Hi Eamonn, That type of manual switch is called a transfer switch. Did you also install a galvanic isolator in the circuit while you were rewiring the boat? What type of housing did you enclose the

As it happens I’ve just ordered a new nut together with the packing material for our boat. Regrettably the nut is not on stock at Amel, they just ordered new ones themselves but it will be

I bought 8 from Amel while they still had them. I suspect some are still aboard BeBe. Best, CW Bill Rouse Yacht School - Supporting Amel Owners www.YachtSchool.us 720 Winnie St Galveston Island, TX

Mark, We had several of these mushrooms completely missing when we bought our SM ~2 years ago and could not find replacements anywhere. My extremely clever wife Denise came up with a "temporary"

Mark, where did you purchase the globes from? Kind Regards Barry Ferguson

Bernd, I was going to tell you to pressure test the other inlet/outlet of the heat exchanger but you are obviously way ahead of me! Please let is know how this turns out and best of luck to you! --

Hi Bill, i have the same issue with degraded black rubber mushrooms. Did you find a solution? Mark Pitt Sabbatical III, SM 419 Rockland, Maine

You are quite correct, the front does come off to reveal a globe. I was being over cautious removing it but it does clip off. Thank you.

Hi Mark, the Bildge RED pilot light is dead, I was going to have a couple of spares, green, red or whatever available. My fridge and freezer are the type you mentioned previously

Hi Barry, What light inthe panel are you looking to replace? Is this the freshwater pump light? If so,there is a bulb inside the housing. I used these (yellow)to replace the lights on the

Hi Mark, those are somewhat smaller, the hole in the panel is 8mm and yes, these are in the breaker panel. Kind

Is this what you are looking for? This fits into the Amel DCbreaker panal. https://www.bluesea.com/products/8172/LED_-_12_24V_DC_Green With bestregards, Mark Skipper Sailing

I have a 24 VDC pilot light failed and I am trying to locate where I can get the same to replace the existing one without changing the exiting type. Any ideas on the type and brand, thank you. Barry &

Hi Kent & Iris, and the Amel community in general, Sorry I cannot comment on the shelf life of the packing material but I do have a question regarding the packing nut and stuffing box. A small leak

Bill, speaking as one of those who really, really, wants to own an Amel but doesn’t yet have one, I find those “maintenance issues” posts fascinating and one key way to learn more about the

I already isolated the water heat exchanger. Still same. getting the salt water result I checked the freeze point of the coolant versus the sea water. What was in the heat exchanger had the same

My wife and I are thoroughly enjoying our new Amel 50. Personally, I really appreciate the thought (Amel philosophy) that went in to designing our boat. As with anything man-made, our boat requires

James, You do not search for Kerpa photos. In the past some members named photos or albums names that had nothing to do with the photos. Two of our members accomplished the enormous task of renaming

Hi Mark, No hard top on Kristy. I’ll post pics this afternoon. Kent SM 243 Kristy

Good point! A fun Amel pick-me-up for those on here considering an Amel.... met a very cool old French sailor last week, been around the world more than once, pulled up at the dock in a stunning