Hi Ian Does yours look like this http://www.bepmarine.com/en/1001501 If so mine has a 20mm ID which is the critical dimension I think along with height My cover and it’s spare are now cracked so I

Hello Paul, We have an ACP 400 with Lecombe & Schmidt hydraulic drive; we are very pleased as it is much smoother and steers the boat well through the a single P70 control.(I have a spare P70 if

Kent, how did you remove the original plexiglass from the frame? Barry Tradewinds III SM #171

I have replaced all my instruments to Raymarine and also a new ACU 400 Autopilot computer, They all do communicate via NMEA 2000, and it work OK. I can steer in wind vane mode or in track mode with

If anyone ever finds a drop in replacement for the Eumeniadishwasher, please post it. I have repairedours so many times. I am just waiting for the sad day when it finally goes tothe appliance

Thank you Kent. James

I just discovered a leak coming from the corroded water inlet solenoid at the base of the Eumenia dishwasher. By looking online I think I have found a replacement part on eBay from Calder Catering

https://svcerulean.com/2015/05/07/galley-projects-new-faucet-salt-water-spigot-and-3m-water-filter/ I purchased a faucet from

Thanks Kent, and everyone else that replied with data and knowledge on this subject: I have collated the following data from the RigRite dot com web site and the Goiot-Systems dot com web sites:

Thank you. That is very attractive. Unfortunately, it is the bottom part of my faucet that broke!

Thanks! Ian

Hi James, I used Dow Chemical’s Dowsil 795 silicone sealant. It comes in a grey color that works well in the hatch. Kent SM 243 Kristy

Sorry Loraine should have read Lofrans. Should check the speak check before sending!

Ian Just measured mine. I believe the Lorraine’s on the Santorin is the same size albeit a 12v version. My rubber caps are 30mm across the base and 20mm high. Ian

Hi All, A while back some of us were looking to replace the rubber caps on the switches that Amel had put on top of the Lofrans winches--without having to spend 14 Euros each for a new switch. I may

New faucet in my Sharki : https://www.leroymerlin.fr/v3/p/produits/mitigeur-douche-reglable-male-15-x-21-e1400633744?queryredirect=a_fp_mitigeur_douche_reglable__male_15_x_21&numpage=1 Dom

Kent - What adhesive did you use to affix the new plexiglass to the hatch frame? -James Soteria 347

Pat - I am currently in Culebra and plan to in and out of Ensenada Honda through March. If no one else is interested in some of the spare material you have, I’d be interested in some of it! I’d

Any SMs with a Volvo D2-75 repower care to comment on their experience? Good? Problems? Power adequate? How did you handle the galvanic isolation issue? Thanks, Paul C. SM238 "Maracuya" Martinique

We have had a failure of our galley faucet on our Sharki. It looks like the new one Andy on PALADIN purchased from the German catalog would be a great replacement. The posting is from 3 years ago --