Hi all, I've been using the Marco UP6/E pump for domestic water for almost 6 months now. I've been quite happy with it. I regularly check the Mass- and Mass+ switch on my A54 to ensure no electrical

Hi folks, I'm happy owner of Supermaramu 2000 redline #443 ; someone could tell me the right zinc for the propeller thank you Alessandro GRAND CRU #443

Terrific!

Yes! Thanks Gary and Andrew—and Bill. This is SO much easier to navigate and we’re so appreciation to all you are doing to make this a great place to learn and grow and share.

Hi Eric, I would never suggest you were a big man with a big hammer as I described in my very valid warning. I described the man and hammer provided by the Shelter Bay Marina yard against my wishes.

Yes Dan it most certainly does. I had to remove my windlass at one stage and that bolt sheered off. I put the windlass back in place (temporarily) without that bolt and it very noticeably flexed the

Thanks Craig.

Being a big man with a big hammer,it really depends on what you hit with the hammer and how much force you use with the hammer. After supporting the boom upside down I gently used the Big Hammer on

Hi Tom, Does your hawse pipe run vertically or is it slanted like mine on my Santorin? On mine a standard 90° flange wouldn't work. Also, even with an access door, working on the underside of the

Hearing how the bolt went through a tab on the pipe, could the explanation be that the galvanized pipe provide extra rigidity to reduce the deck from flexing when the windless was pulling up an

Gary, On my Santorin the original pipe didn't have a tab on top. The pipe end was cut at an angle to be flush with the underside of the deck and simply glassed to the bottom of the deck with a fillet.

Arlo, most items these days are generally available from hardware outlets for example, https://www.bunnings.com.au/kinetic-chrome-handspray_p4790532 here in Australia and New Zealand. An identical

The Tab at the top of my galvanized hawse pipe had one of the windlass bolts thru it and encased in fiberglass before it rusted away. I still have to replace the pipe and some of the floor. Tom Deasy

The brand is Grohe – I seriously doubt if the same model wouldstill be available that was used on the SM. The home industry changes modelsand styles frequently. The closest they have to day would be

Kudos to the editors Sv fiasco

Thanks Bill I will check it out. Really appreciate this new platform and all the support you give to the group and me!

Arlo, SM fixtures are made by GROHE. The attached might help you. Best, Bill Rouse 720 Winnie St. Galveston, Texas 77550 832-380-4970 My Calendar Yacht School

All, You are probably not aware that SM owner Gary Silver has edited almost 600 of your photos in the photos section of this website and SM owner Andrew Lamb has also been updating and editing photos.

Hello all. I have a 1985 Amel Mango hull # 46. I am looking to replace the faucet and shower head with a new one. Would like to use the same model or perhaps one that Amel used on the Super Maramu.

And a pvc conduit for wiring from fore to aft in the cockpit locker... And the air intake to the engine room. And... ? Bill Kinney SM160, Harmonie Mayaguana, Bahamas