I will!
Hälsningar
Ann-Sofie Svanberg
Skickat från min iPhone
4 aug. 2019 kl. 23:06 skrev Mark Pitt <mark_pitt@...>:
I will!
Hälsningar
Ann-Sofie Svanberg
Skickat från min iPhone
4 aug. 2019 kl. 23:06 skrev Mark Pitt <mark_pitt@...>:
|
By
Ann-Sofie
·
#47129
·
|
|
Re: New York: Registration for motorized dinghy / foreign flagged sailboat
Alex,
In the USA, yourUSA cruising permit does not include the dinghy. You are required to have astate registration. The guy did you a favor by not writing you a ticket. It doesn’treally matter
Alex,
In the USA, yourUSA cruising permit does not include the dinghy. You are required to have astate registration. The guy did you a favor by not writing you a ticket. It doesn’treally matter
|
By
Mark Erdos
·
#47128
·
|
|
Re: Goiot parts and seals -Rubber Buttons
Hi Ann-Sofie,
I would like four of these if it is not too much trouble. They can be sent to me at
Mark Pitt (S/V Sabbatical III)
WICKFORD COVE MARINA
65 REYNOLDS ST
NORTH KINGSTOWN, RI
Hi Ann-Sofie,
I would like four of these if it is not too much trouble. They can be sent to me at
Mark Pitt (S/V Sabbatical III)
WICKFORD COVE MARINA
65 REYNOLDS ST
NORTH KINGSTOWN, RI
|
By
Mark Pitt
·
#47127
·
|
|
Re: Goiot parts and seals -Rubber Buttons
Hi Ann-Sofie
Be very grateful if you could buy 2 or 3 and post to me in NZ. let me know price and a bank account number and Ill reimburse you
Grateful thanks
John Hayes
Hi Ann-Sofie
Be very grateful if you could buy 2 or 3 and post to me in NZ. let me know price and a bank account number and Ill reimburse you
Grateful thanks
John Hayes
|
By
JOHN HAYES
·
#47126
·
|
|
New York: Registration for motorized dinghy / foreign flagged sailboat
Dear Amelians, I just head a local constable visiting me, asking for my dinghy registration. He sais any motorized boat has to be registered in the State of N.Y. My AMEL is Swiss registered and
Dear Amelians, I just head a local constable visiting me, asking for my dinghy registration. He sais any motorized boat has to be registered in the State of N.Y. My AMEL is Swiss registered and
|
By
Alexander Ramseyer
·
#47125
·
|
|
Re: [Amel Yacht Owners] Bow locker seals
The important thing is that the material should not be so firm and high that it stresses the hinges and will latch down evenly. Too thick or firm would make stress and uneven compression that could
The important thing is that the material should not be so firm and high that it stresses the hinges and will latch down evenly. Too thick or firm would make stress and uneven compression that could
|
By
Danny and Yvonne SIMMS
·
#47124
·
|
|
Re: [Amel Yacht Owners] Bow locker seals
Danny I am sure A represents what Amel installed, but since apparently all manufacturers have cheapened the foam by lowering the density. This is the reason that I believe I would replace it with B
Danny I am sure A represents what Amel installed, but since apparently all manufacturers have cheapened the foam by lowering the density. This is the reason that I believe I would replace it with B
|
By
CW Bill Rouse
·
#47123
·
|
|
Re: [Amel Yacht Owners] Bow locker seals
Ours look more like A
Cheers
Alan
Elyse SM437
Ours look more like A
Cheers
Alan
Elyse SM437
|
By
Alan Leslie
·
#47122
·
|
|
Re: Mango Keel Rust & Repair - Seeking the wisdom of the community
Bill,
Thank you so much! Your document confirms I am not crazy for immediately coating the exposed metal as I work.
I will take another pass at the areas that are weeping. In both of the weeping
Bill,
Thank you so much! Your document confirms I am not crazy for immediately coating the exposed metal as I work.
I will take another pass at the areas that are weeping. In both of the weeping
|
By
Charles Bell
·
#47121
·
|
|
Re: [Amel Yacht Owners] Bow locker seals
I would think A is closest to what I have on Ocean Pearl
Regards
Danny
SM 299
Ocen Pearl
I would think A is closest to what I have on Ocean Pearl
Regards
Danny
SM 299
Ocen Pearl
|
By
Danny and Yvonne SIMMS
·
#47120
·
|
|
Re: Mango Keel Rust & Repair - Seeking the wisdom of the community
Charles,
Here is 1 page from my Amel Book which has 400 pages.
Best,
CW Bill Rouse
Yacht School (formerly Amel School) - Supporting Amel Owners
720 Winnie St
Galveston Island, TX 77550
+1(832)
Charles,
Here is 1 page from my Amel Book which has 400 pages.
Best,
CW Bill Rouse
Yacht School (formerly Amel School) - Supporting Amel Owners
720 Winnie St
Galveston Island, TX 77550
+1(832)
|
By
CW Bill Rouse
·
#47119
·
|
|
Re: [Amel Yacht Owners] Bow locker seals
Hi Kent
I'll measure today, but they are wider than higher but of course they've had a lot of years of compression.
Regards
Danny
SM 299
Ocean Pearl
Hi Kent
I'll measure today, but they are wider than higher but of course they've had a lot of years of compression.
Regards
Danny
SM 299
Ocean Pearl
|
By
Danny and Yvonne SIMMS
·
#47118
·
|