Hi Barbara, that puts us at 9 + (6 boats with three couples)interested so far. Two have Perkins, two have Yanmar 4JH series, and two have Volvo TMD22s. I doubt we’d be lucky enough to find a

Hi, We are 2 coming from Italy. Available July but not August or September. Our motor is Perkins 4154. Our goals are trouble shooting, repairs, etc. Thanks

Thanks, JP! Kent Robertson S/V Kristy karkauai@... USA cell: 828-234-6819

Greetings all, I have been reviewing my SPARES holding in preparation for a few years out there in the South Pacific, and updating my current reference material. Below, condensed information / brief

Hi Gang, From a good friend, superb diesel wrenched, the Volvo is a rebranded/repainted Perkins M80T. If the class providers can arrange a Volvo, all should go well. Lovely initiative regarding engine

Hi Arlo, So far I have 6 interested and one 75%. Three have the Volvo TMD22, two have Yanmars, and you with the Perkins. I doubt we’d be lucky enough to find a class with all three engines (or

Greetings all, Below, condensed info / brief data sheet for the Starter Motor for the YANMAR 4JH3-HTE. Hoping this will be of use to others. Blue skies, David SM#396/Perigee Panama +++++++ OEM

I would be interested in a the class if they have my engine, the perkins 4-236M. Interest level is everything from routine maintenance to repair. As long as its in the U.S. I can make most dates work

Cool! Iris, too! Kent Robertson S/V Kristy karkauai@... USA cell: 828-234-6819

Greetings all, Attached, 2019 latest price list for the SPURS Line-cutter and accessories. Contact: Bryony Fisher; Bryony@... Spurs Marine Mfg. 201 SW 33 STREET FORT

Hi Kent; Thanks, If it helps, my wife Aty will also be attending. Respectfully; Mohammad Shirloo +1-323-633-2222 Cell +1-424-644-0908 Fax

Mike and Mohammad So far it’s just the three of us, unless more express an interest, I’m sure that won’t be enough to have a special class for Amelians. Mark Erdos had a good experience with a

Hi Woody, I don’t know if they would allow us to video it or not. If so, I could set up a go pro and just videoed the whole thing. If that’s possible I will see what I can do. Kent Robertson S/V

Thanks Mark, good to hear. I contacted them this morning. Kent Robertson S/V Kristy karkauai@... USA cell: 828-234-6819

When I bought my A55 four years ago, I received the standard advice that it's good for a diesel to be run at full throttle once a day for something like 3 minutes. I've followed that advice when I've

Kent, There is a verygood diesel class in Annapolis at the Annapolis School of Seamanship. It isdivided into two parts, the first two days being basic maintenance and secondtwo days being advanced

Sounds like a superb idea Kent but I bit far for us unfortunately - currently in Med. Just a thought but would it be possible to video such a course? I know it's no substitute for getting your hands

You Know the harbor. Please give me a shout if you come by.

Hi Eric, We have used McMaster in the past. Thanks for the tip! We will dig around more before doing anything drastic. Headed back to Boston, maybe we will see you in Huntington? kelly + ryan SM233

Thanks Eric. The ones that Gaetan (or maybe Alban) gave us were definitely allen drive flat heads, not cap heads. I've attached a photo. We replaced them with the same screw, just with Phillips