https://svcerulean.com/2015/05/07/galley-projects-new-faucet-salt-water-spigot-and-3m-water-filter/ I purchased a faucet from

Thanks Kent, and everyone else that replied with data and knowledge on this subject: I have collated the following data from the RigRite dot com web site and the Goiot-Systems dot com web sites:

Thank you. That is very attractive. Unfortunately, it is the bottom part of my faucet that broke!

Thanks! Ian

Hi James, I used Dow Chemical’s Dowsil 795 silicone sealant. It comes in a grey color that works well in the hatch. Kent SM 243 Kristy

Sorry Loraine should have read Lofrans. Should check the speak check before sending!

Ian Just measured mine. I believe the Lorraine’s on the Santorin is the same size albeit a 12v version. My rubber caps are 30mm across the base and 20mm high. Ian

Hi All, A while back some of us were looking to replace the rubber caps on the switches that Amel had put on top of the Lofrans winches--without having to spend 14 Euros each for a new switch. I may

New faucet in my Sharki : https://www.leroymerlin.fr/v3/p/produits/mitigeur-douche-reglable-male-15-x-21-e1400633744?queryredirect=a_fp_mitigeur_douche_reglable__male_15_x_21&numpage=1 Dom

Kent - What adhesive did you use to affix the new plexiglass to the hatch frame? -James Soteria 347

Pat - I am currently in Culebra and plan to in and out of Ensenada Honda through March. If no one else is interested in some of the spare material you have, I’d be interested in some of it! I’d

Any SMs with a Volvo D2-75 repower care to comment on their experience? Good? Problems? Power adequate? How did you handle the galvanic isolation issue? Thanks, Paul C. SM238 "Maracuya" Martinique

We have had a failure of our galley faucet on our Sharki. It looks like the new one Andy on PALADIN purchased from the German catalog would be a great replacement. The posting is from 3 years ago --

Hi Gary, I can confirm the Tradition and Cristal hatch models. I replaced the lens over the forward head with clear plexiglass, cut locally to match the old lens. I scuffed it up with a random

Gary, I just bought a large roll of semi opaque material that I applied like a decal, floated on with water ,squeegeed on to my main cabin hatch. Looks identical to the other hatches. It cut down on

Hi Gary. Not sure of anything except Amel sanded those two hatches, with a jitterbug, to opaque those hatches for privacy. Pretty sure your guesses on the colors are correct. All The Best, Joel JOEL

Hi All: First post on the new site. Really great search engine here, but wasn't able to find this info. Doing the research to replace a couple of lenses on my Goiot hatches as they are starting to

There is a recent episode of Delos where Brian shows you how he repacks the rudder gland. It one of the episodes where they do boatwork on Grenada,

The point is that I wanted to also the EM boxes available as a backup. Also I wanted to protection to work both on furling and unfurling. I did think about the argument that the majority of power is

Hi Thomas, I install the packing with a axel grease on the rudder post and the perimeter of the inside of the stuffing box. I drive the stuffing down with a large diameter piece if PVC pipe and a