Hi Duane, That sounds about right, we use 100g give or take a bit and it always seems to work OK. Cheers Alan Elyse Sm437

Hi Tom, If you wish you could pick up a mooring at the Huntington Yacht Club. It would be a nice place to overnight on your way to Southold Please contact me at Kimberlite@... we could get together

Hi Eric, We are hanging out at Liberty Landing for three days. Doing the NYC thing. We will be coming up into LI Sound to visit friends in Southold, then up to Boston. Hope to get back to Martinique

The large lip seal that is glued in from inside and seals the thruster vertical shaft is marked "SOG 60 80 12". The one I had in my spares has rusted along the outer ring where the plastic has gaps

I have the Duo60 watermaker, and we're getting ready to leave the boat for 3 months in Grenada. I planned on sterililzing the watermaker with Sodium Metabisulfite (SM). I also have the sterilizing

Hi Tom, Kimberlite is in Huntington. Do you ever get out this way? Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Joel; this may explain my problem. I got a new wheelcover from Amel for the standard SM wheel. Did not fit.It was clearly made for a smaller diameter wheel. When we were at Amel in La Rochelle I

We did it 2014 in the Carabbien and it still looks as new. Our first attempt was with a withe rope, that was not a good idea, changed very fast to this black one. This is taken

Thanks to all for your suggestions for wheel enhancements. I’m torn between ordering a leather kit from boat leather, versus proceeding along the lines of Annsofie’s decorative braiding. Annsofie,

Thanks Joel great info Courtney s/v Trippin 54 #101 Secret Harbour Grenada 🇬🇩

Thanks Ann Sophie. I vaguely remember that after the composite wheel like the one on your boat was introduced, Amel got about 10 wheels in stainless steel that they forgot to cancel the order on.

We got our replacement from Amel - it even included the leather cover for the wheel hub with a gold embossed "H.Amel" signature on it that was the original design for the SN. Craig Briggs, SN68

To confirm that the metal wheel is changed. This wheel is on S/Y Lady Annila, SM 232 built 1998. Hälsningar Ann-Sofie Svanberg Skickat från min iPhone 6 juli 2019 kl. 12:34 skrev amelforme

If you obtain any of the excellent "mail order" wheel leather kits, there were three distinctly different wheels on the Super Maramu. Two are stainless steel, one is composite. Not sure when the

No such issue on my boat. Joerg Esdorn A55 #53 Kincsem

This is how we did on Lady Annila. This one is to mark ”0” And this is the other two Regards Ann-Sofie on S/Y Lady Annila, SM 232, 1998 Skickat från min iPhone

There is a leather upholstery gentleman near vista mar in Panama. He does surprisingly good work at a very reasonable price. We got steering wheel and new seat etc for 200us. After that then dinghy

Boat Leather is a Preferred Yacht School vendor and they have measurements for SM and 54. Contact Tom Armantrout at Tom"at"BoatLeather.com or 1-206-284-9110 Best, CW Bill Rouse Yacht School

Paul, First I have seen it, but I only have 7 Amel 55 clients, Best, CW Bill Rouse Yacht School (formerly Amel School) - Supporting Amel Owners 720 Winnie St Galveston Island, TX 77550 +1(832)

Hi Tom We replaced ours with a kit from these guys http://boatleather.com/product/boatleather-wheel-covers/ You just need to measure your wheel as they show and order whatever colour you want. The kit