|
Re: Eno Stove Electronic Ignitor
Contacts on the start switch needs cleaning maybe. Use multimeter to check continuity.
Contacts on the start switch needs cleaning maybe. Use multimeter to check continuity.
|
By
Stephen Hancock
·
#45428
·
|
|
Eno Stove Electronic Ignitor
Hello all,. I have the original ENO 4 Burner stove/oven.
The electronic ignitor has stopped sparking.
The battery is good. I have cleaned around the ignitors on each burner on the stove and in
Hello all,. I have the original ENO 4 Burner stove/oven.
The electronic ignitor has stopped sparking.
The battery is good. I have cleaned around the ignitors on each burner on the stove and in
|
By
Dan Carlson
·
#45427
·
|
|
Re: Insurance update US East Coast & Bahamas- Pantaenius US
Thank you Duane!
By
James Cromie
·
#45426
·
|
|
Re: Troubleshooting SSB
I also replaced the tuner to aerial wire, and I dropped the antenna to the deck to clean the screw joint in the middle.
Made a difference.
Ian
Ocean Hobo SN96
I also replaced the tuner to aerial wire, and I dropped the antenna to the deck to clean the screw joint in the middle.
Made a difference.
Ian
Ocean Hobo SN96
|
By
Ian Park
·
#45425
·
|
|
Re: Troubleshooting SSB
Duane,
We found that replacing the wire between the tuner in the lazarette and the base of the antenna took care of our transmission issues last year. It was corroded and fell apart as I removed the
Duane,
We found that replacing the wire between the tuner in the lazarette and the base of the antenna took care of our transmission issues last year. It was corroded and fell apart as I removed the
|
By
Steve Morrison <steve_morrison@...>
·
#45424
·
|
|
Re: Insurance update US East Coast & Bahamas- Pantaenius US
James, here are the deductibles:
Value/Limit Deductible Premium
Hull Coverage
James, here are the deductibles:
Value/Limit Deductible Premium
Hull Coverage
|
By
Duane Siegfri
·
#45423
·
|
|
Troubleshooting SSB
My SSB (installed by Amel) is no longer transmitting. It was working up until a few months ago. I'm looking for troubleshooting ideas??? It still receives just fine.
I checked the ground connection
My SSB (installed by Amel) is no longer transmitting. It was working up until a few months ago. I'm looking for troubleshooting ideas??? It still receives just fine.
I checked the ground connection
|
By
Duane Siegfri
·
#45422
·
Edited
|
|
Re: SM Chain Counter
Thanks for your insights. I’m pretty sure the old sensor is blown because when it is online, the fuse on the Sailor 24V->12V transformer blows.
I’ll be on the boat in a couple of weeks and work on
Thanks for your insights. I’m pretty sure the old sensor is blown because when it is online, the fuse on the Sailor 24V->12V transformer blows.
I’ll be on the boat in a couple of weeks and work on
|
By
Thomas Peacock
·
#45421
·
|
|
Re: wind data to Raymarine ST 6000
Hi Gary,
The plot thickens, all very interesting. At the end of the process, if the view is that the response of the autopilot to wind shifts is too slow to be practical I see no point in the
Hi Gary,
The plot thickens, all very interesting. At the end of the process, if the view is that the response of the autopilot to wind shifts is too slow to be practical I see no point in the
|
By
ngtnewington Newington
·
#45420
·
|
|
Re: wind data to Raymarine ST 6000
Hi Nick: What I have to say applies to my 2001 vintage B & G 2000 FFD (full function display), B & G Hydra 2000 processor, and Raymarine ST7000+ autopilot. I am going from my Cadd drawings from 18
Hi Nick: What I have to say applies to my 2001 vintage B & G 2000 FFD (full function display), B & G Hydra 2000 processor, and Raymarine ST7000+ autopilot. I am going from my Cadd drawings from 18
|
By
Gary Silver
·
#45419
·
|
|
Re: wind data to Raymarine ST 6000
Hi Peter,
Thanks for your response.
I am going to the boat on 25th April so will check, but I think that I tried Terminal 21/22 and 22/23 in the autumn when I was last on the boat, and it did not send
Hi Peter,
Thanks for your response.
I am going to the boat on 25th April so will check, but I think that I tried Terminal 21/22 and 22/23 in the autumn when I was last on the boat, and it did not send
|
By
ngtnewington Newington
·
#45418
·
|
|
Re: wind data to Raymarine ST 6000
Herer is the attachment, Chapter 6.6.2 out of the User Manual
Herer is the attachment, Chapter 6.6.2 out of the User Manual
|
By
Peter Jaeger
·
#45417
·
|
|
Re: wind data to Raymarine ST 6000
Dear Nick
I assume you have a Hydra 2000 Processor and you connected the Autopilot NMEA Input port to the NMEA Output 1 of the B&G Processor on Terminal 21/22 or 22/23 for NMEA Output 2 (see
Dear Nick
I assume you have a Hydra 2000 Processor and you connected the Autopilot NMEA Input port to the NMEA Output 1 of the B&G Processor on Terminal 21/22 or 22/23 for NMEA Output 2 (see
|
By
Peter Jaeger
·
#45416
·
|
|
wind data to Raymarine ST 6000
Hello fellow Amel owners. I still have not managed to get the Raymarine to steer to wind. I will be single handing up to Madeira and it is likely to be upwind, so having the autopilot follow the wind
Hello fellow Amel owners. I still have not managed to get the Raymarine to steer to wind. I will be single handing up to Madeira and it is likely to be upwind, so having the autopilot follow the wind
|
By
ngtnewington Newington
·
#45415
·
|
|
Re: Insurance update US East Coast & Bahamas- Pantaenius US
Just curious if anyone has had any claims experience with Novamar? How well do they follow-up and how quickly do they pay?
--
Mark & Debbie Mueller
Brass Ring A54
Just curious if anyone has had any claims experience with Novamar? How well do they follow-up and how quickly do they pay?
--
Mark & Debbie Mueller
Brass Ring A54
|
By
Mark & Debbie Mueller
·
#45414
·
|
|
Re: Insurance update US East Coast & Bahamas- Pantaenius US
Hi Duane -. I am wondering what deductible you have for your policy.
I'm also considering Novamar.
Thanks.
James
Soteria 347
Culebra
Hi Duane -. I am wondering what deductible you have for your policy.
I'm also considering Novamar.
Thanks.
James
Soteria 347
Culebra
|
By
James Cromie
·
#45413
·
|
|
Re: Anchor Chain Size and Length
Thank you Jean-Pierre.
I spent 3 seasons in the S. Pacific with my previous boat, Lagoon 450. I used NZ for off season, which was ideal. I had an unforgettable time... I plan to go again with my A50.
Thank you Jean-Pierre.
I spent 3 seasons in the S. Pacific with my previous boat, Lagoon 450. I used NZ for off season, which was ideal. I had an unforgettable time... I plan to go again with my A50.
|
By
Theo s/v Paloma
·
#45412
·
Edited
|
|
Re: Insurance update US East Coast & Bahamas- Pantaenius US
I just recently signed up with Novamar thru the broker Mark on Cream Puff recommended. For $360,000 agreed value including dinghy and $10,000 in personal goods, with coverage including Grenada for
I just recently signed up with Novamar thru the broker Mark on Cream Puff recommended. For $360,000 agreed value including dinghy and $10,000 in personal goods, with coverage including Grenada for
|
By
Duane Siegfri
·
#45411
·
|
|
Re: SM Chain Counter
Our original Amel chain counter had always worked perfect till we arrived in the Caribbean. I tried everything to fix it myself to no avail then asked Amel here in Martinique who put me onto Pouchon
Our original Amel chain counter had always worked perfect till we arrived in the Caribbean. I tried everything to fix it myself to no avail then asked Amel here in Martinique who put me onto Pouchon
|
By
Colin - ex SV Island Pearl
·
#45410
·
|
|
Re: Dominican Republic
We've been to Samana twice and also Luperon. It definitely feels like a police state and this is the last place in the Caribbean I would want to have a problem with customs. The Army, Navy,
We've been to Samana twice and also Luperon. It definitely feels like a police state and this is the last place in the Caribbean I would want to have a problem with customs. The Army, Navy,
|
By
Thomas Kleman
·
#45409
·
|