Hi James, In company with another boat owned by a former Minister of the French Govt, we encountered few problems except the incredibly bureaucracy to check into the islands. MIND YOU, THIS WAS LAST

Hi Dan, This is how I removed the disk The 3 bolts worked quite well. It took a bit of time but I did get it off. You will need a number of different length bolts. If I remember correctly the

James, we also stored our SM#387 at Peake Yacht Services from June 2017-Nov 2018. We were pleased with the yard and the services. We did not have much work done, but would go back again. We hauled

Alan, that sounds like good performance from your anchor chain. We just purchased the same this past November. Can you give me an idea of how much you use your anchor each year and where you are

Well after several of you have posted about anchor locker repair and the like, I have decided to inspect mine and do some maintenance on them before they get to be a problem. They are in need of some

Just want to jump in maybe in ignorance but motivated by caution. Mention of cutting and torches raises an alarm bell with me. I have SM37 with a steel cdrive. A friend has a close hull number with

Unfortunately yes... The rubber bushings were so far gone it started to warp the 4 bolt holes in the aluminium hosing. The 4 studs also showed cracks by 2 of the studs. So this was long overdue.

Hi Dan. are you sure the outer housing is beyond redemption?. Ie is the internal shape seriously compromised. External rust is not a reason to replace. It is seriously difficult to remove from the

Hoping someone can provide some wisdom for removing what I believe to be the original vetus coupler. Unfortunately is has gone past its prime and a new one is needed. That said we have used a wheel

Isn't it nice to have active customer support? :) See you soon, Gary

The Groups.io Developer changed something in the Photos album that you may not notice. There is now a sort button located in the upper right. The default sort is newest first. If you change the photo

Thanks Mark, good to hear and very convenient! Paul S/Y Ya Fohi - Amel 54 #98

Thanks Bill....done that...dumped the yahoo address this is MUCH better Well done mate ! Cheers Alan Elyse SM437

We replaced ours in 2014 with 100m of Maggi Aqua G4 10mm. We end for ended it last year and it is performing very well. The most important issue is to ensure the chain link size fits the gypsy on your

Hi Eric, It doesn't seem to be that big a deal, take a look at : https://www.gps-repeaters.com/blog/gps-week-number-rollover-april-6th-2019/ Where they say : "This situation won’t affect a

OK, I now know that the AC motor is: 0.75kW (1 hp) 1400 rpm 220 V AC Does anyone know, or could measure, the shaft size ? 19mm seems pretty common for cement mixer motors with the above specs. I'm not

If you look for Palma try La Lonja Marina. I paid 2.000 € per month in July/August. But if you need the place for months Valencia, near Barcelona or Alicante should be much cheaper. If you don't

Thanks for the info Ryan. I am actually more concerned about the April 6 gps time change. Fair Winds Eric Kimberlite Amel Super Maramu #376

I'm not terribly surprised by this news -- CompactFlash is an ancient standard introduced in 90s. SD has taken over most of the market. Chart plotters that are old enough to use CF and owned by

Thanks Bill, We are looking at various options so suggestions are most welcome i just thought i would put it out there on the off chance someone may know or have something due to