Mark/James, I'm not aware of the PDF you are referring to but there is a folder in the Photos section of the forum that has a bunch of great pics from Gary Silver and Bill Rouse called "Dessalator

James, You’re welcome.I also failed to mention Gary Silver did a very detailed pdf about changingmembranes. I do not recall where it is on the forum (perhaps someone else canprovide a

Thanks Mark! I did not realize the extent of the online library on the owners group! -James

Mike, No problem. I plan to keep a few sets of completed pulleys "in stock" so if those don't work out I will have some. And just to be clear my machine shop is actually MY machine shop. I own a

Hello Friends - I am about to embark on changing the two membranes in my Dessalator Duo 60 (160L/hr). I have Super Maramu 2000, #347. I am interested to hear of the experience others have had

James, In the FILESsection of the forum there are very detailed instructions. https://groups.yahoo.com/neo/groups/amelyachtowners/files/Dessalator%20Technical%20Info/ With bestregards,

For those visiting this website looking for an older model Amel, I uploaded a file with all the details and pictures of a 1986 Sharki named JOSS. I am helping the owner (not commercially) to sell his

Hi Porter It will come out, just a bit shoehorned. Make sure you protect the mast paint to avoid chipping. I used a single layer if sunbrella and it went ok. Mohammad is right that the spacers

I agree with Bill K, I have a 12 mm Vectran line, works very well. Paul on SY Kerpa SM 259 now in Culebra

.... annnnd... I forgot my signature ;) Gary W. S/V Adagio, SM #209 Virgin Gorda

I can't say about the actual rough idle, but I ~thought~ I had a rough idle. Turned out that the metal exhaust muffler was just touching, and therefore rattling, on the engine room floor. A new

Hi Mark, I am going to hold off on ordering the stainless sheaves for now since I already have Bernard’s PETP pulleys and his additional explanation below which I will test out and perhaps modify

Paul, Vladimir, and Ian, You guys are good. I will send you emails offline. Thanks to you all for the support on this project. Mark McGovern SM#440 Cara Deale, MD USA

Alex, New England Ropes makes a Vectran cored line called "V-100" that has very low stretch, a high friction polyester cover, is available in 12 mm, is very tolerant of going around the small diameter

Alex, Originally on early 54s the line was 10mm kevlar core, polyester sheath. Amel now recommends 12mm. You probably will not find kevlar. Use a core fiber that has the less stretch. Do you know how

Dear Amelians, I had all lines of my 54 replaced two years ago in Florida. It turns out that the line in the boom which is pulling the mainsail ,doesn't hold the sail in its position, even if the

Mark, I'd be interested if it's still possible. Thx. Ian & Margaret S/V Loca Lola II SM153 smlocalola@...

I am also interested. SM 345 "Life is Good" Vladimir Sonsev 202 258 1916

Hi Mark, I would be interested in two pulleys too, if you still have a couple available! Shipping to France or US if easier. I will write to your email. Mine is carpathia3 at yahoo dot com. Many

Mark, I would like a pair as well if they are not all spoken for. Thank you for all your efforts on this one. Please shoot me an email when you have a chance (paul dot stascavage at icloud dot