The Leroy-Somer bow thruster motor on my SM Pure Magic failed with sparks & some smoke from within the commutator cage. There is just one rewind facility locally which I used having heard from Amel

Yes, stopping the air input does work, but…it can be seriously hazardous to the palm of your hand if you do it by hand as the depression is quite strong. On the other hand (pun intended), if you use

Dear friends: After I bought Ipanema 10 years ago we had two years of struggle trying to prevent the leak of water through the bow thruster. About 8 years ago we had a long discussion on this forum

Hi, This is not a light weight topic. There are serious dangers involved. First. The comment about shutting off the fresh air supply. I presume this reffered to blocking the air intake. A hand put

useful information. Thanks Mark, thanks Kelly fair winds Donato SM #468 Ocean bird -- ___/)_____/)____/)_____ Ing. Donato Valente mobile:+39 392 5390810 Skype ID: donato.valente

Or .... Shut off the fuel via the shut off valve. Takes longer though. Jean-Pierre

Donato, I think I fixed the link. If not, use the link in Kelly and Ryans first post that says the part number SPR-A007. -- Mark McGovern SM #440 Cara Deale, MD USA

Mark, glad this worked for you! 😀 Donato, try this: https://store.eurtonelectric.com/31x31x6brushspr-a005-1-1-1.aspx (Or try the hyperlink in my first message; that worked for me when I checked

Mark, Apparently the link you posted leads to a ‘page not found’. Would you please send it back ? Or detail the specs ? Thanks Donato SM 468 Ocean Bird

Thanks to Kent for this: Best, Bill Rouse 720 Winnie St. Galveston, Texas 77550 832-380-4970 My Calendar Yacht School

No doubt that Kelly and Ryan found something that will help many Amel owners. Good call. Best, Bill Rouse 720 Winnie St. Galveston, Texas 77550 832-380-4970 My Calendar Yacht School

I had a similar problem, the piece disintegrated. For an interim fix I used a SharkBite fitting available at any hardware store. I would not use this as a permanent replacement due to the conditions

Wery easy to do you stop the fresh air input .....:-) JLMERTZ CottonBay Le 09/06/2019 à 20:23, CW Bill Rouse a écrit : Garanti sans virus.

Thanks Kelly and Ryan for the information! These worked perfectly in our Leroy Somer MBT86M Main Furler and Outhaul motors. Our main furler stopped working under any load at the end of last season.

What is the best way to shut off a TMD22 when there is no power available to use the normal shut off method? -- Best, Bill Rouse Yacht School 720 Winnie St Galveston Island, TX 77550 +1(832)

An update on the hawse pipe replacement. After consideration of the many options and suggestions, I did a cheap and easy installation with schedule 40 PVC and standard fittings. If it doesn’t hold

Oliver I am replacing all standing rigging, including turnbuckles. They are from 2009. Regarding price, you can call Laetitia Boudon from ACMO ( laetitia@... ) and get a quote for your model and

We wanted to change the solenoid valve for the forward toilet and lost that part which is inside the plastic connector/tube. Without it water is dripping. Does anyone have an idea if there is a chance

Hello,, does anybody know how and if possible to grease the rudder hinges on an AMEL54? We are on the hard and there is grease in the hinges but do I need to fill it up somehow? Oliver from Vela

Hi kent I wish. Danny