|
Re: VP TMD 22P
Our boat has the TMD22P. I've been using Fram PH8A oil filters, which are a generic brand of the same size. I can find them in most auto parts stores for less than $10. The fuel filter is slightly
Our boat has the TMD22P. I've been using Fram PH8A oil filters, which are a generic brand of the same size. I can find them in most auto parts stores for less than $10. The fuel filter is slightly
|
By
Ryan Meador
·
#45606
·
|
|
Re: VP TMD 22P
Hi Philipp,
You might try a Volvo garage---often the marine and road filters are the same, but the road ones can be much cheaper. Volvo know how much more precious a boat is to its owner than a
Hi Philipp,
You might try a Volvo garage---often the marine and road filters are the same, but the road ones can be much cheaper. Volvo know how much more precious a boat is to its owner than a
|
By
ianjenkins1946 <ianjudyjenkins@hotmail.com>
·
#45605
·
|
|
Re: VP TMD 22P
Hi
I have also a Perkins M80T which is equivalent to the TMD22 A. For me it is not clear if I can order filter for oil and fuel from Perkins or from Volvo. Perkins is much cheaper. Till now I didn't
Hi
I have also a Perkins M80T which is equivalent to the TMD22 A. For me it is not clear if I can order filter for oil and fuel from Perkins or from Volvo. Perkins is much cheaper. Till now I didn't
|
By
Philipp Sollberger
·
#45604
·
|
|
Re: Toe rail pulley and outhaul-furling mounting doughnut
Here’s what I got from Maud.
Dear Mike,
Sorry for my late confirmation. I was on vacation last week. Please find here attached 2 photos of the needed black support for your LEROY SOMER
Here’s what I got from Maud.
Dear Mike,
Sorry for my late confirmation. I was on vacation last week. Please find here attached 2 photos of the needed black support for your LEROY SOMER
|
By
Mike Ondra
·
#45603
·
|
|
Re: Wind Generators
My Superwind does not create any noises or vibrations. It is attached to the mizzen mast via a decoupling device that does not transmit vibrations. It is expensive, though.
Joerg Esdorn
A55
My Superwind does not create any noises or vibrations. It is attached to the mizzen mast via a decoupling device that does not transmit vibrations. It is expensive, though.
Joerg Esdorn
A55
|
By
Joerg Esdorn
·
#45602
·
|
|
Re: Toe rail pulley and outhaul-furling mounting doughnut
Hey, Mike,
What a coincidence. Just today I became aware of my need to replace these Plastic doughnuts. Like yours, mine are fully stress-cracked. Anybody know what they are officially called?
Steve
Hey, Mike,
What a coincidence. Just today I became aware of my need to replace these Plastic doughnuts. Like yours, mine are fully stress-cracked. Anybody know what they are officially called?
Steve
|
By
Steven Bode - SV Intention 1994-SM#117
·
#45601
·
|
|
Re: AMEL 54 main furler
Hi Danny,
Nice – safe winds.
Best Regards Teun
SV AMELIT A54 #128
Leaving NOUMEA NEW CALEDONIA today
May 3, 201906:52:36
Hi Danny,
Nice – safe winds.
Best Regards Teun
SV AMELIT A54 #128
Leaving NOUMEA NEW CALEDONIA today
May 3, 201906:52:36
|
By
Teun BAAS
·
#45600
·
|
|
Re: Wind Generators
Just replaced an ancient Air-x with a Rutland 1200.
The new level of sound from the Rutland is such a nice change from the Air-x. I won't ever complain about the "noise" when I can remember the db
Just replaced an ancient Air-x with a Rutland 1200.
The new level of sound from the Rutland is such a nice change from the Air-x. I won't ever complain about the "noise" when I can remember the db
|
By
Gary Wells
·
#45599
·
|
|
Re: AMEL 54 main furler
OK, this is what I was talking about. This is where the furling motor wire connects. The solenoid allows for reverse polarity, as well. Reversing the polarity causes the reversing of motor
OK, this is what I was talking about. This is where the furling motor wire connects. The solenoid allows for reverse polarity, as well. Reversing the polarity causes the reversing of motor
|
By
CW Bill Rouse
·
#45598
·
|
|
Re: AMEL 54 main furler
Hi Teun, we are heading for the Pacific in July. Planning to head for Bundaberg at the end of the season. Then harbour hopping down the coast to Sydney and south, finishing the Australian explore in
Hi Teun, we are heading for the Pacific in July. Planning to head for Bundaberg at the end of the season. Then harbour hopping down the coast to Sydney and south, finishing the Australian explore in
|
By
Danny and Yvonne SIMMS
·
#45597
·
|
|
Re: AMEL 54 main furler
Hi Danny,
Thanks for your Email.
Looking forward to cruising VANUATU for 4 or 6 months (until cyclone season kicks in) and then maybe towards to SOLOMON ISLANDS, PNG and then INDONESIA etc. or
Hi Danny,
Thanks for your Email.
Looking forward to cruising VANUATU for 4 or 6 months (until cyclone season kicks in) and then maybe towards to SOLOMON ISLANDS, PNG and then INDONESIA etc. or
|
By
Teun BAAS
·
#45596
·
|
|
Re: AMEL 54 main furler
Hi Teun,
I am sure you will enjoy Vanuatu. Tana volcano is amazing, you can stand above the crater and watch it blow. Wow. Then as you go North you will find many places of great interest.
Danny
SM
Hi Teun,
I am sure you will enjoy Vanuatu. Tana volcano is amazing, you can stand above the crater and watch it blow. Wow. Then as you go North you will find many places of great interest.
Danny
SM
|
By
Danny and Yvonne SIMMS
·
#45595
·
|
|
Re: AMEL 54 main furler
BTW
Behind the white velcroed panel in the guest cabin on the A54 mentioned earlier are 2 overload protectors.
When I got the boat the main outhaul had a problem and Bill & I decided to replace
BTW
Behind the white velcroed panel in the guest cabin on the A54 mentioned earlier are 2 overload protectors.
When I got the boat the main outhaul had a problem and Bill & I decided to replace
|
By
Teun BAAS
·
#45594
·
|
|
Re: AMEL 54 main furler
Bill,
Final outcome:
A loose spade connection under AMEL dash board near the switch. Everything else is fine.
I guess the rocking & rolling yday caused this but I believe this connection was
Bill,
Final outcome:
A loose spade connection under AMEL dash board near the switch. Everything else is fine.
I guess the rocking & rolling yday caused this but I believe this connection was
|
By
Teun BAAS
·
#45593
·
|
|
Re: Sailing north to Annapolis
Great spot and very safe best of all free BEER 🍺
Great spot and very safe best of all free BEER 🍺
|
By
Courtney Gorman
·
#45592
·
|
|
Re: AMEL 54 main furler
Hi Bill,
Willie on board. Switch is good.
I didn’t know that next to the white Velcro panel where there are 2 heat breakers when you open the closet door there is at the top a wooden panel
Hi Bill,
Willie on board. Switch is good.
I didn’t know that next to the white Velcro panel where there are 2 heat breakers when you open the closet door there is at the top a wooden panel
|
By
Teun BAAS
·
#45591
·
|
|
Re: AMEL 54 main furler
Hi Ian,
Appreciate your input; especially reminded me of the old cloth. Bill ROUSE has seen the carnage on deck when a local “mechanic” removed the outhaul motor and gear box. It took me
Hi Ian,
Appreciate your input; especially reminded me of the old cloth. Bill ROUSE has seen the carnage on deck when a local “mechanic” removed the outhaul motor and gear box. It took me
|
By
Teun BAAS
·
#45590
·
|
|
Re: AMEL 54 main furler
Hi Arno,
Indeed it seems both of us have spent/are spending a lot of time, energy and money to get our boats back in shape.
There are two relays/solenoids behind the white panel near the
Hi Arno,
Indeed it seems both of us have spent/are spending a lot of time, energy and money to get our boats back in shape.
There are two relays/solenoids behind the white panel near the
|
By
Teun BAAS
·
#45589
·
|
|
Re: Sailing north to Annapolis
I have a reservation for brunswick landing marina and we will be there the end of may. they are selling out fast
I have a reservation for brunswick landing marina and we will be there the end of may. they are selling out fast
|
By
Rob Hughes
·
#45588
·
|
|
Re: AMEL 54 main furler
Bill,
I knew of these 2 boxes but was not aware they were the solenoids; I thought they were resistance breakers.
I will have it checked by Willie this morning. From everything it sounds the
Bill,
I knew of these 2 boxes but was not aware they were the solenoids; I thought they were resistance breakers.
I will have it checked by Willie this morning. From everything it sounds the
|
By
Teun BAAS
·
#45587
·
|