Hi Pat, I had the same problem on my SM once, I just couldn’t find a leak. Turned out that the 3 way valve at the filter for the water maker didn’t close 100%. I simply installed a cock before

Pat, Sorry, can’thelp with the leak but thought you’d find this a good read since you are anchoredthere:

Ahmet, There is a small Phillips head screw on the side of therotating blade. This is removed and where the grease nipple is attached. Item#7 in the diagram below. If your prop is painted, this

For over a month my water pump comes on for a second,every 15 minutes or so. I have not been able to find any leaks. I just thought of one possibility, a leak in a valve for flushing the membranes

Hi everybady, I would like to grease my bruntons propeller according to bruntons maintance instruction but I couldn’t find any similar greas nipple hole on my propeller. My one seems an older model,

Hi Teun Recall she was looking for $225k. My yacht longer and 5 years younger cost NZ 150 tax paid in NZ. Of course spent a lot more now and I’m on my way across the harbour as I send this to

John, Not sure it is the same boat; can very well be. I have met & know the lady you mention but have not seen her since I left NEW CAL 3 ½ months ago. The boat listed on the bulletin

Steve, You should also post this email in Yachts For Sale, which is a subgroup of the Amel yacht Owners Group. -- Best, Bill Rouse Yacht School 720 Winnie St Galveston Island, TX 77550 +1(832)

Hi Miles I have replaced just about all the blocks with Garhauer brand however they don’t seem to work so well on the jib track12 mm. maybe contacting them directly would be a solution I thought

Steve, SM 380 is a great SM. She will be a safe and comfortable home for new owners to cruise anywhere in the world. Please stay in touch. Best, Bill Rouse 720 Winnie St. Galveston, Texas

Greetings all. TouRai has been a wonderful home for us over the last few years, but we are soon shifting our family of 4 to a catamaran (Privilège 495) to complete the next 5 or so years of our

Hi Jeroen, Thank you for the information, we will look at these options, All going to plan and given we do not plan not be on the yacht June/July/august we may even consider placing

Pretty sure I looked at it a couple of years ago… The male partner died his lady from South America had inherited and was selling it; but wanted an unrealistic price…………high by even

Just returned last week to my boat in NOUEMA - NEW CALEDONIA and noticed on the Marina bulletin board an AMEL MARAMU 46 1986 for sale. The note says that she is ready & equipped for a round the world

Hi Dean, I’ll give you a shout in August as suggested - look forward to meeting you and buying you that beer :o) Best wishes, Scott

Scott, No problem, drop me an email in August and we can organise it. Mark, Not cruising Scotland as such, just arriving there at some stage over the summer. Currently in Greece. Cheers Dean SY

Hi Steve, the marina's Masnou and Premia just North of Barcelona are very reasonable . close to Barcelona airport and 100M distance from Mallorca . Jeroen Jeltes Fidelis Amel 54.

Arno, Good advice, and explains why the red light did not come ON. Best, Bill Rouse 720 Winnie St. Galveston, Texas 77550 832-380-4970 My Calendar Yacht School

To me this sound like the thermal protection on the 24 volt motor is activated. Did you check the temperature of the motor? Regards, Arno Sv Luna A54-121

Thank you Giorgio. I have head about them recently from another Amel owner too so will visit them next week when we get to Martinique. Cheers Colin SV Island Pearl II, sm #332 Pinney Beach, Nevis --